Target Bullseye SH LPB100PAL1 User manual

1
>>assembly instructions
SH
bench
style # LPB100PAL1
dpci # 084-09-0442

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work
for you. All you need to do is follow our simple instructions and you’ll be on your way to
transforming your room in no time. Good luck--though we’re confident you won’t need it.
before you begin
1． Check for damaged or missing parts. Call 1-866-578-6569 to order missing supplies.
2． Use the carton as a working surface to prevent product damage during assembly.
3． Gather all tools prior to assembly.
tools needed

3
table of contents
………………………………………………………...
introduction 2
hardware 4
parts list 5
assembly 6-8
QUESTIONS ? Just call 1-866-578-6569 for parts and service. For faster service, have the style number and DPCI number ready when calling.

4
hardware
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
(H1) x 11
M6*35mm bolt
(H5) x 1
M6 wrench
(H2) x 11
M6 spring washer
(H3) x 11
M6 washer
(H4) x 4
foot cap (pre-assembled)

5
ITEM DESCRPTION QUANTITY
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
A left armrest 1
B right armrest 1
C backrest 1
D seat 1

6
step1:
Attach left armrest (A) and right armrest (B) to seat (D) separately by using bolts (H1) and washers (H2) (H3). Do not fasten bolts (H1) tightly.
(H1) x 8
M6*35mm bolt
(H2) x 8
M6 spring washer
(H3) x 8
M6 washer
(H2)
(H3)

7
step 2:
Attach left armrest (A) and right armrest (B) to backrest (C) (as shown in Fig.1).
Fig.1
Fig.2

8
step3:
Connect backrest (C) with seat (D) by using bolts (H1) and washers (H2) (H3) (as shown in Fig.2). Do not over tighten.
Fasten all the bolts.
(H1) x 3
M6*35mm bolt
(H2) x 3
M6 spring washer
(H3) x 3
M6 washer
Fig.1
Fig.2
(H3) (H2)

9
Care & Maintenance:
1. Before using, clean the bench completely with a soft dry towel.
2. Do not place your bench in wet conditions where there is a risk of rust developing.
3. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely. Do not use strong
4. When not in use, store in a cool, dry location away from sunlight.
detergent or abrasive cleaners.

© 2010 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
TM