Teknim TFM-1190 User manual

Yayın Tarihi: 16/01/2018
Rev:00
Manufacturer
* 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier upon
the purchase of equivalent new equipment, or dispose of it at designated collection points. For more
information see: www.recyclethis.info.
Important Warnings
General
✓Before using the device read this manual carefully. Keep it just in case of necessity.
✓Abide all the rules and precautions stated in the manual. Follow all the instructions one by one.
✓Keep the devices away from water and moisture
Conditions
Do not energize the device above or below the given limits of extreme hot or cold conditions,
Temperature: Between -10°C and +70°C
Relative Humidity: %95 RH max
Service
Do not try to fix the device on your own. Removal of cover may end up with electricity shock.
In case of any defect or malfunction, contact with your dealer or with authorized service. All the technical
interventions have to be done by technicians of company.
Malfunctions that require technical service
In case of any malfunction or below conditions contact with your authorized service,
✓When Mains cable or the plug is harmed,
✓Contact of device with a fluid,
✓Exposure of rain and water,
✓Fell down of device or harmed outer cover,
✓Serious performance fall on the device,
✓Depending on the instructions stated in manual, if your device not working properly
Contact with your authorized service in such terms.
Maintenance on your own
Do not try to fix the device on your own. Removal of cover may end up with electricity shock. In case of any
defect or malfunction, contact with your dealer or with authorized service. All the technical interventions have
to be done by technicians of company. Device must be cleaned up with a dry fabric. No-chemicals are
allowed for cleaning
Transportation
Device must be carefully transported avoiding all physical bump, stroke and possible fluid entry. Malfunctions
that caused by improper transportation is not under warranty.
Human and Environmental Health
This device contains no chemical or biological elements that could harm human condition.
TFM-1190
Analoge Addressable Conventional Zone and
Siren Module
Installation and Operating Manual
Warning: Do not attempt to remove the electronic board from its plastic case. The electronic board is
closed for your safety. Users should avoid from interference.
Bilgi Elektronik San. ve Tic. A.Ş.
Dudullu Organize Sanayi Bölgesi 1. Cadde İsmet Tarman İş Merkezi
No:1 Kat:2 No:32 Ümraniye / İstanbul / Türkiye
Telephone: [phone] Fax: [phone]
Sales: sa[email protected]
Technical Support: [email protected]

General Information
TFM-1190 Analogue Addressable Conventional Zone and Siren Module, is a module designed to be used with
TFP-12xx series addressable fire alarm panels and allows the use of conventional devices in the addressable
system, which can transmit alarm and fault informations via the loop in a zonal sense and gives a siren
output. For the conventional input status, the user can choose between the event types "Alarm, Evacuation,
Reset, Silent, Fault, None". It is also possible to select from "Siren, General Siren, General Fault, Zonal Alarm,
Zonal Siren, Zonal Fault, None" event types for siren output. The module has 24V external power supply
input. The external supply is used for the supply of conventional devices and the siren outputs. The external
supply is supervised for interruptions on power.
The TFM-1190 modules are addressed by the TFCM-1801 Addressing Module. With the use of the module,
address repetition error is prevented. The addressed detector can be used quickly and easily by adding on a
loop as described in the "TFP-12xx Series Analogue Addressable Fire Alarm Control Panel Installation &
Operation Manual".
General features
•Adjustable short circuit, open circuit and alarm current values
•Adjustable reset time
•32 detectors per zone or manual call points.
•Zone input information can be assigned as alarm, evacuate, fault, reset, silent
•Siren output can be activated in a zonal alarm, general alarm or fault conditions
•Two processor and isolated hardware design
•2 LED indicators for power and communication / alarm
•Suitable for wall and rail mounting
Technicial Specifications
Operating Temperature Range
-10C ~ 55C (14F ~ 131F)
Humidity
95% RH (max)
Dimensions (mm)
110x76x32mm
Housing Material
White Color, ABS Plastic
Weight
140 gr
Loop
Poop Voltage
18V –32VDC
Average Current
150uA (@32V)
Maximum Alarm Current
1.5mA (@32V)
Communication Protocol
Flashlink
Power Input
Supply Voltage
22V –26VDC
Average Current
20mA (@24V) + Zone Current + Siren Current
Alarm Current
40mA (@24V) + Zone Current + Siren Current
Zone
Number of Detectors
32 detectors per zone or manual call points.
Default Alarm Current
20mA
Cable Resistance
40ohm (max)
Cable Length
1,5km 1,5mm² (max)
Cable Type
2 x 1,5mm² J-Y(St)Y…Lg (Recommended)
Siren
Output Current
500mA (F1 Fuse)
End of Line Resistor
4K7 ohm, %5, 1/4W
Cable Type
2 x 1,5mm² J-Y(St)Y…Lg (Recommended)
Indications
Red Led (It is constantly lit)
Indicates conventional alarm input
Red Led (Blinks for 4s)
Indicates that the siren output is active
Blue Led (Blinks for 20s)
Indicates module-to-loop communication
Blue Led (Blinks for 4s)
Indicates that the module has any error conditions (short circuit,
open circuit, power supply)
Greenl Led (It is constantly lit)
Indicates that the external power supply is normal condition
Note: When the blue led and the red led are lit at the same time, a purple color appears.
Mounting and Connection
You can use the "WALL MOUNTING TEMPLATE" on the right side of the mounting page with the marking
purpose to fix the product wall.
Accessory
The TFM-1190 is designed properly for rail mounting. To mount the rail, you must use the TFA-0190 DIN Rail
Mounting Kit. The appliance should be fixed by the two screw holes on the back of the product.
WALL ASSEMBLY TEMPLATE
Warning: The product only works with TFP-121x, TFP-122x and TFP-123x Analogue Addressable
Fire Alarm panels.