Silhouette SPX Compose Owner's manual

SPX Compose
Technical Instructions

Inclination
3. Enclose temple edge firmly and
adjust inclination on titanium
side part in direction shown.
1. Hold lens fixation firmly with
mounting pliers.
2. Open temple completely.

Adjusting Temple Opening
Reduce Enlarge

Temple Disassembly
1. Place disassembly tool
at hinge to stop. Select
diameter of round stick
closest to the distance
between temple and
lens.
2. Close temple and
press behind round
stick.
3. Temple will loosen
with a click.

Hinge Greasing with Teflon
After cleaning, grease inside loop of hinge with Teflon high precision
lubricant from mounting box P 0033. Ready to mount temple.

Temple Assembly
PRESS
2. Apply counter pressure on frame
side part.
3. Press SPX temple into titanium
side part.
1. Place side part exactly at holes of
the SPX temple.

1. Warm up SPX temple with heater
to maximum 70°C (158°F) for
approx. 2 minutes.
Adjusting Temple
2. Shape ergonomics of temple and
hold at room temperature until
temple has cooled down.

Adjusting Temple End Behind Ear
−Titanium inlay inside temple end enables cold adjustment.
−Curve temple in large movements.
−If necessary only slight heating to a maximum of 70°C.
−Do not bend!