Triton RL1600 User manual

Corporate Headquarters
21405 B Street
Long Beach, MS 39560
Phone: [phone]
Fax: [phone]
COPYRIGHT NOTICE
© 2008 Triton.All Rights Reserved. TRITON logo is a
registered trademark of Triton Systems of Delaware.
ModeL rL1600
autoMated teLLer MaCHine
user ManuaL
TDN 07103-00190 Aug 7 2009

ii
ModeL rL1600 user ManuaL
DOCUMENT UPDATES
Jan 19 2009 Original
Mar 12 2009 Editing updates
May 26 2009 Photograph editing updates to Section 1,2,4,Sup A and B
Aug 7 2009 T5 keypad added as option

iii
ModeL rL1600 user ManuaL
notiCes
Copyright © Delaware Capital Formation, Inc., 2007-2008.
aLL rigHts reserved
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced
or transmitted by any means or in any form, without prior consent in writing from Triton Systems of
Delaware, Inc.
The information in this publication has been carefully checked and is believed to be accurate. However,
Triton Systems of Delaware, Inc. assumes no responsibility for any inaccuracies, errors, or omissions
that may be contained in this document. In no event will Triton Systems of Delaware, Inc. be liable for
direct, indirect, special, incidental, or consequential damages resulting from any defect or omission in
this manual, even if advised of the possibility of such damages.
In the interest of continued product development, Triton Systems of Delaware, Inc. reserves the right
to make improvements in its documentation and the products it describes at any time, without notice or
obligation.
tradeMark aCknowLedgeMents
Microsoft Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries. Triton Connect is a trademark of Triton Systems of Delaware, Inc. VISA® is a registered
trademark of VISAof the United States and other countries.

iv
ModeL rL1600 user ManuaL
Contents
seCtion 1 - introduCtion .........................................................................................1
What’sin this Manual....................................................................................................2
Feature highlights / Changes............................................................................................................. 3-4
standard Features .............................................................................................................................. 4-5
seCtion 2 - BasiC operation ....................................................................................7
introduCtion ........................................................................................................................................ 8
Control Panel layout ........................................................................................................................ 8
FunCtion KeyPads ................................................................................................................................ 9
Main KeyPad ........................................................................................................................................ 9
on-sCreen KeyPad oPeration.............................................................................................................. 10
Menu-based oPeration ........................................................................................................................ 11
CustoMer transaCtions....................................................................................................................... 12
VoiCe-enabled transaCtions .............................................................................................................. 14
seCtion 3 - Cassette CLose / CasH repLenisHMent ...............................................15
introduCtion ........................................................................................................................................ 16
disPensing MeChanisMs........................................................................................................................ 16
note Condition .................................................................................................................................... 17
PreParing notes................................................................................................................................... 17
Cassette CLose proCedures..............................................................................................................18
repLenisH Cassette(s)..........................................................................................................19
MiniMeCh ............................................................................................................................................. 19-20
seCtion 4 - generaL MaintenanCe..........................................................................21
introduCtion ........................................................................................................................................ 22
rePlenishing the reCeiPt PaPer........................................................................................................... 22-24
Cleaning the enClosure...................................................................................................................... 25
Cleaning the disPlay........................................................................................................................... 25
Card reader Cleaning ........................................................................................................................ 25

v
ModeL rL1600 user ManuaL
Contents
appendix a - software LiCense agreeMent ..........................................................a-1
appendix B - warranty stateMent ........................................................................B-1
appendix C - eLeCtroniC LoCks..............................................................................C-1
appendix d - MeCHaniCaL LoCks.............................................................................d-1
suppLeMent B - key ManageMent.........................................................................sB-1
suppLeMent a - t7 t5 epp Battery repLaCeMent proCedures.........................sa-1

