TRIBU 07662 Series User manual

BRANCH DINING TABLE DIA 125 CM
ASSEMBLY INSTRUCTIONS
07662-xx-xx
BRDT12503 - 31-07-2017
Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]
Attach the third leg with:
- 2 x T-nut to attach Leg to the Cross (screw 100%)
- 2 x Bolt A to attach the Leg to the Tabletop (screw 30%)
- 1 x Bolt B to attach the Leg to the Square (screw 100 %)
Screw all A bolts 100 % and carefully turn the table upside down.
5
6
All manuals and user guides at all-guidesbox.com
all-guidesbox.com

CONTENT ASSEMBLY INSTRUCTIONS
1 x
Tabletop
4 x
Leg
1 x
Cross
1 x
Square
8 x
Bolt A Long
8 x
Bolt A Short
4 x
Bolt B
8 x
T-Nut + Headless screw
Put the tabletop upside down on a protective cover.
Attach 1 leg with 2 x Bolt A using an Allen key. Screw the bolts 30 %.
Use the correct bolts and don’t use a powertool!
TABLETOP BOLT A
ALUMINIUM LONG
(2 cm)
TEAK LONG
(2 cm)
GRANITE SHORT
(1,2 cm)
Attach a second leg with:
- 2 x T-nut to attach the Leg to the Cross (screw 100%)
- 2 x Bolt A to attach the Leg to the Tabletop (screw 30%)
Attach the Square to both legs with:
- 2 x Bolt B to attach the Square to the Legs (screw 100%)
Attach the third leg with:
- 2 x T-nut to attach Leg to the Cross (screw 100%)
- 2 x Bolt A to attach the Leg to the Tabletop (screw 30%)
- 1 x Bolt B to attach the Leg to the Square (screw 100 %)
1
2
3
4
All manuals and user guides at all-guidesbox.com