Target Windham Accent cabinet WNCBSHGY User manual

windham
accent cabinet
assembly instructions
style # WNCBSHGY (grey)
dpci # 249-16-0012
tcin # 14646619
style # WNCBSHRD (red)
dpci # 249-16-0014
tcin # 14646618
style # WNCBSHBK (black)
dpci # 249-16-0015
tcin # 14646617
style # WNCBSHBL (teal)
dpci # 249-16-0024
tcin # 14646616
style # WNCBSHWH (shell)
dpci # 249-16-0025
tcin # 14646615
style # WNCBSH2DOV (overcast)
dpci # 249-16-4303
tcin # 50077424
>>
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-16
how to adjust door alignment 17
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 16
wooden dowel
(H2) x12
cam bolt
(H3) x 12
cam
(H4) x 27
short pan-head screw
(H5) x 8
short at-head screw
(H6) x 16
shelf support
(H7) x 2
knob
(H8) x 2
knob bolt
(H9) x 2
magnet
(H10) x 4
allen head bolt
(H11) x 4
lock washer
(H12) x 6
washer
(H13) x 1
allen wrench
(H14) x 1
long pan-head screw
(H15) x 1
wall strap
(H16) x 1
wall anchor
(H17) x 1
wall screw

exploded diagram
ITEM DESCRIPTION QUANTITY
1 top panel 1
2 left side frame 1
3 right side frame 1
4 bottom panel 1
5 partition panel 2
6 back panel 1
7 left door 1
8 right door 1
9 side adjustable shelf 2
10 center adjustable shelf 2
5

6
how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
1. 2. 3.
4. 5.

step 1: attach partition panels to bottom panel
(H1) x 4
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
1.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7
position cams outside
position cams outside
nished edge
nished edge

step 2: attach right side frame
(H1) x 2
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
2.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
8

step 3: attach left side frame
(H1) x 2
wooden dowel
(H2) x 2
cam bolt
(H3) x 2
cam
3.1. Carefully tap small wooden dowels into place. Leave 12mm of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
9

step 4: prepare top panel
(H2) x 4
cam bolt
(H9) x 2
magnet
(H4) x 4
short pan
head screw
4.1. Screw-In cam bolts must be screwed down ush.
4.2. Do not over tighten screws.
10
(H4) x 4
short pan
head screw