Stinger HEIGH 10 User manual

Copyright © 2022
StingerElectronics-EU.com
INTEGRATED INFOTAINMENT TOUCH SCREEN SOLUTION FOR
ALFA ROMEO GIULETTA 2014 - 2021
PART NUMBER: UN1810E-AR1
INSTALLATION GUIDE

2
www.sngerelectronics-eu.com
ABOUT THIS PRODUCT
Upgrade your Alfa Romeo’s radio with the HEIGH10® 10-inch infotainment system. Retain all OEM features, vehicle sengs, and more. All in one easy to install, plug-and-
play package.
The HEIGH10® is designed to enhance screen size and infotainment features for drivers which include Apple CarPlay, Android Auto, DAB+, and Bluetooth streaming.
Paired with the vehicle retenon interface, key vehicle sengs will be retained and controlled through the HEIGH10® display by your steering wheel controls.
The components of this kit are compable for the Alfa Romeo Giuliea (940 Faceli) 2014-2021, with non-amplied Connental Mopar factory head units.
will not
CONTENTS
• HEIGH10® unit with ng accessories and wiring
• Piano black double DIN fascia plate (with accessories)
• Vehicle retenon interface with plug-and-play harness
• Vehicle specic antenna adapter
• USB retenon lead
• Snger stereo patch lead
• Instrucon manual

3
www.sngerelectronics-eu.com
FITTING GUIDE
1. Open the glovebox and you will nd a circular piece of plasc in the rim, pop this out of place and it will reveal a screw that holds one secon of the fascia in
place.
STEREO REMOVAL
4. Undo 4x bolts that hold the radio in place and remove whilst disconnecng all of the wiring.
DASH MODIFICATION
Some plascs will need to be cut and removed from the dashboard to make space for the new car stereo.
Measure where the stereo will sit and take due care when modifying the vehicle. We promote the help of professional installers. We will not be held responsible for any damage to
the vehicle.
3. Once free, use a panel removal tool to pry the main fascia panel o the dashboard, disconnecng the wiring in the process.
2. Proceed to then remove all the visible screws located within the lip of the glovebox that hold the main fascia panel in place.
HEIGH10 ASSEMBLY
Take the HEIGH10® components and begin to assemble the core components in accordance with the “Installaon Manual” that comes with unit.

4
www.sngerelectronics-eu.com
FITTING GUIDE


1. With the HEIGH10® unit congured correctly, aach the fascia brackets to the relevant sides of the radio module using the screws within the kit. Place into the
vehicle and roughly test t with the fascia to measure whether the brackets need moving forwards/backwards.
2. With the brackets aligned correctly, aach the fascia to the brackets over the top of the unit using the screws that come within in the kit.
3. Once all of the steps in ‘Stereo Installaon’ are complete, place the assembly into the dashboard and screw down using the pre-exisng screws. Then reas-
semble the main fascia panel.
5. Aach the antenna adapter to the vehicles pre-exisng connecon and the back of new HEIGH10® unit.
2. Take the 14-way connector on the vehicle interface harness and plug this into the relevant connecon on the side of the interface.
3. Take the 12-way connector of the stereo patch lead and plug this into the relevant connecon on the side of the interface. Then take the 3.5mm jack and
aach this to the HEIGH10® unit.
4. Aach the 4-way camera extension harness to the interface.
6. Aach the USB retenon lead in between the vehicle pre-exisng USB connector and the HEIGH10® unit.
7. Connect the male yellow RCA to the ‘reverse camera input’ on the back of the new stereo.
1. Take the interface and set the dipswitches accordingly (note that these are default to o):
ON (DOWN) OFF (UP)
DIPSWITCH 1 Pioneer head units All other head units 
DIPSWITCH 2 Reverse Camera PAL Reverse Camera NTSC 
DIPSWITCH 3 Reset factory sengs (switch) Reset factory sengs 
DIPSWITCH 4 Not Used Not Used
9. Aach the addional wiring on the harness to the back of the stereo:
- Speed Pulse  - Park Brake  - Reverse
10. When all the above wires (and any addional accessories) have been connected, nally make the power connecons between the stereo and the vehicles
pre-exisng connector.
For a full connecon breakdown of the HEIGH10® unit, see the “Installaon Manual” that comes with the unit.
8. Connect the aermarket reverse camera (if required) to the female yellow RCA on the camera extension harness.
Note: ensure the ‘Camera Connected’ opon in the ‘Preferences’ menu is set to ‘Yes’ for the camera to funcon correctly.

