Target Paulo Open Desk TGELODSKWH User manual

paulo
open desk
>> assembly instructions
style # TGELODSKWH (weathered white)
dpci # 249-14-2307
tcin # 53562663
style # TGELODSKGY (weathered smoke)
dpci # 249-14-2306
tcin # 53562665
style # TGELODSKBR (midtone)
dpci # 249-14-2305
tcin # 53562666
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-12
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 4
cam
(H2) x 4
cam bolt
(H3) x 4
wooden dowel
(H4) x 20
short round head bolt
(H5) x 1
long pan head screw
(H6) x 1
short pan head screw
(H7) x 1
wall strap
(H8) x 1
wall anchor
(H9) x 22
washer
(H10) x 4
at head screw
(H11) x 2
at head bolt
(H12) x 1
allen wrench

exploded diagram
ITEM DESCRIPTION QUANTITY
A left top panel 1
B left center panel 1
C left bottom panel 1
D left back panel 1
E right top panel 1
F right bottom panel 1
G right back panel 1
H left side frame 1
I center frame 1
J right side frame 1
K stretcher 1
5

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
1. 2. 3.
4. 5.

step 1: prepare left center panel and right top panel
(H2) x 4
cam bolt
1.1. Screw-In cam bolts must be screwed down ush.
1.2. Refer to page 6 for instructions on how to use the cam lock system.
1.3. Do not over tighten bolts.
7

step 2: attach left center/bottom/back panels and right top/bottom/back panels
(H3) x 4
wooden dowel
(H1) x 4
cam bolt
(H10) x 4
at head
screw
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
2.4. Do not over tighten bolts.
8
(H1) x 4
cam bolt
(H10) x 4
at head
screw

step 3: attach center frame and right side frame
(H4) x 6
round head
bolt
(H12) x 1
allen wrench
(H11) x 2
at head bolt
(H9) x 6
washer
3.1. Do not over tighten bolts.
9
(H11)

step 4: attach left panels and left side frame
(H4) x 10
round head
bolt
(H9) x 10
washer
4.1. Do not over tighten bolts.
10