Tennsco WELDED 3-PERSON LOCKER Instruction Manual

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #2600210
Tennsco Corp., Dickson, TN 37056-1888 • [phone]
WELDED 15- AND 16-PERSON LOCKERS
WELDED WALL MOUNTED LOCKERS
15- AND 16-PERSON LOCKERS
Tennsco fifteen- and sixteen-person locker
units provide economical storage for small
personal items such as tools, lunch boxes,
books, packages, etc., and a hanger bar for
hanging winter wraps, sweaters, lab coats,
shop coats or other garments.
All models are constructed of 16 gauge steel
frames and doors and 24 gauge body
components. Doors are louvered for
ventilation. Our baked-on powder coat finish
assures you years of trouble-free service.
PK-2600210
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment,
hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification
or repair by persons not authorized by eller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced,
modified or removed. UNLE CON IDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIE , INCLUDING BUT NOT LIMITED TO WARRANTIE OR MERCHANTABILITY AND FITNE FOR A PARTICULAR
PURPO E ARE HEREBY EXCLUDED:
b. BUYER REMEDY, IF ANY, FOR ANY DEFECTIVE GOOD HALL BE LIMITED TO A REFUND BY ELLER OR REPLACEMENT OF THE GOOD
AT ELLER OPTION, AND HALL IN NO EVENT INCLUDE DAMAGE OF ANY KIND, WHETHER INCIDENTAL, CON EQUENTIAL OR
OTHERWI E.
NO GOOD ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. eller shall have the right to inspect any goods claimed to be defective at Buyers
place of business or require Buyer to return the goods to eller for inspection on ellers premises. Transportation charges covering returned goods will
be borne by eller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
Mailing Address: TENNSCO CORP. hipping Address: TENNSCO CORP.
P.O. Box 1888 201 Tennsco Drive
Dickson, TN 3705 -1888 Dickson, TN 37055
( 15) 44 -8000 [phone] ( 15) 44 -8000 [phone]
WALL MOUNTED LOCKERS
Center sections of above units can be ordered
separately for use as wall-mounted units. Tennsco
three- and four-person wall mounted lockers can be
installed on walls, over doorways, or in halls where
space is limited. (NOTE: Since wall mounting procedures
vary widely depending on type of wall, instructions and
hardware for wall mounting are not included.)













TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
Model Number Purchase Date
Description of part(s) needed and part Your company name
number(s) as shown in Parts List (above) Contact person's name
Color (i.e. Medium Grey, Sand, etc.) Company the product was purchased from
Was item missing, or was it damaged?
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 E-mail address: [email protected]
Customer Service: [phone] Fax: [phone]
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.
PART NO.*
DESCRIPTION
1 Locker Door LBD-1212 16 15 4 3
2 Finger Pull LFP-1 16 15 4 3
3 Coat Rod Bracket LCRB-1 3 3 3 3
4 Coat Rod LCR-36 — 1 – 1
LCR-48 1 — 1 –
5 Number plate/clear label cover LNP-1 16 15 4 3
6 Push plug LPP-1 32 30 8 6
7 Bolts and Nuts #8-32 X 1/2" HWSRSHP-1 1 1 – –
HWBL-1 — — 4 3
REF.
NO.












REPLACEMENT PARTS
These items are included in the Hardware pack model# HWSRSHP-1.
We make every effort to ensure that all units ship complete and arrive undamaged. However, should your unit contain missing or damaged parts,
replacements may be obtained directly from us. To obtain proper replacement parts, follow the instructions below, or fill out the form at
www.tennsco.com/partsorder.html.
ASSEMBLY OF 15- AND 16-PERSON LOCKERS
1.Attach horizontal section frame
and side on both ends to
the frame and side of the
vertical units, using the
six bolts and nuts
provided for each side.
Tighten securely.
NOTE: Illustrations below show a 15-Person Locker; the 16-
Person locker assembles exactly the same, except
there is an additional locker opening in the center section.
2. After attaching horizontal section to verticle outer
units, stand units up using at least one more
person to help. Now slide three hangers over
coat rod and bolt hangers under middle section
as shown. Attach with one bolt per hanger.
Outer hangers bolt through side of unit; center
hanger can
bolt straight
up into locker
bottom.
3. Anchor unit to wall or floor.
Lockers are not intended to
stand free, and may topple if
not secured. (Units standing
back to back should be bolted
together.)
16-PERSON
(SRS-721878-x) 15-PERSON
(SRS-601878-x)
QUANTITY
4-PERSON
(BS1-121812-4) 3-PERSON (BS1-121812-3)
GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various pieces to
avoid injury. For sa ety, wear a pair o work gloves when assembling or per orming any maintenance on your cabinet.