TRIBU ILLUM 06573 User manual

ILLUM DINING TABLES
ILLUM BAR TABLES
ASSEMBLY INSTRUCTIONS
06573 - 06550 - 06552 - 06554
06552xs - 06554xs
06586 - 06587
ILDT04 - 06-12-2018
Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]
6Place bumpons on the inside of the table frame. Divide as shown below and use the
double sided tape to glue the bumpons to the tableframe.
Then carefully place the ceramic top on the frame.
210x98 - 201x71
18 x Bumpon
150x98
16 x Bumpon
98x98
12 x Bumpon

CONTENT ASSEMBLY INSTRUCTIONS
1 x
Table frame
8 x
Washer
Wood screw 8 x
Bolt
Bumpon4 x
Short leg
4 x
Long leg
or
Put the table frame on top of another table as shown in the picture below.
Use a protective cloth to protect the table frame.
Take 1 x leg, 2 x bolt and 2 x washer. Repeat this for every leg. Screw the leg onto
the table frame in an alternating way. Use long legs if you are assembling a bar table,
short legs if you are assembling a dining table. Note that every leg has an adjustable
glider so you can level the table.
For CERAMIC TOP, skip to step 6.
For TEAK TOP, continue to step 4.
Carefully place the teak top on the table. Do NOT use bumpons.
Fix the teak top using the wood screws.
1
2
3
4
5