STI UB-1TF User manual

NoTouch®
Technology
UB-1TF Universal
Touch Free Button
We protect the things that protect you.®

NOTES
It is important to read, understand and follow all instructions provided with
this product. It is the installer’s responsibility to comply with NFPA 70 &
101, NEC, mounting specifications according to ADA and other applicable
electrical codes. To avoid electrical shock, DO NOT attempt to install
this product when power is on. ADA mounting compliance requires the
operable part of the initiating device shall not be less than 3 1/2 ft. (1.1m ) or
greater than 4 1/2 ft. (1.37m) above finished floor surface. After installation
and testing are complete, provide a copy of this manual to all personnel
responsible for testing and maintenance of this product.
POWER
Switch:
Input: 12 VDC ± 15%
Standby Power: 15 mA
Active: 25 mA
Operating temperature:
-4° to 158°F (-20° to 70°C)
Message LED:
12-24 VDC
Form “C” contact rating:
30 VDC, 1A
- 2 -
4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/N UB-11. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green

1. TO CHANGE BUTTON COLOR AND ROUND MESSAGE
1. Choose button color. If same as existing, proceed to 2.
2. a. Loosen nut on back of switch, and push switch through plate far
enough to grasp button from back edge and remove button lens.
b. Push switch back into plate and tighten nut. Be careful not to over-
tighten.
3. Select color lens. Align notches on button with tabs on switch and push until it
snaps together.
1. Remove LED circuit board.
2. Remove current message by pushing in and
down on tabs 1 and 2 with a small screwdriver.
If necessary, also push in and down on tabs 3
and 4. Once message is loose, remove from the
front of the plate.
3. Select new message and snap into place.
Blank plates are included to create your own
custom message.
2. CHANGE TOP MESSAGE
(Refer to notes on pg. 2 for “EMERGENCY”
message use.
- 3 -
4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/N UB-11. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/N UB-11. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/N UB-11. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green

4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/N UB-11. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
Wire Color Code with power applied:
Red: +12 VDC
Black: -12 VDC
Green: N.C.
Blue: COM
White: N.O.
3. ATTACH WIRE PLUG
- 4 -
4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/N UB-11. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green

GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
4. ATTACH POWER FOR MESSAGE LED (if desired)
WIRING DIAGRAMS (Color codes are shown with power applied and button LED red during
wiring)
A. Normally Open Exit Device
B. Normally Closed Exit Device
UB-1TF Wire Color Code
CONNECTOR POWER OFF POWER ON POWER ON
WIRE COLOR (SUPERVISORY) UNTRIGGERED TRIGGERED
RED +12V +12V +12V
BLACK -12V -12V -12V
GREEN N.O. N.C. N.O.
BLUE COM COM COM
WHITE N.C. N.O. N.C.
LED color None Red Green
- 5 -

5. MOUNT BUTTON ONTO ELECTRICAL BOX
- 6 -
4.80 in.
(122mm)
3.22 in.(82mm)
6.31 in.(160mm)
.75 in.
(19mm)
.77 in.
(20mm)
4.80 in.
(122mm)
3.22 in.(82mm)
6.25 in.(159mm)
.75 in.
(19mm)
.77 in.
(20mm)
POWER IN
12-30 VDC/VAC
œ +
A
COLOR CODE:
RED
BLACK
GREEN
BLUE
WHITE
+12 VDC
-12 VDC
N.O.
COM
N.C.
INSERT PLUG INTO SWITCH WITH
RIBS IN THIS DIRECTION
DETAIL A
POWER IN
12-30 VDC/VAC
œ +
NC
COM
NO
MAG LOCK
UB-1L LED PCB
UL Listed
NORMAL POSITION BUTTON ACTIVATED
MAGNETIC LOCK
BUTTON LAMP
MESSAGE LAMP
ON
GREEN
OFF
OFF
RED
ON
+
+
+
UB-1L LED PCB
NYLON WASHER
SELF TAPPING SCREW
12
34
SCREWDRIVER
Power In
12œ30 VDC/VAC
Safety Tech. Int·lInc.
P/NUB-1 1. Ver 1.0
wwyy
DIFFUSER
ALIGN TABS
TO NOTCHES
ON BUTTON
LENS
SWITCH NUT
DIFFUSER
MESSAGE LENS
BUTTON LENS
CONTACT LATCH TIME ADJUSTMENT:
CLOCKWISE - LONG
COUNTERCLOCKWISE - SHORT
RANGE: ~0.5 ~ 60 sec.
ACTIVATION RANGE ADJUSTMENT:
CLOCKWISE - CLOSE
COUNTERCLOCKWISE - FAR
RANGE: ~0.4 ~ 4 INCHES
~1 ~ 10 CM
12-24VDC Power Supply
19085 #6 - 32 x 1 in. OVAL
HEAD MACHINE SCREW
(2) PROVIDED
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED red
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
GREEN
BLUE
WHITE
BLACK
RED
N.C.
COM
+12VDC
GND
N.O.
EXIT
DEVICE
INPUT
UB-1TF LED
Message lit with button LED green
6. CUSTOM LABELS
To create your own custom label, size to fit in .48h x 2.23w as shown below.
Also available online at: www.sti-usa.com/ublabel
2.23 in.
.48 in.

- 7 -
COLOR MATCH BACKBOX KIT
CUSTOM LABEL APPLIED TO BLANK
MESSAGE PLATES
24 VOLT LED
WHITE (STANDARD)
RED
BLUE
GREEN
12 VOLT LED
RED
BLUE
GREEN
COVERS
BOPPER STOPPER
UNIVERSAL STOPPER
STOPPER II
SUB-71100A-COLOR
(red, blue, green, white or yellow)
UB-1CL-COLOR
(blue, green, white or yellow)
KIT-E10147
KIT-E10145
KIT-E10141
KIT-E10143
KIT-E10144
KIT-E10140
KIT-E10142
STI-6518
STI-13000 Series
STI-1100 Series
ACCESSORIES
DESCRIPTION PART #
See website for complete cover details

Inst. Sht. UB-1TF Button JUN2018
2306 Airport Rd • Waterford, MI 48327
Phone: [phone] • Fax: [phone]
[email protected] • www.sti-usa.com
Taylor House • 34 Sherwood Road • Bromsgrove
Worcestershire • B60 3DR • England
Tel: [phone] • Fax: [phone]
E-mail: [email protected] • Web: www.sti-emea.com
Three year guarantee against breakage of polycarbonate in normal use (one year on
electro mechanical and electronic components).
Electronic warranty form at www.sti-usa.com/wc14.
WARRANTY
USA - Headquarters