SitOnit Seating KICKSTAND User manual

SitOnit and Kickstand are trademarks or registered trademarks of Exemplis LLC. [phone] sitonit.net
KICKSTAND
USER GUIDE
Introducing a whole new way to work. There’s sitting. There’s standing. And now there’s
perching with Kickstand. It’s an active alternative that provides limitless opportunities for
body-benetting postures, giving you support you need to lean forward and focus on what’s
in front of you.
Lean into work.

SitOnit and Kickstand are trademarks or registered trademarks of Exemplis LLC. [phone] sitonit.net
KICKSTAND
SEAT
HANDLE
HEIGHT-ADJUSTMENT BUTTON
BASE
FEATURES AND BENEFITS
Ergo-sculpted, bolstered seat alleviates
pressure points while oering soft,
exible edges
Lightweight frame with easy-grip
handle means your new posture is
always within reach
Streamlined ambidextrous controls makes it
easy to adjust from either side
Stable base follows your slightest sways with
360 degrees of responsive movement

SitOnit and Kickstand are trademarks or registered trademarks of Exemplis LLC. [phone] sitonit.net
DO’S OF PERCHING
• Squarely position on the seat cushion.
• Form legs and the seat post into a triangle
shape under the user, opening up back-to-hip
angle to 130 degrees.
• Place feet rmly on the ground. The base
must be at on the oor at all times.
• Sit towards the back of the seat and not on
the seat edge.
• Bend knees slightly.
DON’TS OF PERCHING
• Don’t lean or tilt the stool back.
• Don’t remove pressure from your legs and
lean to the side or backward. You may lose
your balance and fall.
• Don’t point seat edge away from desk.
• Don’t sit on the seat edge.
USER INSTRUCTION
X X
KICKSTAND

SitOnit and Kickstand are trademarks or registered trademarks of Exemplis LLC. [phone] sitonit.net
MAINTENANCE
If found unstable due to loose bolts and screws, tighten them. Regular maintenance is recommended
for long product life. Make requests to our warranty department immediately when a repair or inspection
is needed.
USER INSTRUCTION
-Read all instructions before assembly or use at
www.sitonit.net/userguide
-Do not use if you have difficulty balancing as this
stool is designed to tilt & rotate
-Do not use if you are more than 250 lbs
-When using, keep both feet firmly on the ground
-Do not sit on edge of the seat or stand on stool
-Regularly inspect before using. Remove from
service if you see any damage or loose parts
FALL HAZARD
To minimize risk of serious injury:
KICKSTAND

SitOnit and Kickstand are trademarks or registered trademarks of Exemplis LLC. [phone] sitonit.net
STEP 2: ADJUST THE HEIGHT
Lean into or perch on top of the seat cushion
so you’re positioned towards the back of the
seat and not on the seat edge. Your legs and
the seat post should form a triangle shape under
the user, opening up with a back-to-hip angle
of approximately 130 degrees. Feet should stay
rmly on the ground or footrest at all times. The
base must be at on the oor at all times and
used on even and clean oor surfaces.
You can adjust the seat height using either the
left or right height adjustment button located
under the seat. Face the seat and push
your weight into the seat while engaging the
adjustment button will decrease the height, and
letting up on your weight while engaging the
adjustment buttons will increase the height. The
seat height adjusts from 23.5"–33.75".
STEP 3: ADJUST YOUR BODY
Once you’re squarely positioned on the entire
seat surface, bend your knees slightly; then,
shift your weight from side to side as needed.
This gives you the stability to stay upright, the
exibility to move to the left, right, forward and
back as you need.
STEP 1: POSITION
Position your seat in between the two lines (use
reference example image below).
Place your Kickstand stool about where you
would place a tall stool—close enough to the
table that you can reach things easily, but not so
close that the table is digging into your stomach.
KICKSTAND