Triton RT2000 (X2) User manual

TDN 07100-00098
THIS AREA FOR SERVICE PROVIDER
CONTACT INFORMATION:
Oct 31 2008
Model RT2000 (X2)
Quick RefeRence Guide

2
MANAGEMENT FUNCTIONS
- Access instRuctions -
1. AtAtM WelcoMe scReen, pRess And hold doWn the <ctRl>
key (loWeR-RiGht coRneR of keypAd), pRess <1> key, then ReleAse
both keys. the pAssWoRd Access pRoMpt is displAyed.
2. enteR pAssWoRd And select <enteR>. the MAnAGeMent functions MAIN MENU is displAyed.
TERMINAL CONFIGURATION REPORT
folloW Access instRuctions to enteR MAnAGeMent functions. select
DIAGNOSTICS > TERMINAL STATUS.
CONFIGURATION SUMMARY: this suMMARy is AcoMpRehensive
RepoRt of cuRRent teRMinAl confiGuRAtion And hARdWARe stAtus
infoRMAtion.
note: itis hiGhly RecoMMended thAt this RepoRt be pRinted And sAved AfteR initiAl setup And WheneveR
chAnGes ARe MAde to the teRMinAls confiGuRAtion.
RESTART / SHUTDOWN TERMINAL
RESTART TERMINAL: this function Reboots the teRMinAl.
folloW Access instRuctions to enteR MAnAGeMent functions. select
SYSTEM PARAMETERS.
SHUTDOWN TERMINAL: this function poWeRs-doWn the teRMinAls
opeRAtinG systeM. When pRoMpted thAt shutdoWn is coMplete, tuRn
on/off sWitch on poWeR supply to <off> position.

3
DIAGNOSTICS
PURGE: this instRucts the dispenseR to ReMove Any notes (jAMs) in
feed pAth.
folloW Access instRuctions to enteR MAnAGeMent functions. select
DIAGNOSTICS > DISPENSER.
TEST DISPENSE: this instRucts the dispenseR to dispense minimum
one note fRoM eAch instAlled cAssette into the Reject cAssette/AReA.
RESET / TEST PRINTER: this
instRucts the pRinteR to Re-
initiAlize And peRfoRM Atest
pRintout.
select DIAGNOSTICS > PRINTER.
pRint lAst X: tovieW/pRint pReviously Audited oR unAudited
RecoRds, use the pRint lAst X option.
JOURNAL FUNCTIONS
folloW Access instRuctions to enteR MAnAGeMent functions. se-
lect JOURNAL.
eXAMple: enteRinG the nuMbeR ‘50’ Will let you vieW the lAst 50 tRAnsActions/events thAt hAve oc-
cuRRed. you MAy pRint to the Receipt pRinteR.
dAy close: this option is used to coMplete dAily bAlAncinG of
the AtM With the pRocessoR. totAls ARe cleARed And sWitched to
the neXt business dAy.
folloW Access instRuctions to enteR MAnAGeMent functions. select
TERMINAL CLOSE FUNCTIONS.
tRiAl close: this option functions like AdAy close eXcept the totAls ARe not cleARed.
CLOSE FUNCTIONS

4
CASSETTE CLOSE FUNCTIONS
(fRoM the fRont displAy)
folloW Access instRuctions to enteR MAnAGeMent functions. select TERMINAL CLOSE functions.
select CASSETTE CLOSE.
select cAssette(s) to close. A check MARk ( √)
identifies Which cAssette(s) ARe selected. pRess <en-
teR>.
AfteR cAssette(s) hAve been ReinseRted in the dis-
penseR, pRess <enteR>.
A close RepoRt is displAyed to be pRinted oR sAved.
this opeRAtion Will Reset the nuMbeR of bills in the
cAssette(s) to zeRo (0). pRess <enteR>.
ReMove And Replenish the selected cAssette(s).
folloW cAssette ReplenishMent pRoceduRes.
plAce selected cAssette(s) IN SERVICE. pRess
<enteR>. note: For tDm-200/250 Dispensers.
enteR cAssette QuAntity (nuMbeR of notes, not
vAlue) foR the selected cAssette(s). pRess <enteR> to
Accept entRy. RepeAt foR eAch selected cAssette.
A tRiAl cAssette close RepoRt AutoMAticAlly is
displAyed to be pRinted oR sAved. pRint And RetAin Acopy
foR stARtinG point RefeRence. pRess <enteR> to RetuRn
to close functions.
**IMPORTANT**
ensuRe the MultipleAMount pARAMeteR MAtches
the denoMinAtion of cuRRency in eAch note cAssette!

