SOLAC LV1301 User manual

MOD.
LV1301
Solac is a registered Trade Mark
STEAM CLEANER
INSTRUCTIONS FOR USE

3.
4.
8.
9.
10.
Fig. 4
Fig. 5
Fig. 1 Fig. 2 Fig. 3
14.
11.
(0)&(2)
5.
7.
6. 12.
13.
1.

ENGLISH EN
DESCRIPTION
1.- Main body of the appliance
2. Steam control
3. Safety cap.
4.- Accessory base
5.- Pilot light
ATTACHMENTS
6.- Measuring beaker
7. - Funnel
8.- Round brush
9.- Angle nozzle.
10.- Taper nozzle.
11.- Window-cleaning accessory
12.- Fabric accessory
13. Cloth
• If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
INSTRUCTIONS FOR USE
• Make sure that all products’ packaging has
been removed.
• Prepare the appliance according to the func-
tion you wish to use:
1.
water measuring beaker provided. Do not
add any substances to the water, including
chemicals, cologne, detergent or similar.
This can seriously damage your device and
void the warranty.
2. Do not use the appliance when the tank
is empty. If the appliance stops producing
steam, this means that the water tank is
empty.
3. Always check that the surfaces, objects
and fabrics to be treated are resistant
to or compatible with high-temperature
steam. We recommend that you check
the manufacturer’s instructions and that,
before using the equipment, perform a
test on a hidden part, or a sample, of the
surface to be treated.
4.
a container to remove any steam that may
have condensed inside the tube.
5. Do not tilt the steam cleaner/fabric steamer
cause boiling water to escape with the
steam.
6. Never direct the jet of steam at people,
animals or devices that have electrical
components.
7.
water tank.
8. To protect against the risk of electrical
shock, do not immerse the steam cleaner
/ fabric steamer in water or other liquids, or
handle it with wet hands.
9. Never tug on the power cord to disconnect
it from the power outlet. Hold the plug and
pull it out to disconnect it.
10.Disconnect the appliance when it is not in
use.
11.Do not operate the steam cleaner/fabric
steamer if the cable is damaged or if the
appliance has been dropped or is damaged
12.Touching the hot parts, the hot water or
the steam that the cleaner generates may
cause burns. Always be cautious when
there is hot water in the tank.
CLEANER
• Make sure that the appliance is unplugged.
•
•
Remember that the water should not go above
the mark on the beaker.
•
• Plug in the steam cleaner and wait for the pilot
light to go off, telling you that the appliance is
ready for use.
•
when the appliance is plugged into the wall
outlet.
USER INSTRUCTIONS
• Connect the required cleaning attachment and
plug in the appliance.
•
the appliance is plugged in.
• When the steam cleaner has the pressure re-
indicating that you can start to use it. This oper-
use, the warning light will go off and then come

EN
on, indicating that the steam cleaner is recov-
ering the necessary pressure.
• -
peatedly for short bursts rather than just a
few times for longer periods, so as to maintain
pressure in the reservoir.
•
-
nect the device from the mains, wait for it to
cool down to remove the attachments.
ATTACHMENTS
•
lining up the lugs on the taper nozzle with the
•
• If you want to reach inaccessible places or the
-
ible hose.
•
• Fit any of the accessories accompanying the
• -
dows, furniture, sofas, fabrics, and so on.
•
delicate surfaces as sofas and armchairs.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
• Unplug the appliance to the mains.
• Leave the appliance to cool down.
• Empty the water out of the boiler. Make sure
the appliance is completely depressurized be-
fore opening of the safety cap.
CLEANING
• Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
• Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
• Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
• Never submerge the appliance in water or any
other liquid or place it under running water.
TATIONS:
• For the appliance to work correctly it should be
kept free of limescale or magnesium incrusta-
tions caused by the use of hard water.
• Check that appliance has cooled down (wait
at least 3 hours after disconnecting the appli-
• Does not force open the safety cap; make sure
the appliance is completely depressurized pri-
or to opening.
• Fill the boiler with water and add the selected
anti-lime scale product.
• Leave the product to
• Shake vigorously and empty fully.
• If necessary repeat this procedure.