Spectrum 55273 User manual

Flip-Up Shelf for
Flat Panel Monitor Cart V2
#55273
Assembly Instructions:
Tools Required:
Phillips screwdriver
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach Shelf Brackets
A. Determine which side of the cart the shelf is to be installed.
B. Align and attach each folding bracket to the side of the cart with (2) 8-32 x 1/2" PHM screws.
Do not tighten these screws completely.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
(4) 021587
8-32 x 1/2" PHM Screw (8) 026073 #8 x 3/4" PHSM Screw
Note:The Flip-up shelf and steel handle can be mounted on either
side of the unit, or both can be mounted on the same side.
0108926X Page 1 of 2
Flat Panel Monitor
Cart V2
Flip-Up Shelf for
Flat Panel Monitor Cart V2
#55273
Assembly Instructions:
Tools Required:
Phillips screwdriver
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach Shelf Brackets
A. Determine which side of the cart the shelf is to be installed.
B. Align and attach each folding bracket to the side of the cart with (2) 8-32 x 1/2" PHM screws.
Do not tighten these screws completely.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
(4) 021587
8-32 x 1/2" PHM Screw (8) 026073 #8 x 3/4" PHSM Screw
Folding Bracket
8-32 x 1/2"
PHM screws
Figure 1
Note:The Flip-up shelf and steel handle can be mounted on either
side of the unit, or both can be mounted on the same side.

A. Attach the shelf to the fully-extended folding brackets with
(8) #8 x 3/4" PHSM Screws. (4 per bracket.) Figure 2.
B. Tighten all screws securely
2. Attach Shelf
#8 x 3/4" PHSM
screws (8 req'd)
Shelf
0108926X Page 2 of 2
Shelf will automatically lock into place when lifted into the horizontal position.
* To flip-up or lower the shelf, release the levers under each folding bracket at
the same time while slowly raising or lowering the shelf.
Do not exceed a maximum of 150 lbs of weight on the shelf.
Do not move the cart while the shelf is in the upright position.
A. Attach the shelf to the fully-extended folding brackets with
(8) #8 x 3/4" PHSM Screws. (4 per bracket.) Figure 2.
B. Tighten all screws securely
Figure 2
2. Attach Shelf
#8 x 3/4" PHSM
screws (8 req'd)
Shelf
CAUTION:
Be careful not to pinch fingers while lowering!
3. Operation
0108926X
Page
2
of
2