Target VENUS BISTRO TABLE User manual

1
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
ASSEMBLY INSTRUCTIONS
VENUS BISTRO TABLE

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that
may damage the product.
2. Take care when liing.Product should be assembled as near as possible to
the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instrucons carefully before beginning assembly.
5. The packaging and contents can be a choking hazard, therefore keep out of
reach of small children at all me.
6. Do not over ghten the screws and bolts as this may damage the threads.
7. Failure to follow the above instrucons may result in damage and or the
incorrect assembly of the furniture.
2
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
2
20 2

3
COMPONENTS / HARDWARE
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
A B
E
C
1PC 4PCS
F
1PC 12PCS
8PCS
D
GH
1PC
12PCS
4PCS M6*20M6*25

4
STEP 1
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
A
PLACE THE TABLE TOP UPSIDE DOWN ON A FLAT,SOFT SURFACE TO AVOID DAMAGE,
ALIGN HOLES IN PART B OVER THREADS IN PART A,
ATTACH PART B TO PART A USING BOLTS AS SHOWN BELOW.
BD
E
G

5
STEP 2
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
ALIGN HOLES IN PART C OVER THREADS IN PART B,
ATTACH PART C TO PART B USING BOLTS AS SHOWN BELOW.
COMPLETELY TIGHTEN ALL BOLTS AT THIS POINT.
F
G
D

6
STEP 3
FURNITURE NOT SUITABLE FOR COMMERCIAL USE
YOUR TABLE IS READY FOR USE.

7