Target Southport FTS70837A User manual

>>assembly instructions TM
Southport
Dining Table
style # FTS70837A
dpci # 009000845

2
Congratulations on your latest Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you'll be on your way to transforming your patio in no time.
Good luck – though we're confident you won't need it.
ATTENTION:
This Table is not intended for use during any kind of inclement weather and the manufacturer is not, and can not be,
held responsible for any damages caused as a result of such weather. Weather-related damage, or damage as a
result of the Table not being stored properly when not in use, is not the responsibility of the manufacturer.
During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, sleet), freezing
conditions and extreme heat, the Table needs to be stored in a dry, sheltered place to prolong the life and to avoid
damage to the Table.
IMPORTANT WARNING:
Unpack the box on a clean, soft, level surface and make sure all parts have been included.
To replace missing or damaged parts please call 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.

3
WARRANTY:
This Table comes with a one year limited warranty against original manufacture defects. If you experience
trouble with your new table, please call the customer service number below.
before you begin
1. Check for damage or missing parts. Call 855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.
Target Corporation
Toll Free at: 855-MYTGTHOME (855-698-4846) during 7am - 7pm CST M-F, and 8am - 5pm CST Saturday.
Code: Yotrio 2019

4
table of contents
introduction
hardware
parts list
assembly
2-3
5
6
7-10
QUESTIONS?
Please call 855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number r eady when calling.

5
hardware
(Part E)×8
M6*15mm screw with washer
(Part G)×8 (Part I)×1
allen wrench
washer
(Part F)×8
M6*40mm screw with washer
(Part H)×8
M6 nut
(Part J)×1
wrench

6
ITEM DESCRIPTION QUANTITY
1
1
A
Btable top
hole cover
C connected bracket 1
D table leg 4A
B
C
D

step 01:
1. Attach the table leg (D) to the table top (B) by lining up the bolt holes on the end
of the table leg (D) with the correspoding bolt holes on the back side of the table top (B).
2.Secure with M6*15mm screw with washer (E) , tighten using allen wrench (I).
Repeat this step until all four table leg (D) are secured to the table top (B).
ATTENTION: To avoid damage to your new patio furniture, please
use either the carton or another soft surface such as carpet as a
working surface to prevent product damage during assembly.
Do not completely tighten screws until all screws are started.
7
(Part E)×8
M6*15mm screw with washer
(Part G)×8
washer
(Part F)×8
M6*40mm screw with washer
(Part I)×1
allen wrench
(Part H)×8
M6 nut
(Part J)×1
wrench
EE
B
D

step 02:
1. Attach the connected bracket (C) to the table leg (D) by lining up the bolt holes on the
connected bracket (C) with the correspoding bolt holes on the middle of the leg (D).
2.Secure with M6*40mm screw with washer (F), washer (G) and M6 nut (H). tighten
Repeat this step until all four table legs (D) are secured to the connected bracket (C).
using allen wrench(I) and wrench (J).
Do not completely tighten screws until all screws are started.
8
(Part E)×8
M6*15mm screw with washer
(Part G)×8
washer
(Part F)×8
M6*40mm screw with washer
(Part I)×1
allen wrench
(Part H)×8
M6 nut
(Part J)×1
wrench
D
C
F
F
H
H
G
G

9
step 03:
1. Tighten all the screws.
Return table to upright position onto a flat level surface.
put the hole cover(A) on the hole of the table top (B).
AB

10
step 04:
You are now ready to enjoy your new table
.