TRIBU MOOD 06208 User manual

Tribù nv
Langendijkstraat 5a
3690 Zutendaal
BELGIUM
www.tribu.com
[email protected]
Assembly instructions
06208
MOOD sofa 163 cm
MOS02 –26/10/2015
5Attach the Back part to the seat part using 2 x small washer, 2 x
small nut and an adjustable spanner. Do not forget to fix both
threaded pins.
6Use 5 x screw, 5 x small washer and an Allen key to connect the Back
part to the Seat part on the front side of the chair.

Content Assembly Instructions
1 x Seat
1 x Back
5 x screw
Allen key
14Slide the Back part onto the seat part. The Back part has 2 guiding
pins (A) that fit into a designated slot in the Seat part. The Back
part also has two threaded pins (B) that fit into a hole in the Seat
part. Push the Back part firmly against the Seat part.
Adjustable spanner
Required tools:
2 x small nut
7 x small washer
B
Postion the seat upside down on a
protective surface.
A
3Assemble the back legs with 2 x large nut and
2 x large washer. Screw nut 1 first, than nut 2.
Repeat for the other back leg.
2Assemble the front legs with 2 x large nut and
2 x large washer. Screw nut 1 first, than nut 2.
Repeat for the other front leg.
1
2
8 x large washer
8 x large nut
1
2