Target 249-14-0040 User manual

© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
horizontal bookcase
>> assembly instructions
style # CAHRZLBKES (espresso)
dpci # 249-14-0040
tcin # 13556943
style # CAHRZLBKEB (ebony)
dpci # 249-14-0358
tcin # 13556946
style # CAHRZLBKMT (midtone/cherry)
dpci # 249-14-0364
tcin # 13556939
style # CAHRZLBKCH (chestnut)
dpci # 249-14-0365
tcin # 13556938
style # CAHRZLBKWH (white)
dpci # 249-14-0239
tcin # 15466635
style # CAHRZLBKBR (rustic)
dpci # 249-14-1424
tcin # 17315139
style # CAHRZLBKGY (gray)
dpci # 249-14-5352
tcin # 53587297
style # CAHRZLBKWL (walnut)
dpci # 249-14-2876
tcin # 53587294

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-14
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 48
cam
(H2) x 8
shelf support
(H3) x 1
wall anchor
(H4) x 48
cam bolt
(H5) x 50
wooden dowel
(H6) x 12
cam cover
(H7) x 30
pan-head screw
(H8) x 1
wall strap
(H9) x 2
5/8” washer
(H10) x 1
wall screw
(H11) x 1
19mm pan-head screw

5
exploded diagram
ITEM DESCRIPTION QUANTITY
A top panel 1
B left side panel 1
C right side panel 1
D rear rail 1
E front rail 1
F right adjustable shelf 1
Gxed shelf 2
H left divider 1
I right divider 1
J bottom panel 1
K left adjustable shelf 1
L back panel 1
M adjustable shelf trim 2
Nxed shelf trim 2
O bottom front trim 1
P bottom rear trim 1

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
1. 2. 3.
4. 5.

step 1: attach trim to xed shelves then attach dividers
(H1) x 12
cam
(H5) x 12
wooden dowel
(H4) x 12
cam bolt
1.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7
nished edge
x2

step 2: attach front and rear trim to bottom panel then attach to dividers
(H1) x 10
cam
(H5) x 8
wooden dowel
(H4) x 10
cam bolt
2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush.
2.3. Refer to page 6 for instructions on how to use the cam lock system.
8
nished edge

step 3: attach right side panel/rear rail/front rail
(H1) x 4
cam
(H5) x 8
wooden dowel
(H4) x 4
cam bolt
3.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
3.2. Screw-In cam bolts must be screwed down ush.
3.3. Refer to page 6 for instructions on how to use the cam lock system.
9
nished edge

step 4: attach left side panel
(H1) x 4
cam
(H5) x 8
wooden dowel
(H4) x 4
cam bolt
4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
10

step 5: attach top panel
(H1) x 14
cam
(H5) x 10
wooden dowel
(H4) x 14
cam bolt
(H6) x 12
cam cover
5.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
5.2. Screw-In cam bolts must be screwed down ush.
5.3. Refer to page 6 for instructions on how to use the cam lock system.
5.4. Place cam covers over any cam holes visible on the front of the bookcase.
11
Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.
Place cam covers over any cam holes visible on the front of the bookcase.

step 6: attach back panel
Begin by installing all of the screws along one
edge of the back panel. Next, using a square
or tape measure, make sure that the cabinet is
square. (If using a tape measure, the distance
from one corner, diagonally to the other corner
should be the same in both directions.) If not,
apply gentle pressure to the diagonally opposite
corners to shift case into alignment. Re-measure
to ensure equal distances. Install the remaining
screws, starting with the corners.
(H7) x 30
pan-head screw
6.1. Make sure the screws go through the pre-drilled holes properly.
6.2. Do not over tighten screws.
12

step 7: attach adjustable shelf trim to adjustable shelves then install
(H1) x 4
cam
(H5) x 4
wooden dowel
(H4) x 4
cam bolt
(H2) x 8
shelf support
7.1. Refer to page 6 for instructions on how to use the cam lock system.
7.2. Insert shelf supports into desired hole. Di󰀨erent holes accommodate di󰀨erent shelf heights.
7.3. Angle shelves to t between the rails and set on top of shelf supports.
13
shelf support
(H2) x 8

step 8: install anti-tip kit
(H11) x 1
19mm pan head screw
(H8) x 1
wall strap
(H9) x 2
washer
(H3) x 1
wall anchor
(H10) x 1
wall screw
Position against wall
Mark position of strap hole on
wall
Drill 1/4’’ hole
Tap in wall anchor
Fasten anti-tip strap
with at-head screw provided
14
(H10) (H9)
(H3)
(H11)
(H9) (H8)
(H11) x 1
19mm pan head screw
(H8) x 1
wall strap
(H9) x 2
washer
(H3) x 1
wall anchor
(H10) x 1
wall screw
Position against wall
Mark position of strap hole on
wall
Drill 1/4’’ hole
Tap in wall anchor
Fasten anti-tip strap
with at-head screw provided
(H10) (H9)
(H3)
(H11)
(H9) (H8)

WARNING
Children have died from furniture tipover.
To reduce the risk
of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a
TV on this product.
• NEVER allow children to stand, climb or
hang
on drawers, doors, or shelves.
• Place heaviest items
in the lowest drawers.
• NEVER open more than one drawer at a time.
(OR)
• Do not defeat or remove the drawer interlock
system.
This is a permanent label.
Do notremove!
1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in
excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.
2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.
15
65 lbs.
per shelf
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2018 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.