TRIBU VISAVIS 01755 User manual

Tribù nv
Oude Heidestraat 72
3740 Bilzen
BELGIUM
www.tribu.com
[email protected]
Assembly instructions
01755 // 01756 // 01757
VISAVIS Table 500 // 600 // 700x99cm
Once assembled turn the in the correct position.
6VAVDT04 –4/11/2020
MANUAL 2

Materials Assembly Instructions
Assemble 3 tables as described in step 1-6 of the assembly instructions of the Vis a Vis table 1m
(01773).
1
Put the table tops and tables upside down on a protective cover. Align the holes in
the assembled supports with the designated holes on the bottom of the tabletops.
Make sure holes A are pointing to the inside of the table.
4
Take the left support EXT’s and slide them into the left support A and B as shown in
the picture below. Mind that the holes A are directed to the inside of the table.
2
Take 3 bolts C and screw them into the holes to connect the supports as shown in the
picture below. Screw them in alternating way.
Repeat this step for each connection of the supports at the inside of the table.
3
5m : 5x Table top
6m : 6x Table top
7m : 7x Table top
6x leg 6x support for leg
24x dowel
5m : 18x bolt C (25mm)
6m : 24x bolt C (25mm)
7m : 30x bolt C (25mm)
1x left support A
1x right support A
1x left support B
1x right support B
5m : 20x bolt B (80mm)
6m : 24x bolt B (80mm)
7m : 28x bolt B (80mm)
Holes A
Holes A
Secure the assembled supports to the table tops using 80 mm bolts A.
5
24x bolt A (80mm)
5m : 2x left support EXT
2x right support EXT
6m : 3x left support EXT
3x right support EXT
7m : 4x left support EXT
4x right support EXT
Holes A
Holes A
24x washer
Make sure you assembled all the single tables as mentioned in manual 1