Steelcase Pachinko Two Chair User manual

Page 1 of 15
939504676 Rev B
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2003 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Pachinko Two Chair - Assembling Column Cover,
Dismantling Chair & Reassembling Product

Page 2 of 15
939504676 Rev B
Installing chair with base cover
onto column:
1. Drop base foot over column.
2. Attach base top to chair slide.
Assembling Column Cover
BASE FOOT
COLUMN
1
2

Page 3 of 15
939504676 Rev B
3. Snap base cover onto base top. Engage
all (4) tabs.
4. Drop chair with base cover over column
and onto chair control taper making sure
chair is properly engaged onto tapered
column.
3
4

Page 4 of 15
939504676 Rev B
Removing chair with base cover and
replacing seat and back cushion
assembly and/or outer shells:
1. Remove screw from outer back shell.
2. Pull back bottom of outer back shell.
Dismantling Chair - 1 through 11
1
2

Page 5 of 15
939504676 Rev B
3. Remove two springs on chair slide.
4. Remove two screws on chair slide.
3
4

Page 6 of 15
939504676 Rev B
5. Slide chair forward to separate the upper
and lower half of the chair slide.

Page 7 of 15
939504676 Rev B
6. Using pry tool, pry outer back shell off
of inner back (four places).

Page 8 of 15
939504676 Rev B
7. Remove all old push on metal fasteners
from the inner back and/or the outer back
shell (four places).

Page 9 of 15
939504676 Rev B
8. Remove back cushion assembly from
chair control (four screws).
9. Remove outer seat shell (five screws).
8
9

Page 10 of 15
939504676 Rev B
10. Remove seat cushion assembly from
chair control (four screws).
11. Remove plastic upright cover from
seat cushion assembly (two screws).
10
11

Page 11 of 15
939504676 Rev B
Build Up:
12. Position upright cover onto seat cushion
assembly by gauging the upright cover against
the two locating bosses on the moldwood inner
seat and screw down with two screws.
13. Position seat cushion assembly onto chair
control and screw in place with four screws.
Reassembling Product
12
13

Page 12 of 15
939504676 Rev B
14. Push on four new push on metal fasteners
onto back cushion assembly inner.
15. Slide back cushion assembly onto chair
control upright making sure upright cover is
positioned between the back cushion assembly
and upright. Secure with four screws.
14
15

Page 13 of 15
939504676 Rev B
16. Position outer seat shell by aligning the
two screws that hold the seat bracket to the
seat cushion assembly with the clearance
holes in the outer seat shell. Screw down with
five screws.
17. Position outer back shell over push on
metal fasteners on back cushion assembly
and push on the outer back shell, engage all
four locations.
16
17

Page 14 of 15
939504676 Rev B
18. Pull back outer back shell at the bottom
and slide chair slide upper onto lower slide.
19. Install two slide screws.
18
19

Page 15 of 15
939504676 Rev B
20. Install two slide springs.
21. Push in on bottom of outer back shell
and install screw, screwing into hole in chair
control upright.
20
21