TRIBU AMANU 02652 Series User manual

02652-x, 02654-x
AMDT02 - 25-01-2022
Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]
AMANU TABLE
ASSEMBLY INSTRUCTIONS
Place a tile on the table, make sure the hole in the tiles allign with the bumpon on the
table. If these allign the movement of the tile should be limited.
Repeat step 5 for all the other tiles.
5
6
5

CONTENT ASSEMBLY INSTRUCTIONS
2 x
Legs
1 x
Beam
Put the frame upside down inside its own packaging. Insert the legs into the frames
with caution.
Lower the beam into the designated holes of the legs with caution. Use 2x athead
screw + 2x washer to secure the beam to the legs. 1x atheadscrew + 1x washer for
each leg. DON’T USE AN ELECTRIC POWERTOOL.
1
2
Use 4x athead screw + 4x washer to secure the legs to the table top.
2x atheadscrew + 2x washer for each leg. DON’T USE AN ELECTRIC POWERTOOL.
3
Flip the table into it’s upright possition. Make sure the legs don’t touch the oor when turning it
upside down.
1x
Table top 352x98 or 293x98
8 x or 10x
Rectangular tile
2x
Head end tile
6 x
Flathead screw + washer
4