Spectrum 55241 User manual

Media Manager / Director installation
1. Remove the JC bolts from the audience side of the lectern with a 4mm hex wrench.
2. Remove the existing metal panel. This will no longer be needed.
3. Align and attach the new logo panel to the lectern with the removed JC bolts. Figure 1.
(1) 025039
4mm hex wrench
Figure 1
JC bolts
(6 required)
Media Manager V2
logo panel
Media Director V2
logo pane
l
JC bolts
(4 required)
0107055R1 Page 1 of 2
Assembly Instructions
Important
Before you begin, please make sure all parts and proper quantities
are included. Any parts damaged during shipment must be reported
within 15 days of receipt. To report information regarding damage, to
purchase parts or accessories, or if you have any questions, please
contact us at:
www.spectrumfurniture.com
715-723-6750, 800-235-1262
Thank you for purchasing Spectrum products!
Logo Panel
Tools
Required
55241 - Media Manager V2
55252 - Masters
55261 - Media Director V2
55248 - Doctorate
4mm hex
wrench
(included)
Doctorate Logo Panel
Masters Logo Panel
Media Director V2
Logo Panel
Media Manager V2
Logo Panel

Masters / Doctorate installation
1. Remove the JC bolts from the audience side of the lectern with a 4mm hex wrench.
2. Remove the existing laminate panel. This will no longer be needed.
3. Align and attach the new logo panel to the lectern with the removed JC bolts. Figure 2.
Figure 2
0107055R1 Page 2 of 2
925 First Avenue, PO Box 400, Chippewa Falls, WI 54729 Ph:800-235-1262, 715-723-6750 Fax: [phone]
E-mail: [email protected] web: www.spectrumfurniture.com
Tools
Required
4mm hex
wrench
(included)
JC bolts
(4 required)
Masters logo panel
Doctorate logo panel
JC bolts
(4 required)