Steelcase FE-3 User manual

Page 1 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen Bracket + Bench
1. Slides out all the desktops and open
up space in the middle of the Bench
for Screen Bracket installation.
2. Install Bracket and Washer Plate to
Bench connector by M6 Bolts.
1
2
Washer Plate
Bolt
Bracket

Page 2 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen Bracket + Bench
3A. Place Screen End Block to the side frame.
3B. Align to the middle hole at the side frame.
3C. Screw tapping screw to tighten it.
Tapping Screw
Screen End Block
Side Leg
Connector

Page 3 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen Bracket + Bench
4. Secure the Screen End Block to the
connector from the bottom by using M6 bolts.
5. Repeat Step 2 to 4 for the other Screen End
Block at another end of the Bench.
4
5

Page 4 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen Bracket + Bench
6. Repeat Step 2 at both connectors at
the middle of the bench.
7. Place the Screen Middle Block on
both middle connectors and align
holes to the brackets.
6
7
Screen Middle Block

Page 5 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen Bracket + Bench
8. Secure the Screen Middle Block by
using four M6 bolts from the bottom.

Page 6 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen + Bench
9. Align Screen Axle and slot FE-3 Screen to
the Screen Blocks.
10. Secure FE-3 Screen by countersunk screws
both ends.
9
10

Page 7 of 7
FRAME ONE BENCH
Assembly Instruction - FE-3 Screen and Bracket for Bench
®
September 2008
FE-3 Screen + Bench
11. Secure FE-3 Screen to Middle Screen Block
by M6 bolts.
12. Slide back all the desktops and lock them.
11
12