Stinger HEIGH10 SRK-RAM13H User manual

®
PN: UN1810
USER GUIDE
INTEGRATED MULTIMEDIA DISPLAY
FOR RAM TRUCKS
SRK-RAM13H
®
®

23
StingerElectronics.com StingerElectronics.com
®®
AM/FM Radio............................18
BluetoothPhone.......................19
Pairing a Device...................20
BT Device Settings...................21
Contacts/Call Log..................22
Bluetooth Music........................23
SiriusXM
®
. ................................... 24
SiriusXM Replay™...................27
SiriusXM Lock Code................28
USB Media.................................29
Apple CarPlay
®
.........................30
Android Auto™ ........................31
iPod................................. . .........32
HDMI................... ................... ....33
AV In..........................................33
Cameras...................................34
Navigation................................35
Display Off........... ................. ...35
The Controls................................4
Getting Started...........................6
Selecting a Source.....................7
Setting the Clock........................7
Setting the Tabs..........................8
Audio Settings.........................40
Equalizer.................................41
Factory EQ.............................41
Crossover...............................42
Time Correction....................43
Toslink.....................................44
Gain/Volume........................44
WELCOME TO YOUR NEW
Enjoy the ride
THE BASICS THE SOURCES GENERAL SETTINGS TECH SPECS
AUDIO SETTINGS
VEHICLE SPECIFIC
Climate Control..........................9
Vehicle Info..............................10
Gauges...................................11
Performance..........................12
UserSettings............................13
Vehicle Settings............. ... ........14
Camera(s)...............................15
Media Hub...............................17
Settings......................................36
Clock.......................................36
System Settings.......................36
Illumination.............................37
Backgrounds...........................38
Display.....................................38
Tabs.........................................38
Cameras.................................39
Reset Button............................45
Troubleshooting......................46
Specications.
........................ 48
Technical Support...................49
®

45
StingerElectronics.com StingerElectronics.com
®®
THE CONTROLS
Multifunction Knob
Press & hold to Power On/Off
Turn to adjust Volume Up/Down
Press to Mute/Unmute
Home Button
Access the Home Menu
Press & hold for Navigation
Tune/Track Up Button
Media control: Next, Forward, Seek
Press & hold function for select sources
Tune/Track Down Button
Media control: Previous, Back, Seek
Press & hold function for select sources
CONTROL USING THE FACTORY CONTROLS
Mute/Unmute
Screen Off Back / Previous
Tune Up/Down
Volume Up/Down
Voice Button
Launches Voice Control

67
StingerElectronics.com StingerElectronics.com
®®
GETTING STARTED SELECTING A SOURCE
Back Arrow Exit
POWER UP!
With the vehicle ignition in the ON or
ACC position, Press and hold the knob
for 2 seconds to power ON/OFF.
The source will automatically default to
the last source used prior to powering
down.
You can adjust the audio volume at
start-up in Sound Settings on page 44.
The Information Bar is located at the
top of the screen. Depending on the
SOURCE, it will provide information
or content-sensitive controls. It also
displays temperature, time, phone
info and may contain BACK ARROW
and EXIT buttons.
Customizable TABS can be accessed by
swiping the up arrow at the bottom
of the screen. Tabs give direct access to
sources/settings and can be customized
as shown on Page 8.
The active Tab will be highlighted, and
sources that are not available will be
dimmed out. Once the Tabs are opened,
they will auto-close after 5 seconds, or
press the down arrow to close the tabs.
There are multiple ways to scroll...
Swiping Up/Down, Up/Down Arrows
SETTING THE TIME
1) Touch and hold the Time Display
on the Information Bar for 2 seconds
to access the clock settings.
2) Swipe or click the arrows to set
time and format.
3) Touch the BACK ARROW or EXIT
to save and exit.
2
1
To select a source, press the HOME
button.
The HOME MENU displays all Sources,
along with Settings, Audio, Camera
and Vehicle options.
SOURCES that are not currently
available are dimmed out.


QUICK TIP
Information Bar Source/Info
Temperature/
Time
Power
ON/OFF
Swipe Up
To Open TABS
HOME
Button
3

89
StingerElectronics.com StingerElectronics.com
®®
The Tabs can be congured to provide quick access to your favorite sources
or settings. The steps below show changing Favorites to Climate. Vehicle Info is
another option to consider adding to the Tabs.
CUSTOMIZING THE TABS CLIMATE CONTROL
HOME BUTTON > SETTINGS > TABS HOME BUTTON > CLIMATE
To Program a Tab:
1) Press the HOME button and select SETTINGS
2) From the SETTINGS menu, select TABS [1]
3) Select a Tab postition (1–7) on the
bottom row. [2]
4) Select the desired source or setting
from the options on the top rows. [3]
Now Favorites in position 2 is replaced
with Climate. Continue customizing or
touch EXIT (X) to return to current source
or the BACK arrow to return to SETTINGS.
1
3
2
BACK EXIT
If your RAM is equipped with Automatic Climate Controls, you can view and adjust the
climate control settings from the touchscreen display as well as operate the heated/
cooled seats and heated steering wheel, if equipped. The factory climate controls
located below the display continues to function, and any changes made with the
factory controls are reected on the screen.
All climate control functions are explained in your RAM Owner's Manual if you need
more information.
Selecting Climate Settings will allow you to personalize the climate display by entering
the temperature values that indicate hot, cold and in between. The settings shown
above will display Blue Airow up to 65°, and White Airow from 66°-69°and Red
Airow from 70° and up. If no White Airow is preferred, set the temperatures 1°apart
and the display will switch from Blue to Red only.
Current settings will be highlighted. You can change the
highlight color in HOME > Settings > Illumination on Page 37.