Target DSBSCDSKES User manual

>>
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
desk
assembly instructions
style # DSBSCDSKES (espresso)
dpci # 249-14-0055
tcin # 14387761
style # DSBSCDSKWH (white)
dpci # 249-14-0057
tcin # 14388063
style # DSBSCDSK01 (white wash)
dpci # 249-14-3852
tcin # 52398882
style # DSBSCDSKWL (walnut)
dpci # 249-14-0056
tcin # 14387762
style # DSBSCDSKGY (weathered smoke)
dpci # 249-14-1800
tcin # 52530825
style # DSBSCDSKEB (black)
dpci # 249-14-0514
tcin # 14390558

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-11
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 12
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
(H4) x 12
allen head bolt
(H5) x 12
lock washer
(H6) x 12
washer
(H7) x 1
drawer pull
(H8) x 2
drawer pull bolt
(H9) x 1
allen wrench

5
exploded diagram
ITEM DESCRIPTION QUANTITY
1 top panel 1
2 left front leg 1
3left back leg 1
4 right front leg 1
5 right back leg 1
6 bottom stretcher 1

6
how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
1. 2. 3.
4. 5.

7
step 1: open draw

step 2: attach left front leg/right front leg/right back leg to top panel
(H1) x 6
wooden dowel
(H4) x 9
allen head bolt
(H5) x 9
lock washer
(H6) x 9
washer
(H9) x 1
allen wrench
2.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
2.2. Make sure bolts go through the pre-drilled holes properly.
2.3. Do not over tighten bolts.
8
Add 2 wooden
dowels to leg. (x3)
2.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
2.2. Make sure bolts go through the pre-drilled holes properly.
2.3. Do not over tighten bolts.

step 3: attach bottom stretcher to right back leg
(H1) x 2
wooden dowel
(H2) x 1
cam bolt
(H3) x 1
cam
3.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
9
3.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.

step 4: attach left back leg
(H1) x 4
wooden dowel
(H2) x 1
cam bolt
(H3) x 1
cam
(H4) x 3
allen head bolt
(H5) x 3
lock washer
(H6) x 3
washer
(H9) x 1
allen wrench
4.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
4.4. Make sure bolts go through the pre-drilled holes properly.
4.5. Do not over tighten bolts.
10