5
www.sngerelectronics-eu.com
Please note: conguraon layout may dier dependent on vehicle model.
STEERING WHEEL CONTROL FUNCTIONALITY
1
2
3
4
5
68
7
1. Mute
2. Source 
3. Volume +
4. Volume -
5. Track +
6. Track -
7. Pick Up
8. Hang Up
1. Mute
2. Speech
3. Volume +
4. Volume -
5. Up Arrow
6. Down Arrow
7. Pick Up
8. Hang Up
 
- Short press SPEECH  to enter a sub-menu or conrm an opon within a menu.
- Press TRACK + to scroll up through the menu items, or to increment an opon within a menu.
- Press TRACK - to scroll down through the menu item, or to decrement an opon within a menu.

CONFIGURATION MENU FUNCTIONALITY
Press and hold SPEECH to enter into the conguraon menu.
From here you will then be able to use the steering wheel controls to navigate
through the various opons and sengs below.
Conguration Menu
Vehicle Settings
Infodapter Settings
Language
Version
< Back

6
www.sngerelectronics-eu.com
CONFIGURATION MENU FUNCTIONALITY
VEHICLE SETTINGS
This interface retains the ability to adjust selected vehicle sengs* on the new stereo
that were present when the original head unit was installed.
The opons available will depend on the individual vehicle and system specicaon.
These might include lights, locks, mirrors, me & date and much more.
*See the vehicle handbook for more informaon regarding these features and how they operate.
INFODAPTER SETTINGS
These sengs allows you to edit the layout/look of the menu screens. These opons
include:

Change the horizontal and vercal screen size/posion to align on the new stereo
display.

Adjust the brightness, contrast and colour saturaon.

Change opons based on vehicle funconality and
specicaon.

This sub-menu (found within the Infodapter Menu) allows you to adjust various details
specic to the vehicle. These include:

Select according to the colour conguraon of the park assist ed to the vehicle.

Select ‘Yes’ if an oponal aermarket reverse camera is connected.

Select whether camera or park assist image is shown by default when reversing. The driver can select the desired image by pressing the ‘Source’ buon (g. )
while reversing.
(Note: this opon is only available when Camera Connected is set to ‘Yes’)
Vehicle Settings
Display
Clock
Safety and Driving Assistance
Lights
Doors and Locks
< Back
Infodapter Settings
Screen Size/Position
Picture Settings
Preferences
< Back
Preferences
Park Assist Version 0
Camera Connected Yes
Reverse Priority Park Assist
Park Brake Source Speed
Restore factory settings
< Back

Set Park Brake output to acvate when park brake is on (Park), when speed is less than 3km/h (Speed) or to remain on at all mes (Always On)

Restores all Infodapter sengs to factory defaults. Note: this does not restore vehicle sengs to defaults.

7
www.sngerelectronics-eu.com
WIRING DIAGRAM
ISO Connector
Connect to new stereo
OEM Specific Connector
Connect to relevant connector from vehicle
Stereo Connection (Patch) Lead Connector [12 Pin]
Connect to Interface Box
Note: Must be connected first, before power
connection is made to the interface
Main Wiring Loom Connector [14 Pin]
Connect to Interface Box
Flying Wire Outputs
Pink - Speed Pulse
Green - Park Brake
Purple/White - Reverse Gear
Male Yellow RCA Connector
Connect to aftermarket radio
camera input
Female Yellow RCA Connector
Connect reversing camera
(optional)
Camera Harness
Connector [4 Pin]
Connect to Interface Box

8
www.sngerelectronics-eu.com
For further help or assistance, please contact and ll out a support cket with full details of your issue via:uk[email protected]om
For general enquires, contact us at:
Phone: [phone]
E-Mail: 
Mon - Fri 9am - 5.30pm GMT
TECHNICAL ASSISTANCE
If you would like to download a digital copy of this manual, or any other product, then please visit the www.SngerElectronics-EU.com website.
This manual is considered correct at the me of prinng but is subject to change. For the latest manuals & updates, refer to our website.
Copyright 2022 by Snger.
AGREEMENT: End user agrees to use this product in compliance with the instrucons and terms of use and with all laws. STINGER provides instrucons and safety
warnings with respect to this product and disclaims all liability for any use not in conjuncon with those instrucons or other misuse of its product. If you do not agree,
please disconnue use and contact STINGER. This product is intended for o-road use and passenger use only.