vi
ModeL rL1600 user ManuaL
tHis page intentionaLLy Left BLank

1
Section 1
introduction

2
Model rl1600 uSer Manual
The User manual describes the operating features of the Model RL1600 series ATM and shows how to
perform the procedures that would typically be performed by the owner or operator personnel.
The manual is divided into the following sections:
Section 1, introduction.Summarizes the basic features of the Model RL1600 series ATM.
Section 2, BaSic operation.Describes the basic operation of the terminal:
 Control Panel Layout.
 Keypads (Function, Main, On-Screen)
 Menu-Based Operation
 Customer Transaction Process
 Voice-Enabled Transactions
Section 3, caSSette cloSe / caSh repleniShMent.Describes the menu functions for cassette close
procedures. Cash replenishment steps for each dispenser and standards are covered as well.
Section 4, General Maintenance.Describes normal preventative and corrective maintenance proce-
dures appropriate for user personnel.
 Replenishing Receipt Paper
 Cleaning the Enclosure/Card Reader
appendix a - Software licenSe aGreeMent / coMpliance StateMentS
appendix B - warranty StateMent
appendix c - electronic coMBination lockS
appendix d - Mechanical coMBination lockS
what’Sin thiS Manual
IMPORTANT: Follow the instructions provided in SUPPLEMENT A of this manual for
replacing the battery for the T7 & T5 PCI-EPP. Failure to follow the explicit instructions will
permanently damage the keypad!
SuppleMent B - t7 t5 key ManaGeMent functionS.
SuppleMent a -t7 t5 Battery replaceMent procedureS

3
introduction
Important features of the RL1600 series ATM are highlighted in the following list:
Highly reliable, state-of-the-art operating system PC platform design. The RL1600 uses Microsoft®
Windows® CE.5.0 operating system with Triton’s X2 technology. Supports Windows le formats for
adding custom logos and advertisements. In addition, it features Triton’s completely custom design
X2 motherboard with integrated modem.
Modular architecture eases troubleshooting and servicing.
feature hiGhliGhtS
Front-access unit accommodates single cassette (MiniMech,)
 -Only one cabinet design, shallow, accommodates the dispenser mechanism offered.
 -Cabinet available in UL 291 Business Hours only. Cash must be removed after hours.
5.7” (145mm) color LCD display.
T7 & T5 PCI-compliant EPP to comply with international encryption standards and Triple DES
compliant.

4
Model rl1600 uSer Manual
ManaGeMent functionS. Enable extensive control and customization of the ATM’s operating
parameters. See “x-Scale/x2 confiGuration Manual”on web site.
paSSword protection.Access to Management Functions and Key Management areas are protected
with passwords.
Mac encryption Support. MessageAuthenticationCode(MAC)dataencryptionprotocol.Provides
increased protection for message trafc to and from the ATM. Triple DES compliant.
pci-coMpliant encryptinG pin pad (epp) entry device Support. Secure EPPdevice encrypts
the customer PIN during a transaction. Triple DES and PCI compliant.
Multi-lanGuaGe Support. Enables the customer to select a preferred language (such as French or
Spanish) for customer screens and receipts.
LED-backlit signage standard (Mid topper attachment).
Bayou Bronze control panel and fascia color.
Graphics-capable 60 mm gravity-fed thermal printer designed for quiet operation. Prints receipts,
coupons, and management reports.
 Mechanical (standard) or electronic combination lock (optional, eld installed).
 Supports remote setup, conguration, and monitoring via TritonConnect™ATMmonitoringsoftware.
Dispenses U.S. and international currency types.
High-capacity electronic journal stores transaction details for later printout and analysis.
 Satises AmericanswithDisabilitiesAct(ADA) specications for height and access; audio transactions
for the visually impaired. Complies with UK accessibility guidelines (DDA) and California access
compliance, Title 24.
Standard featureS
feature hiGhliGhtS
Multi-function, dip-style card reader supports magnetic stripe cards or “smart” cards that conform
to the EMV standard. (215 Standard DIP [US] or IS65 EMV DIP [Canada ONLY])
SupportscommunicationtypesTCP/IP(standard),dial-up(56KbaudTritonUSBmodem - integrated
on motherboard): VSAT (satellite), Radio Pad, and wireless optional.
(Note: For wireless option, please contact your account representative for more information).
Easy to install (small footprint design makes placement easier) and congure terminal parameters
by software.