5
CASSETTE CLOSE FUNCTIONS
(fRoM the ReAR opeRAtoR seRvice pAnel (touchscReen)



pRess to stARt.


enteR pAssWoRd.
select “cAssette close”.
close cAssette(s) - touch cAs-
sette options on touchpAd until
“AsteRick” AppeARs. select “con-
tinue”.

cAssette close RepoRt AppeARs.
pRint RepoRt. pRess “eXit” When
coMpleted.
*** Cassette Close ***
Cassette A
Last Close Date/Time:
6/4/2007 7:49:39 AM
Start Quantity:
Qty: 200
Amount: $2000.00
Dispensed:
Qty: 50
Amount: $500.00
Remaining:
Qty: 150
Amount: $1500.00

ReMove /Replenish cAssette(s).
pRess “enteR”.
plAce cAssettes “in-seRvice”.
touch cAssette options on touch-
pAd until “AsteRick” AppeARs.
select “continue”.

tRiAl cAssette close RepoRt Ap-
peARs. pRint RepoRt. pRess “eXit”
When coMpleted.

enteR cAssette Qty (eAch).
pRess “ok”.
sele ct “teRMinAl cl ose
functions”.
Select the cassettes to close.
WARNING: Cassette totals will be
reset for the selected cassettes
* Cassette A: $10.00
* Cassette B: $20.00
Continue Exit
Select the cassettes to place in
service.
* Cassette A: $10.00
* Cassette B: $20.00
Continue Exit
Cassette Quantity - Cassette A:
Please enter the number of bills that
are in the cassette (not the value).
1 2 3
456
789
0
< >
CANCEL
CHANGE
OK
200
You may now remove and replenish
the cassettes. Press ENTER when
done.
Enter
*** Trial Cassette Close ***
Cassette A
Last Close Date/Time:
6/4/2007 7:55:39 AM
Start Quantity:
Qty: 200
Amount: $2000.00
Dispensed:
Qty: 0
Amount: $00.00
Remaining:
Qty: 200
Amount: $2000.00

6
REPLENISH CASSETTE(S)
unlock / open vAult
cAbinet dooR. the
dispenseR is Mount-
e d t o AslidinG
tRAy. note: the
t r ay Does not
neeD to be extenDeD
For currency re -
plenishment.
1
6
4
5
ReMove Reject cAssette by GRAspinG the
boX And pullinG fRoM the dispenseR.
3
2
note: the Rt2000 utilizes tdM dispenseRs. cuR-
Rency ReplenishMent foR AcAssette is the sAMe
WhetheR its AsinGle oR duAl-cAssette dispenseR
MechAnisM.
count the nuMbeR of bills thAt ReMAin in
the cAssette, if Any.
count the nuMbeR of bills thAt ARe beinG
Added to the ReMAininG notes.
the totAl of these AMounts Will be en-
teRed in the “enteR cAssette QuAntity”
pRoMpt foR cAssette close pRoceduRe.
plAce cuRRency in the cAssette And sloWly
ReleAse the lAtch AlloWinG the pAckeR
plAte to Move foRWARd AGAinst the notes.
unlock note cAs-
sette With supplied
key. o pen lid.
Move pusheR plAte
t o WA R d s ReAR o f
cAssette And secuRe
in plAce With key
lAtch MechAnisM.
STEP ACTION
STEP ACTION
close lid, lock
cAssette And Rein-
seRt bAck into the
dispenseR. ensuRe
cAssette is fully in-
seRted.
ReMove the note
cAssette(s) b y
GRAspinG the GReen
hAndle And pull
fRoM the dispenseR.
plAce cAssette(s) on AflAt suRfAce.
close, lock, And ReinseRt the Reject cAs-
sette bAck into the dispenseR.
do not Recycle Rejected notes!
unlock And ReMove Any Rejected notes.

