TRIBU NODI SOFA User manual

NODI SOFA
BACKREST ADJUSTMENT KIT
NOSOAK01 - 10-05-2021

INTENDED USE
COMPONENTS
4 x
METAL WASHER
2 x
HEIGHT ADJUSTMENT
This adjustment kit allows you to adjust 1 single backrest.
It can not be used for corner backrests.
After installing this adjustment kit the backrests will align better with other single
backrests and/or corner backrests.
If you have a Nodi sofa set we advise to adjust all single backrests.

ASSEMBLY INSTRUCTIONS
Remove the cushions from your sofa.
1

Remove the seat plate of the module that you want to adjust by
unscrewing all COUNTERSUNK SCREWS.
2
Unscrew the 4 FLATHEAD SCREWS that secure the backrest to the frame
and carefully remove the backrest. Underneath each screw you will find a
BUSHING and a WASHER which you won’t need anymore.
3
Washer
Flat head screw
Bushing

Insert the two HEIGHT ADJUSTMENTS, one into each cavity of the
backrest.
4
Reinstall the backrest using 4 x METAL WASHER and 4 x FLAT HEAD SCREW.
5
Metal Washer
Flat head screw

Repeat step 2 - 6 if you want to adjust other backrests.
If all backrests are adjusted you can put the cushions back.
7
Reinstall the seat plate by using 8 - 12 COUNTERSUNK SCREWS.
6

Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]