Sprout SOSTA BED HEADBOARD User manual

1.2” Hex Screw 1.6” Hex Screw
CD
Bracket
B
Headboard/Footboard
A
HEADBOARD / FOOTBOARD
SOSTA BED
ASSEMBLY GUIDE
(4x)
(2x)
(2x)
PARTS
OPTIONAL
Power
Drill
INCLUDED TOOLS
Hex
Bit
4mm Hex
Wrench

OPTIONAL: A rubber mallet can
help push pieces together.
A hammer can also be used with
a scrap piece of wood or a
cutting board placed over the
surface being hammered for
protection.
Enjoy the best assembly experience
sprout-kids.com/headboard
ASSEMBLY VIDEO
Place Bracket rmly into groove. Repeat for both sides of the
Headboard/Footboard .
With groove opening face up, set Headboard/Footboard on ground
as shown.
A
A
A
B
B
B
1
2
A
B
3If using a drill, set clutch on drill to LOW SETTING (around 3).
If your drill has two speeds, set it to the SLOW SPEED (1).
A high clutch setting will strip screw heads and render parts useless!
CLUTCH TOO HIGH: If the drill twists dramatically in your hand when
drilling. Lower the clutch setting.
CLUTCH TOO LOW: If the screw does not screw in all the way. Adjust
clutch up by 1 setting and try again.
3
4
2
2
3
3
4
2
1
12
12

Flip Headboard/Footboard upright and insert Bracket ends rmly
into bed frame slots (using a rubber mallet if necessary). Ensure
Headboard/Footboard is ush against bedframe before proceeding.
Insert (2x) 1.2” Hex Screws as shown to secure Bracket . Repeat for
both Brackets .
B
B
B
4
5
C
A
A
B
A
B
C
C
C
B
B
C
1.2” Hex Screw Actual Size.
Place screw on paper to verify
correct size.

Insert 1.6” Hex Screw to secure Headboard/Footboard to bed frame.
Repeat for each side.
6
For Safety Regulations and Standards:
sprout-kids.com/sosta/safety
7
D
D
D
A
1.6” Hex Screw Actual Size.
Place screw on paper to verify
correct size.
WWW.SPROUT-KIDS.COM
PO BOX 1123, PROVO, UT 84601
QUARK ENTERPRISES 2022
DOCUMENT: AI-SBT-Headboard
If you have questions, reach out to [email protected]