7
14
25
36
STEP ACTION
REPLENISH RECEIPT PAPER
STEP ACTION
pull ReleAse pin,
GRAsp hAndle, And
RotAte pRinteR As-
seMbly up to the
seRvice position.
instAll neW pApeR
Roll/ spindle in
bRAcket.
pApeR feeds fRoM
bottom of Roll!
feed end of pApeR
oveR bAR And into
pRinteR tA k e -u p
slot. pRinteR Will
A u t o M At i c A l l y
GRip And pull pApeR
into feed pAth.
note: this pRoceduRe ReQuiRes teRMinAl is poWeRed up.
ReMove spent pA-
peR Roll And spin-
dle fRoM pApeR
bRAcket.
open the ReAR cAb-
inet sleeve dooR.
ifpApeR ReMAins on
Roll, cut oR teAR
pApeR betWeen
Roll And pRinteR.
ReleAse (Open) the blue tension leveR
shoWn. ReMove Any pApeR fRoM the pRinteR/
cutteR AsseMbly.
Move the ten-
sion leveR bAck
to the CLOSED
position. Ro-
tAte doWn the
pRinteR AsseM-
bly.
Open
Closed
note: this position
also allows receipt
access For printing
reports iF using the
rear service panel

8
COMBINATION LOCKS
intRoduction
the secuRity cAbinet cAn be secuRed usinG eitheR AMechAnicAl oR electRonic coMbinAtion lock. this pAGe coveRs
hoW to opeRAte the coMbinAtion of eitheR lock.
opeRAtinG the MechAnicAl lock
unlockinG the lock
theRe ARe tWo MARks on the diAl RinG. the indeX At the top is used foR openinG the lock, the indeX 30 deGRees to
the left is used only When chAnGinG the coMbinAtion.
the diAl should AlWAys be tuRned sloWly And evenly. A Revolution is counted eAch tiMe the selected nuMbeR is
AliGned With the openinG indeX. Donot turn the Dial back to compensate For over-Dialing anumber.if, When diAlinG
the coMbinAtion, Any nuMbeR is tuRned beyond the indeX, the entiRe seQuence Must be RepeAted.
unlockinG 3-nuMbeR coMbinAtions (foR eXAMple, “50-25-50”)
1. tuRn the diAl to the leFt At leAst fouR (4) coMplete tuRns to cleAR the coMbinAtion lock to Accept the
coMbinAtion.
2. usinG the ‘openinG indeX’, tuRn the diAl to the leFt, stoppinG When ‘50’ is AliGned With the openinG indeX,
the Fourth tiMe.
3. tuRn the diAl to the right, stoppinG When ‘25’ is AliGned With the openinG indeX, the thirD tiMe.
4. tuRn the diAl to the leFt, stoppinG When ‘50’ is AliGned With the openinG indeX, the seconD tiMe.
5. tuRn the diAl sloWly to the right until the bolt RetRActs.
opeRAtinG the electRonic lock
the electRonic lock coMbinAtion consists of siX diGits. upon ARRivAl, the coMbinAtion of the lock should AlReAdy
be pReset to 1-2-3-4-5-6.
enteRinG the coMbinAtion
1. enteR the pReset coMbinAtion And check foR pRopeR opeRAtion. AfteR eAch keypRess, the lock Will beep. AfteR
the finAl diGit hAs been enteRed, the lock Will beep twice, And the open peRiod Will beGin.
2. When AvAlid coMbinAtion hAs been enteRed, the opeRAtoR Will hAve AppRoXiMAtely 4 seconDs to open the lock.
3. toopen the lock, tuRn the Dial clockWise.
4. AfteR the lock is opened, the cAbinet dooR MAy be opened.
lockout feAtuRe
the lock includes A‘wrong try penalty’ lockout feAtuRe thAt pRevents entRy fRoM unAuthoRized peRsonnel. this
feAtuRe peRfoRMs As folloWs:
• Entryoffour(4)consEcutivEinvalidcombinationsstartsa5-minutEdElaypEriod.
- led flAshes Red At ten (10) second inteRvAls.
• atthEEndofthEdElaypEriod, two(2)morEconsEcutivEinvalidcombinationswillrEstartanadditional
5-Minute delAy.