Target Halsted FWS80476A User manual

>>assembly instructions TM
halsted
steel wicker side table
style # FWS80476A
dpci # 009005404

2
Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
ATTENTION:
This Table is not intended for use during any kind of inclement weather and the manufacturer is not, and can not be,
held responsible for any damages caused as a result of such weather. Weather-related damage, or damage as a
result of the Table not being stored properly when not in use, is not the responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, sleet), freezing
conditions and extreme heat, the Table needs to be stored in a dry, sheltered place to prolong the life and to avoid
damage to the Table.
IMPORTANT WARNING:
Unpack the box on a clean, soft, level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

3
WARRANTY:
This Table comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your new table, please call the customer service number below.
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2018

4
table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-9
QUESTIONS?
Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have t h e style number and DPCI number r eady when calling.

5
hardware
(Part G)×1
allen wrench
(Part E)×12
M6*20mm screw
(Part F)×12
washer

6
ITEM DESCRIPTION QUANTITY
A
D
B
wicker shelf
table top
1
2
1
A
B
C
2
Dtable leg 2
table leg 1
D
C
C

7
step 01:
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
(Part E)×12
M6*20mm screw
(Part F)×12
Φ13*Φ6.5*1.0 washer
(Part G)×1
allen wrench
Do not completely tighten screws until all screws are in place.
E
F
E
F
C
A
1. Line up the bolt holes on the end of the table leg 1 (C) and table leg 2 (D) with the
corresponding bolt holes on the table top (A). Secure with M6*20mm screws (E) and
washers (F) using allen wrench (G).
2. Repeat above step until the 4 table legs (C & D) are secured to the table top (A).
C
D
D

8
step 02:
(Part F)×12
(Part E)×12
M6*20mm screw
(Part G)×1
allen wrench
Φ13*Φ6.5*1.0 washer
Do not completely tighten screws until all screws are in place.
1. 1. Attach the wicker shelf (B) to the table legs (C & D).
2. Line up the bolt holes on the wicker shelf (B) with the corresponding bolt holes on the
table legs (B). Secure with M6*20mm screws (E) and washers (F) using allen wrench (G).
3. Repeat above step until the wicker shelf (B) is secured to all table legs (C & D).
B
C
E
F
C
D
D

9
step 03:
1. Tighten all the screws. Set table in an upright position on a
flat level surface.
You are now ready to enjoy your new table.

10