Steelcase CHEVRON User manual

CHEVRON Tables
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©2015 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
®
Page 1 of 9
19079601 Rev B
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on top of the
worksurface after the install.
3. Feet must hang 1“ past the rear edge of the
worksurface - except corner foot.
13” FOOT
BOTTOM VIEW SHOWN
13” FOOT
21” FOOT
55
5
13
24
4
24
13 13
15
21
80
60
1
1
12
5
13

Page 2 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on
top of the worksurface after the install.
3. Feet must hang 1“ past the rear edge of
the worksurface - except corner foot.
13” FOOT
13” FOOT
21” FOOT
5
55
13
24
4
24
13 11
11
13
58
58
1
1
12
5
21
BOTTOM VIEW SHOWN

Page 3 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on
top of the worksurface after the install.
3. Feet must hang 1“ past the rear edge of
the worksurface - except corner foot.
13” FOOT
13” FOOT
21” FOOT
5
55
13
24
4
24
13 13
13
13
60
60
1
1
12
5
21
BOTTOM VIEW SHOWN

Page 4 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on top
of the worksurface after the install.
3. Feet must hang 1“ past the rear edge of the
worksurface - except corner foot.
13” FOOT
BOTTOM VIEW SHOWN
13” FOOT
21” FOOT
5
55
13
24
4
24
13
13
15
21
80
60
112
5
13
1

Page 5 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on top
of the worksurface after the install.
3. Feet must hang 1“ past the rear edge of the
worksurface - except corner foot.
13” FOOT
BOTTOM VIEW SHOWN
13” FOOT
21” FOOT
55
5
13
30
4
24
13 13
13
21
90
70
1
11
5
18
1

Page 6 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left
on top of the worksurface after the install.
3. Feet must hang 1“ past the rear edge
of the worksurface - except corner foot.
13” FOOT
BOTTOM VIEW SHOWN
13” FOOT
21” FOOT
5
55
13
30
4
24
13
13
13
21
90
70
118
5
11
1

Page 7 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on top of the
worksurface after the install.
3. Feet must hang 1“ past the rear edge
of the worksurface - except corner foot.
BOTTOM VIEW SHOWN
27” FOOT
27” FOOT
8
16
3
29
45
27
1
144

Page 8 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on top of the
worksurface after the install.
3. Feet must hang 1“ past the rear edge of the
worksurface - except corner foot.
BOTTOM VIEW SHOWN
27” FOOT
27” FOOT
8
16
3
29
60
27
1
1412

Page 9 of 9
19079601 Rev B
®
NOTES:
1. CHEVRON project team to specify the best default
position for the short foot. As a guide line, where the
sit-to-stand table will be adjacent to the entrance to the
workstation / office, the short foot should be located
nearest the entrance to minimize the tripping hazard.
2. The user instructions needs to be left on top of the
worksurface after the install.
3. Feet must hang 1“ past the rear edge of the
worksurface - except corner foot.
BOTTOM VIEW SHOWN
27” FOOT
27” FOOT
8
16
3
29
70
27
1
111
11