Sunjoy L-GZ916PST-D User manual

Item #1001 025 205
Model #L-GZ916PST-D
USE AND CARE GUIDE
L-GZ916PST-D
TIERNEY GAZEBO
Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase.
Our clear, easy o follow, step by step instructions will guide you through the project from start to finish.
Please do not return this product to the store. For technical assistance or replacement parts,
please call Sunjoy Group at 1 [phone] anytime.
You may fax your replacement parts form (which is included in the packaging)to 1 [phone]
or email to
[email protected]
Production Number：20184434

2
Table of Contents
Table of Contents..........................................................2
Safety Information.........................................................2
Warranty.........................................................................2
What is Covered .......................................................................2
What is Not Covered ................................................................2
Pre-Assembly ................................................................ 3
Planning assembly...................................................................3
Hardware Included...................................................................3
Package Contents ................................................................ 4-5
Assembly ....................................................................6-8
Care and Cleaning ........................................................ 9
Safety Information
1. More than four people are required for this assembly.
2. Some parts may contain sharp edges. Wear protective
gloves.
3. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of
personal injury and damage to equipment. Please read all
instructions before assembly and usage.
DANGER: This unit is heavy! Do not assemble this item
alone.
WARNING: Do not leave the gazebo where there is a risk
of high wind, as possible damage will occur to the
structure.
WARNING: Keep all flame and heat sources away from
this gazebo fabric. This Gazebo is made with fabric that
meets CPAI-84 specifications for flame resistance. It is not
fire proof. The fabric will burn if left in continuous contact
with any flame source. The application of any foreign
substance to the gazebo fabric may render the
flame-resistant properties ineffective.
Warranty
1 YEAR WARRANTY
WHAT IS COVERED
This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the
item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or
workmanship for a period of 1 years.
WHAT IS NOT COVERED
We do not reimburse for transportation of delivery costs, or compensate the individual or any outside party for assembling or disassembling
the product.
CAUTION: Do not climb on top of the gazebo. Falling off
the gazebo can result in serious injury, possibly even death.
NOTICE: For outdoor use only.

3
Pre-Assembly
PLANNING ASSEMBLY
Before beginning assembly of this product, make sure all parts are present. Compare parts with the Hardware Included
and Package Contents lists. If any part is missing or damaged, do not attempt to assemble the product. Contact
customer service for replacement parts.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB CC DD ZZ
EE FF GG
Part Description Quantity ADD
AA H02015C11 M6X15 Bolt 24 3
BB H19001C11 M6 Washer 72 8
CC H02020C11 M6X20 Bolt 24 3
DD H14001C11 M6 Nut 16 2
EE H02040C11 M6X40 Bolt 8 1
FF P12401A01001 Stake φ8*180 16 0
GG P90701A07001 Ring 96 10
ZZ H00001C12 M6 Wrench 2 0

4
Pre-Assembly (continued)
PACKAGE CONTENTS
\
E
A
B1
B2
C
G
P
R
S
U
V
H
J
F
L
K
T
Q
M
N

5
Pre-Assembly (continued)
Part Description Quantity
A P11109A01106 Post 4
B1 P11019A01106 Long screen 4
B2 P11020A01106 Short screen 4
C P10803A01106 Connector of middle bottom beam 4
E P10208A01106 Cant beam 4
F P10409A01106 Middle beam 4
G P10207A01106 Cant beam bottom tube 4
H P10410A01106 Middle beam bottom tube 4
J P10113A01106 Connector for the large top 1
K P10206A01106 Cant beam of small top 4
L P10112A01106 Connector of the small top 1
M P11606A01106 Stake plate 4
N P11506A01106 Stake cover 4
P P11807A01106 Cant Support 4
Q P12601A01106 Hook 1
R P00103A07001 Small canopy 1
S P00104A07001 Middle canopy 1
T P00105A07001 Large canopy 1
U P00202A06007 Curtain 1
V P00302A02901 Netting 1

6
Assembly
1
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
2
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
 Set stake cover (N) into the post (A), then installed stake plate
(M) on the bottom post (A) by using bolts (AA), washer (BB).
 Insert the long screen end (B1) into the short screen (B2), fasten
by using Bolt ((CC), washer (BB) and Nut (DD).
3
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
4
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
 Fix the mid beam connector(C) on the long screen (B1) and short
screen (B2), by using Bolt (AA) and washer (BB).
 Attached the long / short screen (B1/B2) on the post (A) by using
bolt (CC) and washer (BB).

7
Assembly (continued)
5
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
6
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
 Attached the cant support (P) to the long and short screen
(B1/B2), by using bolt (CC) and washer (BB).
 Insert cant beam end (E) into Cant beam bottom tube (G), then insert
the cant beam other end (E) into big top connector (J), attached the
cant beam bottom tube(G) to the Post (A) by using bolts (EE), washer
(BB) and nut (DD)；
7
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
8
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
 Insert the Mid beam end (F) into the mid beam bottom tube (H),
then insert the mid beam other end (F) into big top connector
(J), install the mid beam bottom tube (H) to mid beam
connector(C) by using bolt (EE), washer (BB) and nut (DD).
 Insert the small top cant beam (K) into the small top connector
(L)，spread the big canopy(T) on big top，the spread the middle
canopy (S) on middle top，don’t spread completely，then insert
the small top cant beam(K) into cant beam (E) and attach the
hook (Q) to the big top connector (J).

8
Assembly (continued)
9
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
10
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Fix the small canopy (R) to the small top cant beam
(K), then fix the middle canopy corner (S) to cant
beam (E), fix the big canopy corner (T) to the cant
beam bottom tube (G).
Hang the netting(V) on screen (B1/B2) placed in the
inside of the gazebo by using ring (GG); then hang the
curtain (U) on the screen (B1/B2) by using ring (GG),
placed in the outside of gazebo；Fasten the gazebo on
lawn by using stake.
11
NOTE: To avoid destroying the finish, do not put the
parts on the ground directly.
Tie the Velcro and strap on the post(A)

9
Care and Cleaning
□ Before using, clean the gazebo completely with a soft dry towel.
□ Do not put your gazebo in wet conditions where there is a risk of rust developing.
□ When not in use, store in a cool, dry area.
□ Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that protects it from rusting.
However, due to the nature of iron, surface oxidation (rust) will occur once these protective coatings are scratched. This is a natural
process and is not a defect! To minimize this condition, we recommend care when assembling & handling the product to prevent
scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface
rust can also be easily removed witha light application of any rust removing solution, we also recommend WD-40, which is readily
available in all major stores. If no immediate action is taken to get rid of the surface oxidation (rust), the oxidation (rust) may start
dripping on to deck or patio causing unsightly stains, which may be difficult to remove. This can be prevented if the corrective
preventative measures are taken to keep the product from further oxidation or rusting.
MadeinChina