Target Threshold 25" Roll Back Tufted Counter stool User manual

Threshold 25" Roll Back Tufted Counter stool & 30"
Roll Back Tufted Barstool
style # 507T/509T
>>assembly instructions

Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your room
in no time. Good luck-though we're condent you won't need it.
before you begin
1. Check for damaged or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
table of contents
introduction 2
hardware / parts list 3
assembly 4-9
2
tools needed

3
ITEM DESCRIPTION QUANTITY
A chair back 1
B chair seat 1
C pre-assembled front leg set 1
D left facing rail 1
E right facing rail 1 A
B
C
Hardware
(H1) x 2
short bolt
L=2 in
(H2) x 10
at washer
(H3) x 10
spring washer
(H4) x 4
medium bolt
L=2½ in
(H5) x 4
long bolt
L=3½ in
E
D
(H6) x 4
screw
L=1 in
(H7) x 1
hex wrench
E
F

step 1.
4
(H3) x 2
spring washer
(H1) x 2
short bolt
L=2 in
(H2) x 2
at washer
(H7) x 1
hex wrench
1. Peel back fabric cover on chair seat.
2. Attach chair seat to chair back.
3. Make sure the wooden dowel ts into the center hole.
4. Using (H1) short bolts, (H3) spring washer, and (H2) at washer, screw bolts
into the center section. Do not tighten bolts as you will level and tighten in step 5.
12-3 4
H2
H3
H1
(short bolt)
H2
H3
H1
B
A
B
2-4

(H3) x 4
spring washer
step 2.
5
(H5) x 4
long bolt
L= 3½ in
(H2) x 4
at washer
(H7) x 1
hex wrench
1. Finish attaching chair seat to chair back, using (H5) long bolt, (H3) spring washer, and
(H2) at washer, screw bolts into the corner holes.
2. Do not tighten bolts as you will level and tighten in step 5.
1
A
B
H2
H3
H5
(long bolt)
1
1

step 3.
(H3) x 4
spring washer
6
(H4) x 4
medium bolt
L= 2½ in
(H2) x 4
at washer
(H7) x 1
hex wrench
1. Place chair on a secure table or platform while assembling.
2. Attach front legs to chair using (H4) medium bolt, (H3) spring washer, and (H2) at
washer into the corner holes.
3. Do not tighten bolts as you will level and tighten in step 5.
2
H2
H3
H4
(medium bolt)
C
2
2

step 4.
7
(H6) x 4
screw
L= 1 in
1. Slide rails into legs matching the stickers for correct positioning.
2. Secure rails with the screws.
D
E
1
E
D
D
E
E
2
H6
D
D

step 5.
8
(H7) x 1
hex wrench
1. Turn chair upright on a level surface, push legs up or down as necessary to level.
2. Once leveled, tighten all bolts securely with hex wrench.
3. Adjust leveler, as shown in illustration, to help with leveling process.
H7
3
2
1

step 6.
9
1. Pull fabric cover back.
2. For additional assembly help or missing parts, call 855-MYTGHOME (855-698-4846).

© 2008 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.