Target Berkshire FRS81033A User manual

4pk wicker dining chair
style # FRS81033A
dpci # 009004042
>>assembly instructions TM
Berkshire

Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
IMPORTANT WARNING:
Unpack the box on a clean soft level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
ATTENTION:
This Chair is not intended for use during any kind of inclement weather and the manufacturer is not
and can not be held responsible for any damages caused as a result of such weather. Weather-related
damage, or damage as a result of the Chair not being stored properly when not in use is not the responsiblity
of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, sleet), freezing
conditions and extreme heat, the Chair needs to be stored in a dry sheltered place to prolong the life and to avoid
damage to the Chair.
2

WARRANTY:
This Chair comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your chair, please call the customer service number below.
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2020
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
3

table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-11
QUESTIONS?
4Please call 855-MYTGTHOME (855-698-4846) parts and service. For faster service, have the style number and DPCI number r eady when calling.

hardware
5
ATTENTION: THE HARDWARE KIT IS FOR 4 CHAIRS
(Part E)×8
M6*25mm bolt with washer
(Part H)×1
allen wrench
(Part F)×20
M6*45mm bolt with washer
(Part G)×8
M6*60mm bolt with washer

ITEM DESCRIPTION QUANTITY
seat frame
4
4
4
4
A
B
C
D
6
back frame
left armrest
right armrest
C
D
A
B

7
step 01:
Do not completely tighten screws until all screws are in place.
(Part F)×2
M6*45mm bolt with washer
(Part H)×1
allen wrench
1. Attach the seat frame (C) to left armrest (B) by lining up bolt holes on the seat frame (C)
with corresponding bolt holes on the left armrest (B).
2. Secure with M6*25mm bolt with washer (E) and M6*45mm bolt with washer (F) using allen wrench (H).
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
1. 2.
(Part E)×1
M6*25mm bolt with washer
B
C
E
FF

step 02:
Do not completely tighten screws until all screws are in place.
(Part H)×1
allen wrench
1. Attach the back frame (D) to the seat frame (C) by lining up bolt holes on the back frame (D)
with corresponding bolt holes on the seat frame (C).
2. Secure with M6*45mm bolt with washer (F) using allen wrench (H).
8
(Part F)×1
M6*45mm bolt with washer
F
C
D
B

step 03:
Do not completely tighten screws until all screws are in place.
(Part H)×1
allen wrench
1. Attach the right armrest (A) to the seat frame (C) by lining up bolt holes on the seat frame (C)
with corresponding bolt holes on the right armrest (A).
2. Secure with M6*25mm bolt with washer (E) and M6*45mm bolt with washer (F) using allen wrench (H).
1. 2.
(Part E)×1
M6*25mm bolt with washer
(Part F)×2
M6*45mm bolt with washer
A
C
F
E
9

step 04:
10
Do not completely tighten screws until all screws are in place.
1. Line up the bolt holes on the back frame (D) with the corresponding bolt
holes on the right armrest (A) and left armrest (B).
2. Secure with M6*60mm bolt with washer (G) using allen wrench (H).
3. Repeat above steps for other chairs.
(Part H)×1
allen wrench
(Part G)×2
M6*60mm bolt with washer
A
B
DG

step 05:
.
2. Turn the chair to upright position onto a flat level surface.
Put the cushion on the chair.
You are now ready to enjoy your new chair.
1. Tighten all the bolts.
11

12

TM
2020 Target. The Bullseye Design is a trademark of Target Brands Inc. All rights reserved.