teko Astra-10 Ver.2 Installation instructions

Astra-10 Ver.2
Light Alerter
User Instruction*
Sales:
Controlex GmbH
Philosophenweg 31-33
47051 Duisburg,Germany
+49 (0) 203/393 91 188
[e-mail]
www.controlex.eu
Warranty service and
technical support:
TEKO-TD
Prospekt Pobedy str. 19
420138 Kazan, Russia
[phone]
[email protected]z
www.teko.biz
Made in Russia
Rev. 10-2v1_0_instr_EN
1 FUNCTION
The alerter is intended for light alerting about
current status of an object equipped with a
control panel of a fire/intrusion detection and
alarming system.
2 SPECIFICATIONS
Contrast perception of light signal
against ambient light background, Lx, min ...500
Light signal viewing angle,°......................... 180
Power supply voltage, V................from 10 to 15
Current consumption, mA, max......................60
Overall dimensions, mm, max:
- diameter ......................................................90
- height...........................................................26
Weight, kg, max..........................................0,06
Operating Conditions
Temperature range, °С............from - 30 to + 55
Relative air humidity, %..........up to 93 at + 40 °С
Without moisture condensation
3 DELIVERY SET
Delivery set contains holders and fasteners
(dowel –2 pcs., screw –2 pcs).
4 INSTALLATION LOCATION
1) Install alerter on bearing walls and carriers.
2) Inside permanent structures the preferable
places of installation are those well viewed from
outside.
3) Installation place should avoid exposure
to sunlight.
4) Connection wires should be located far
from power cables.
5 INSTALLATION PROCEDURE
1) Remove the cover by turning it
counterclockwise with respect to the base.
2) Remove PCB.
3) Fix alerter base on the wall.
4) Replace PCB and perform wiring (see par.6).
5) Replace alerter`s cover.

6 WIRING
Perform wiring to alerter`s terminals in
accordance with selected connection diagram
(see par.7).
-LHT, LHT+ - alerter connection terminals when
using 12 V DC as a power supply.
7CONNECTION DIAGRAMS 8 WARRANTY
The operation warranty period is 2 years from the date
of operation start-up but no longer than 2 years 6
months from the date of manufacturing subject to the
requirements of Operating Manual.
*For more detailed information refer to alerter
Operating Manual available for free from
www.controlex.eu.