5
introduction
StatuS MonitorinG.The ATM can periodically transfer status information to the host processor.
In addition, Triton Connect™ remote monitoring software can be used to view the journal, monitor
operation and alarm conditions, update operating parameters, and reset the terminal.
ul 291 BuSineSS hourS Service. Business hours cabinet means currency should be removed from
the dispenser and stored in a safe location when the business is closed to the public.
front-acceSS caBinet. Allows access to the dispensing mechanism and currency cassette from the
control-panel side of the unit.
caSSette and day cloSe reportS.Provide summary information about the number and type of
transactions being performed by the ATM.
electronic Journal.Stores the details of each transaction in solid-state memory. Journal data can
be retrieved, printed, saved to an external storage device, or transferred to a remote Triton Connect™
computer.
ad ScreenS.AnAdscreenisa promotionaloradvertisinggraphicthatisdisplayedontheLCDscreen
during idle periods. Ad screens are downloaded to the terminal by either using an external storage
device (jumpdrive) or a remote Triton Connect™ computer. Text-only (non-graphic) ad screens can
also be displayed.
receipt printer GraphicS.This feature allows informational or promotional graphics to be printed
on customer receipts. Graphics can be loaded from an external storage device or Triton Connect™.
MeSSaGeS.Informational and promotional messages that are displayed to the customer on-screen or
printed on receipts.
couponS. Coupons can be printed by the receipt printer. Prizes may be awarded to customers based
on random and/or withdrawal amount-based transactions. Coupon text can be entered locally or
downloaded along with coupon graphics using Triton Connect™ software.
tranSaction and account type confiGuration. Enables selection of transactions (transfers or
balance inquiries) or accounts (savings or credit card) that will be presented to the customer. Does
not affect availability of checking account withdrawal.
Business
Hours Conguration
140 lbs
63 Kilos Shallow cab MiniMech
mid topper
Weight of the RL1600
(Approximate)

6
Model rl1600 uSer Manual
thiS paGe intentionally left Blank

Section 2
BaSic operation
7

8
Model rl1600 USer ManUal
This section describes the basic operation of the terminal. The following topics are covered:
1. control panel layoUt.Describes the layout of the terminal’s control panel.
2. Keypad operation.Describes the use of the alphanumeric keypads.
3. MenU-BaSed operation.Gives a general overview of the terminal display interface.
4. cUStoMer tranSactionS.Summarizes the actions involved in typical customer transactions. In
addition, the voice-enabled transactions feature is described.
Theuserinterfaceoftheterminalconsistsof theLCDscreen,receiptchute,cardreader,speaker, headphone
jack (visually impaired), and 24 keys on three keypads. The Function keys are arranged in two four-key
groups, one group on either side of the LCD display. The main keypad consists of 10 alphanumeric keys,
two arrow keys and four large control keys, all located in a 16-key group beneath the LCD screen.
The main keypad and control keys have an integral raised Braille symbol to conform to the requirements
of the Americans with Disabilities Act (Figure 2-1).
Figure 2-1. Control panel layout.
introdUction
control panel layoUt
LCD screen
Function
keys
Card
Reader
Receipt
chute
Main
Keypad

9
BaSic operation
The eight (8) keys, arranged in two four-key groups, are called screen function keys. A screen function
key is only active when a corresponding function or menu option is present next to that key. The Function
keys are designated F1 through F8, as shown in Figure 2-2.
Figure 2-2. Function key layout.
The entry of numeric characters via the main keypad is straightforward: simply press the desired key.
However, in certain Management Function screens it may be necessary to enter alphabetic characters, a
procedure that’s available with the On-Screen keypad, explained on next page.
Figure 2-3.
Alphanumeric
keypad.
FUnction KeyS
Main Keypad
1
QZ
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
< >
x
CANCEL
<
CLEAR
O
ENTER
CTRL

10
Model rl1600 USer ManUal
To enter text characters into the dialog boxes that are displayed by the Management Functions, press
the F8 key to display the screen keyboard. Use the keys described below to navigate and enter required
data. (see Figure 2-4)
• TheArrowkeys(< and >), the <8> key - (Up), and the <0> key - (down)navigate the keyboard.
• Pressthe<enter>key to select the highlighted key entry.
• Pressthe<CTRL> key to switch between upper and lower case characters.
• Pressthe<cancel>key to Exit the keyboard.
• Pressthe<clear>key for the Backspace operation.
• Pressthe<1> key to reposition the keyboard to another location on the display.
• Pressthe<2> key to positon the cursor on a new line.
Figure 2-4. On-screen keyboard.
on-Screen Keypad operation

