TRIBU VISAVIS 01754 User manual

Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]
Assembly instructions
01754
VISAVIS Table 400x99cm
VAVDT03/01 –28/10/2020
MANUAL 2
Once assembled turn the in the correct position.
6

Materials Assembly Instructions
Assemble 2 tables as described in step 1-6 of the assembly instructions of the Vis a Vis table
3m (01753).
1
Place the 2 other table tops onto the supports and between the 2 pre-assembled
table (see step 1) as shown in the picture below.
5
Take the left support EXT and slide it into the left support A and B as shown in the
picture below. Mind that the 6 holes A are directed to the inside of the table.
2
Repeat step 2 for the right support EXT. Mind that the 6 holes A are directed to the inside
of the table.
3
4x Table top
4x leg
4x support for leg
16x dowel 12x bolt C (25mm)
1x left support A
1x right support A
1x left support B
1x right support B
16x bolt B (80mm)
Holes A
Holes A
Take 12 bolts B in order to screw the table tops onto the supports as shown in the picture
below.
6
16x bolt A (80mm)
1x left support EXT
1x right support EXT
Holes A
Holes A
16x washer
Take 3 bolts C and screw them into the holes to connect the supports as shown in the
picture below. Screw them in alternating way.
Repeat this step for each connection of the supports at the inside of the table.
4
Make sure you assembled all the single tables as mentioned in manual 1