SilverStone argon series User manual

NO.G11232520
Warranty Information
This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.
Warranty terms & conditions
Additional info & contacts
For North America ([email protected])
SilverStone Technology in NorthAmerica may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMAprocedure with SilverStone Technology
in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only ([email protected])
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe ([email protected])
For all other regions ([email protected])
ARGON
Advanced low-profile heatsink with
Heat-pipe direct contact (HDC) technology
AR11
SERIES
*Touseon CPUs with TDPgreater than 95W, a case with efficientairflow is required.
Designedforlow profile system at 47mm tall
FourØ6mmheat-pipes and aluminum fins for excellent heatconductingefficiency
Heat-pipedirectcontact (HDC) technology
Includescompact92mm PWM fan for excellent cooling andlownoise
Tightly bended heat pipes reduce installationinterference
Forusewith CPUs up to 95W or more*
IntelSocketLGA1150/1151/1155/1156 compatible
SpecialFeatures
ModelNo.
Material
Application
HeatPipe Type
CoolingSystem
Noise
BearingType
Voltage Rating (V)
StartVoltage(V)
AirFlow (CFM)
Speed(R.P.M.)
LifeExpectance
NetWeight
Dimension
SST-AR11
Copperheat pipeswith aluminumfins
IntelSocket LGA1150/1151/1155/1156
Ø6mmheat-pipe x4
92mmx 92mmx 15mmfan
44.5dBA(Max.)
Dualball bearing
12V
6V
55.76CFM(Max.)
1200~ 3000RPMwith PWM
70,000hours
290g
97mm(W) x94mm (D)x 47mm(H) (withfan)
Specification
AR11
e
si
g
nedforlow profile s
y
stemat47mm tall
ou
rØ
6mm
he
at-
pip
es
and
al
umi
num
fi
ns
for
ex
cel
len
th
eat
co
ndu
cti
ng
eff
ici
e
e
cialFeatures
1
1

1
2
3
4
Aplique de forma uniforme la pasta
térmica incluida en la CPU
付属のサーマルグリスをCPUに均一に塗ります
Apply included thermal grease onto the
CPU evenly
Равномерно нанесите термопасту
на процессор
Beigefügte Wärmeleitpaste gleichmäßig
auf dem Prozessor auftragen
將內附散熱膏均勻塗抹於CPU
Applicare in modo uniforme il grasso
termico incluso sulla CPU
장착 브래킷 위에 육각 나사와 해당
너트를 설치합니다
将内附散热膏均匀涂抹于CPU
Appliquez la graisse thermique fournie
uniformément sur le CPU
Alinee los cuatro tornillos del disipador a
los agujeros de montaje de la placa base
クーラーのネジ4本をマザーボードの取り付け穴
に合わせます
Align cooler’s four screw feet to
motherboard mounting holes
Выровняйте четыре винта кулера по монтажным
отверстиям материнской платы
Die vier Schraubfüße des Kühlers an den
Montagelöchern des Motherboards
ausrichten
將散熱器的四角螺絲柱對準主機板孔位
Allineare i quattro piedini a vite del
dissipatore di calore ai fori di montaggio
della scheda madre
쿨러의 나사 피트 네 개를 메인보드 장착 구멍에
맞춥니다
将散热器的四角螺丝柱对准主板孔位
Alignez les quatre pieds filetés du
refroidisseur sur les trous de montage
de la carte mère
Fije el disipador a la placa base con un
espaciador entre la placa trasera de la
placa base y las tuercas hexagonales
スペーサーを挟んで、クーラーをマザーボードに
取り付け、裏側から六角ナットで固定します
Secure cooler onto the motherboard with
spacer between the backside of
motherboard and hex nuts
Закрепите кулер сиспользованием пластины
на задней стороне материнской платы
Kühler mit Abstandhalter zwischen
Rückseite des Motherboards und
Sechskantmuttern am Motherboard
befestigen
將墊片放置於主機板背面與六角螺帽中間，
鎖固散熱器於主機板
Fissare il dissipatore di calore sulla
scheda madre con un distanziatore tra la
parte posteriore della scheda madre e
i dadi esagonali
메인보드의 뒷면과 육각 너트 사이에 스페이서를
끼운 채 쿨러를 메인보드에 고정합니다
将垫片放置于主板背面与六角螺帽中间，
锁固散热器于主板
Fixez le refroidisseur sur la carte mère
avec un espaceur entre l'arrière de la carte
mère et les écrous hexagonaux
Instalación completa インストール完了
Installation complete Установка завершена
Damit ist die Installation abgeschlossen 安裝完成
Installazione completata 설치가 완료되었습니다
安装完成
Installation terminée
5
Conecte el cable de 4 pines desde el
ventilador del disipador al cabezal del
ventilador de CPU de la placa base
クーラーファンからの4ピンケーブルをマザーボ
ードのCPUファンヘッダに接続します
Connect 4pin cable form cooler’s fan to
motherboard’s CPU fan header
Подключите 4pin разъём вентилятора к
материнской плате
4-poliges Kabel vom Lüfter des Kühlers
mit der CPU-Lüfterstiftleiste des
Motherboards verbinden
將散熱器風扇的4pin線接上主機板的CPU風扇插槽
Collegare il cavo a 4 pin dalla ventola del
dissipatore di calore al connettore della
ventola CPU della scheda madre
4핀 케이블로 쿨러 팬을 메인보드 CPU 팬 헤더에
연결합니다
将散热器风扇的4pin线接上主板的CPU风扇插槽
Connectez le câble 4 broches du
ventilateur du refroidisseur à l'embase du
ventilateur du CPU de la carte mère
This product has a limited 1 year warranty in NorthAmerica and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone
authorized distributor.
散熱系統 有毒有害物质/元素及其化学含量表
部件名称
螺絲
風扇
支架(SPCC)
螺柱
鰭片
熱管
支架(SUS304)
墊圈
導熱膏
多溴二苯醚
(PBDE)
多溴联苯
(PBB)
六价铬
(Cr(VI))
镉
(Cd)
汞
(Hg)
铅
(Pb)
○
Χ
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
产品合格证
检验员：检01
生产日期：见产品条码
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11364-2014
标准规定的限量要求以下。
×：表示该有毒有害物质在该部件材料中的含量超出SJ/T11364-2014标准规定
的限量要求。
本表中有×的部件均符合欧盟RoHS法规，即欧盟第2011/65/EU号指令要求。