Sunny Health & Fitness 084 User manual

WOOD PLYO BOX WITH COVER
NO. 084
USER MANUAL
IMPORTANT! Please retain owner’s manual for maintenance and adjustment
instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
UNTIL YOU HAVE CONTACTED US: [e-mail] or 1-877 –90
SUNNY (877-907-8669).

IMPORTANT SAFETY INFORMATION
We thank you for choosing our product. To ensure your safety and health, please use
this equipment correctly. It is important to read this entire manual before assembling
and using the equipment. Safe and effective use can only be achieved if the equipment
is assembled, maintained and used properly. It is your responsibility to ensure that all
users of the equipment are informed of all warnings and precautions.
1. Before starting any exercise program, you should consult your physician to
determine if you have any medical or physical conditions that could put your health
and safety at risk, or prevent you from using the equipment properly. Your
physician’s advice is essential if you are taking medication that affects your heart
rate, blood pressure or cholesterol level.
2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your
health. Stop exercising if you experience any of the following symptoms: pain,
tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness,
dizziness or feelings of nausea. If you do experience any of these conditions, you
should consult your physician before continuing with your exercise program.
3. Keep children and pets away from the equipment. The equipment is designed for
adult use only.
4. Use the equipment on a solid, flat level surface with a protective cover for your floor
or carpet. To ensure safety, the equipment should have at least 4 feet (1.2 M) of free
space all around it.
5. Ensure that all nuts and bolts are securely tightened before using the equipment.
The safety of the equipment can only be maintained if it is regularly examined for
damage and/or wear and tear.
6. Always use the equipment as indicated. If you find any defective components while
assembling or checking the equipment, or if you hear any unusual noises coming
from the equipment during exercise, discontinue use of the equipment immediately
and do not use until the problem has been rectified.
7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that
may become entangled in the equipment.
8. Do not place fingers or objects into the moving parts of the equipment.
9. The maximum weight capacity of this unit is 500 pounds (227 KG).
10. The equipment is not suitable for therapeutic use.
11. To avoid bodily injury and/or damage to the product or property, proper lifting and
moving is required.
12. Your product is intended for use in cool, dry conditions. You should avoid storage in
extreme cold, hot or damp areas as this may lead to corrosion and other related
problems.
13. This equipment is designed for indoor and home use only, it is not intended for
commercial use!
1

PARTS LIST
NO.
PART
SPECIFICATION
QTY
A
Board
22.6 x18.7
1
B
Board
28.5 x18.7
1
C
Board
30x20
2
D
Board
24x20
2
E
Board
30x24
2
Screw
32
Cam Connector
32
Wood Dowel
32
Foam Cover
2
Side Foam Cover
2
Ordering Replacement Parts (U.S. and Canadian Customers only)
Please provide the following information in order for us to accurately identify
the part(s) needed:
√ The model number (found on cover of manual)
√ The product name (found on cover of manual)
√ The part number found on the “EXPLODED DIAGRAM” and “PARTS LIST”
(found near the front of the manual)
Please contact us at [e-mail] or 1-877 -90SUNNY (877-907-
8669).
2

EXPLODED DRAWING
3
Wood Dowel
Screw

ASSEMBLY INSTRUCTIONS
Tools needed: screwdriver (not included)
STEP 1:
Insert Screws into the Boards C, D,
and E as shown. Insert Wood
Dowels into the holes in C, D, and E
as shown.
Cam Connectors are pre-installed in the
boards.
The sides of the boards that have the C,
D or E labels face the inside.
STEP 2:
Fit Aonto B.
4

STEP 3:
Note: Check the arrow on the Cam
Connectors are pointing in the
direction of the screw hole so the
screws can fit into the Cam
Connectors.
Assemble 2 pcs Cto A. Fit the screws
into the Cam Connectors. Turn the
Cam Connectors clockwise to
tighten.
STEP 4:
Note: Check the arrow on the Cam
Connectors are pointing in the
direction of the screw hole so the
screws can fit into the Cam
Connectors.
Repeat to assemble 2 pcs D. Fit the
screws into the Cam Connectors. Turn
the Cam Connectors clockwise to
tighten.
5

STEP 5:
Note: Check the arrow on the Cam
Connectors are pointing in the
direction of the screw hole so the
screws can fit into the Cam
Connectors.
Assemble 2 pcs Eto Cand D. Fit the
screws into the Cam Connectors. Turn
the Cam Connectors clockwise to
tighten.
Assembly is complete!
6

ADDING THE COVER
A foam cover for the plyo box is included. This is OPTIONAL.
Fit the side foam covers to the box. The sides with the Velcro strips along the top
and bottom face outside. Fasten the Velcro. Fit the top and bottom covers onto
the box. Fasten the Velcro. Make sure the Velcro strips are securely fastened
along all edges.
The dimensions of the box with the added cover are 32” x 26” x 22”.
7
Version 1.1