Target BK3SHLFXEB User manual

>> assembly instructions
3 shelf bookcase
ebony
style # BK3SHLFXEB
dpci # 249-14-0018
espresso
style # BK3SHLFXES
dpci # 249-14-0019
midtone/cherry
style # BK3SHLFXMT
dpci # 249-14-0020
chestnut
style # BK3SHLFXCH
dpci # 249-14-0368
white
style # BK3SHLFXWH
dpci # 249-14-0049
rustic
style # BK3SHLFXBR
dpci # 249-14-1414

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re confident you won’t need it.
tools needed
Before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) for parts and service.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Gather all tools prior to assembly.

3
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
Table of Contents
Introduction 2
Hardware 4
Parts list 5
How to use the cam lock system 6
Assembly 7-15

4
hardware
(H1) x 17
cam
(H4) x 17
cam bolt
(H5) x 21
wooden dowel
(H6) x 23
short pan-head screw
(H2) x 8
shelf support
(H3) x 1
wall anchor
(H11) x 2
washer
(H8) x 1
strap
(H7) x 4
1” flat-head screw
(H9) x 1
1-1/2” flat-head screw
(H10) x 1
19mm pan-head screw

Z Top panel 1
Y Left end panel 1
X Right end panel 1
W Adjustable shelves 2
V Bottom shelf 1
Q Back panel 1
J Decorative molding 1
I Top front stretcher 1
H Bottom front stretcher 1
E Adjustable shelf stretchers 2
ITEM DESCRIPTION QUANTITY
5
E
I
J
Z
Q
Y
X
W
V
H

how to use the cam lock system
.3
.1
4. .
6
.5
180º
6
2.

7
1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
4. Repeat this step for the second adjustable shelf.
step 1.
x2
(H1) x 4
cam
(H5) x 6
wooden dowel
(H4) x 4
cam bolt
E
W

step 2.
8
1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H1) x 2
cam
(H5) x 3
wooden dowel
(H4) x 2
cam bolt
V
H

step 3.
9
1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H1) x 3
cam
(H5) x 4
wooden dowel
(H4) x 3
cam bolt
Y
H
V
I

step 4.
10
1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H1) x 3
cam
(H5) x 4
wooden dowel
(H4) x 3
cam bolt
X

step 5.
11
1. Do not over tighten screws.
J
(H7) x 4
1” flat-head screw

step 6.
12
1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2. Screw-In cam bolts must be screwed down flush with wood panel.
3. Refer to page 6 for instructions on how to use the cam lock system.
(H1) x 5
cam
(H5) x 4
wooden dowel
(H4) x 5
cam bolt
Z

1. Do not over tighten screws.
screw hole for tip kit
pre-drilled holes
step 7.
13
(H6) x 23
short pan-head screw
Q
Begin by installing all of the screws along one
edge of the back panel. Next, using a square
or tape measure, make sure that the cabinet is
square. (If using a tape measure, the distance
from one corner, diagonally to the other corner
should be the same in both directions.) Install
the remaining screws, starting with the corners.
!
WARNING
Seriousor fatal crushing injuries can occur
fromfurniture tip-over. To help prevent tip-
over:
-Installtip-over restraint provided.
-Placeheavy items on lower shelves and as
far ba ck as possible.
-Placeheaviest items in the lowest drawers.
-Unlessspecifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Neverallow children to climb or hang on drawers,
doo rs, or shelves.
-Neveropen more than one drawer at a time.
(OR)
-Donot defeat or remove the drawer interlock system.
Useof tip-over restraints may only reduce,
butnot eliminate, the risk of tip-over.
Thisisa permanent label. Do not remove.
pre-drilled
holes

step 8.
14
1. Insert shelf supports into desired hole. Different holes accommodate different shelf heights.
2. Slide middle shelves in.
(H2) x 8
shelf support
W
W

step 9.
15
(H3) x 1
wall anchor
Fasten anti-tip strap
with wall screw provided
(H8) x 1
strap
(H9) x 1
1-1/2” flat-head screw
Position against wall
Mark position of strap
hole on wall
Drill 17/64” hole
Tap in wall anchor
a. Position against wall
b. Mark position of strap
hole on wall
c. Drill 1/4” hole
d. Tap in wall anchor
1.)
2.)
(H10) x 1
19mm pan-head screw
(H9) (H11)
(H3)
(H11) x 2
washer
(H10)
(H11) (H8)
!
WARNING
Seriousorfatalcrushing injuriescan occur
fromfurnituretip-over. To help prevent tip-
over:
-Installtip-over restraint provided.
-Placeheavyitems on lowershelves and as
far backas possible.
-Placeheaviestitems inthe lowest drawers.
-Unlessspecificallydesignedto accommodate,
donot set TVs or other heavy objectson top of
this product.
-Neverallow children to climb orhangond rawers,
doors,or shelves.
-Neveropen more than one drawerat a time.
(OR)
-Donot defeat or removethe drawer interlocksystem.
Useoftip-overrestraints may only reduce,
butnoteliminate, the risk of tip-over.
Thisisapermanentlabel. Do not remove.

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.
65 lbs.
per shelf
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result
in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
16
!WARNING
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent tip-
over:
- Install tip-over restraint provided.
- Place heavy items on lower shelves and as
far back as possible.
- Place heaviest items in the lowest drawers.
- Unless specifically designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
- Never allow children to climb or hang on drawers,
doors, or shelves.
- Never open more than one drawer at a time.
(OR)
- Do not defeat or remove the drawer interlock system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is a permanent label. Do not remove.

© 2014 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.