Target fairglen TGFGCFTBWH User manual

>>
fairglen
co󰀨ee table
assembly instructions
style # TGFGCFTBWH (white)
dpci # 249-17-2886
TCIN # 54158518
© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-11
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 21
wooden dowel
(H2) x 20
cam bolt
(H3) x 20
cam
(H4) x 4
at head screw

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B left side panel 1
C right side panel 1
D partition 1
E sliding door 1
F bottom panel 1
G support rail 1
H back panel 1

6
how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
1. 2. 3.
4.4. 5.5.

7
step 1: attach top panel to back panel and partition
(H1) x 7
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
(H4) x 4
at head screw
1.1. Carefully tap small wooden dowels into place in top panel. Leave 1/2” of the dowels sticking out.
1.2. Align at head screws with pre-drilled holes to attach support rail to top panel. Do not over tighten screws.
1.3. Screw-In cam bolts must be screwed down ush in top panel.
1.4. Refer to page 6 for instructions on how to use the cam lock system.
1.5. Do not over tighten bolts.

8
step 2: attach bottom panel
(H1) x 4
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
2.1. Carefully tap small wooden dowels into place in bottom panel. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush in bottom panel.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.

9
step 3: install sliding door
3.1. Insert sliding door into tracks located on top panel and bottom panel.

10
step 4: attach right side panel
(H1) x 5
wooden dowel
(H2) x 6
cam bolt
(H3) x 6
cam
4.1. Carefully tap small wooden dowels into place in right side panel. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush in right side panel.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
4.4. Do not over tighten bolts.