11
BaSic operation
When a screen timeout occurs, a screen is presented which asks the user if more time is needed. If the
user chooses NO, the Customer Welcome screen will be presented. If YES is chosen, the user is returned
to the function that was active prior to the timeout. If the user does not make a selection within an ad-
ditional30-secondcountdownperiod theterminalwill automaticallygoto theCustomerWelcomescreen.
If you do not select a menu choice within 30 seconds the terminal will automatically default to the Cus-
tomerWelcomescreen(abenetofthisfeatureisthatintheeventofapowerinterruptiontheterminal
will automatically begin accepting customer transactions shortly after power is restored).
Figure 2-5. Top menu screen.
Theterminaloperatesasa menudrivensystem.MessagesandmenuoptionspresentedontheLCDdisplay
screen guide the user’s actions. The desired menu option is selected by pressing one of the keys located
to the left and right of the display. For the purpose of security many screens timeout after a preset time
interval, usually 30 seconds. The timeout length may vary depending on the function being performed.
1. Activate the terminal to perform customer transactions by pressing the key next to cUStoMer
tranSactionS.
2. Enter the terminal system management area by pressing the key next to ManageMent FUnctionS.
Note: You will have to enter an appropriate password to view the Management Functions menu.
Ensure all procedures in the Installation Guide have been accomplished. The unit should be off, with the
powercordandcomminucationscableconnected.Powerontheunitbyplacingthepowerswitchonthe
power supply to the on position. Shortly after the unit is turned on, the top menu will be displayed. An
example top menu is shown in Figure 2-5. From the top menu, you can either:
MenU-BaSed operation

12
Model rl1600 USer ManUal
A customer begins a transaction by selecting from the Customer screen options. They insert their ATM
card into the card reader of the terminal. The card must be inserted so that the magnetic stripe can be
scanned by the card reader’s sensor. If the customer inserts the card incorrectly, a warning message will
be displayed, accompanied by several beeps to get their attention.
If there is a problem reading a card, make sure the customer is inserting the card correctly. Most problems
are the result of inserting the card incorrectly.
Once the card has been read in successfully, a surcharge message, if applicable, may be displayed (the
surcharge message may be displayed at the end of the customer’s transaction selection). The customer
mustthenentertheirsecretPersonalIdenticationNumber(PIN)code.OncethePINhasbeenentered,
the transaction type and account are selected, and the desired amount of the transaction, if needed. The
transaction will be processed, typically in a matter of seconds.
Figure 2-6 shows how ATM transactions are handled. If the transaction was processed successfully, the
customer is prompted to retrieve the requested cash (for withdrawal transactions) and/or the applicable
transaction receipt, as needed. If the transaction was declined, a short receipt indicating the problem is
printed.
Figure 2-6. ATM transaction processing.
cUStoMer tranSactionS

13
BaSic operation
TheATMsendsthecustomertransactionrequesttoaprocessor.Aprocessorisanancialintermedi-
ary, such as an IndependentSalesOrganization(ISO),bank,orothernancialinstitutionthatprovides
transaction-processing services for ATMs. The ATM must be set up with a particular processor before
customer transactions can take place.
The processor routes the transaction to the appropriate ATM network. An ATM network is a regionally
ornationallyorganizedclearinghousefornancialtransactions,thatdealsdirectlywiththeappropriate
nancialinstitution,suchasthecustomer’sbankorcreditcardcompany,inordertocompletethetransac-
tion. The processor will select the appropriate ATM network to use based on factors such as the type of
ATM or credit card used, location of the customer’s bank, or other considerations. The transaction may
be transferred between several networks before ultimately reaching the customer’s bank or credit card
company.
TheATMnetworkroutesthetransactiontotheappropriatebankorotherinstitution,conrmssuccessful
completionofthetransaction,andsendsaconrmationmessagebacktotheprocessor.Iftherequestwas
for a cash withdrawal, an Electronic Funds Transfer (EFT) takes place to debit the funds (including any
surcharge fee, if applicable) from the customer’s bank account and credit the funds to the processor’s
bank account.
TheprocessorforwardsaconrmationmessagetotheATM(andanauthorizationtodispensecurrency,
in the case of a cash withdrawal). TheATM dispenses the requested currency, if necessary, and provides
the customer with a printed receipt as a record of the transaction.
The processor credits the merchant’s account for the amount of any cash withdrawals (plus surcharge
fees, if collected), typically by the end of the next business day).

14
Model rl1600 USer ManUal
The terminal provides voice feedback via an integrated output jack, enabling sight-impaired users to
plug in a set of headphones and receive spoken instructions to assist them in using theATM (Figure 2-7).
A raised symbol helps a user locate the headphone jack. The ATM will automatically detect when a
headphone has been plugged into the jack, and will immediately switch into voice mode. Initially, a brief
spoken tutorial will orientate the customer to theATM control panel interface. Once the customer begins
a transaction, spoken prompts will provide feedback and guide the customer through the successful ac-
complishment of the transaction.
Figure 2-7. Headphone jack location.
(Typical)
Voice-enaBled tranSaction