TRONXY XY-3 PRO V2 User manual

X Y - 3 P R O V 2
I n s t a l l a t i o n M a n u a l

Please use the machine in a ventilated, dry, clean and flat environment.
Please check if the all the items are included in the packing list before
installing the printer . If you have any questions, please contact customer
service.
Part of the accessories are consumable, the warranty time is different.
Turn off the power in the urgent situation.
The machine contains high speed moving parts and high temperature
parts. Children are not allowed to use the machine without permission.
Do not refit or disassemble the core parts of the machine without permission.
Relevant information is stored in SD card, please check.
ATTENTION
Note : Please make sure the voltage is consistent with the local voltage before
printing. If not,please adjust it(110V-220V).

DIRECTORY
1. MACHINE PARAMETERS 1
2
2. MACHINE STRUCTURE
3. PACKING LIST 3
6. STRUCTURE DEBUG 9
5. WIRING DIAGRAM 7
4. INSTALLATION
4
1.Installation frame
2.Install the print head, filament holder and lattice glass 5
8. CURA INSTALLATION STEPS 15
9. FAILURE CAUSE ANALYSIS 18
7. MENU LIST
11
1.Auto leveling
2.Load and unload filaments 12
10
3.Print test 14

1
1MACHINE PARAMETERS
Print parameters
Print size :
Print accuracy :
Print principle :
Nozzle size :
Nozzle quantity :
Print speed :
Position accuracy :
Filaments support :
300*300*400mm
0.1-0.3mm
FDM(fused deposition molding)
0.4mm
1
20-150mm/s(advise 60mm/s)
X/Y -0.00625mm, Z - 0.00125mm
PLA, ABS, PETG, TPU····
Temp parameters
Print environment : 8-40℃
Nozzle temp : 275℃(MAX)
AC 110/220V 50/60Hz
Power supply
DC 24V/360W
Software
Slicer : Cura, Simplify3D
Input format :
Output format :
Connection :
.stl, .obj
.gcode
TF card, USB cable
Machine parameters
Machine size : 500*495*790mm
Package size :
Machine weight :
720*560*215mm
≈15.5kg
1

2
2MACHINE STRUCTURE
1
2
2
3
4
5
6 7 8
10
12
11
13
14
16
1718
9
15
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Filament holder
FPC cord
Upper frame
Print head parts
Hot bed
Leveling nut
Touch screen
TF card slot and USB socket
Power switch and power cord socket
X axis belt adjuster
Filament sensor switch
Z axis synchronous belt
X axis motor
Screw
Adapter board wiring port
Z axis motor
Y axis belt adjuster
Coupling

3
3PACKING LIST
01 Upper bracket 02 Base 04 Filament holder
05 Clip
06
HM4*10 8PCS
07 Power line 08 USB cable
09 Reader and TF card 10 Filament(Random Color) 11 Tie 12 Shovel
13 T-shaped hexagon wrench 14 Slotted screwdriver 15 Wrench 16 Allen wrench
18 Manual
Before installing the machine, please
che c k whether the accessories are
c o m p l e t e . I f t h e a c c e s s o r i e s a r e
mi s si n g, p l ea s e co n ta c t cu s to me r
service in time for processing.
3
17
Lattice glass
03 Print head

4
4INSTALLATION
01 Upper bracket 02 Base 17 M4*10 10PCS 13 T-shaped hexagon wrench
1
1.Installation frame
4
2
17 17
01
02

2.Install the print head, filament holder and lattice glass
5
03 Print head 05 Lattice glass 04 Filament holder 06 Clip 13 T-shaped hexagon wrench

Use clamps to fix the lattice glass on the hot bed.
06
05
04
6

5
5WIRING DIAGRAM
Filament detector
TF card and USB cable slot and
Power switch and power cord slot
Right Z motor line
Left Z motor line
Adapter board wiring port and
power 110v-220v switch
Note: Please make sure the voltage is
consistent with the local voltage before
printing.
If not, please adjust it (110V-220V）
7

Precautions for FPC cord
If you try to unplug the FPC cord at , please pay attention to
the pulling direction, as shown in the figure below:
8
12
1
3
1 2
Toggle the black buckle
Steps to insert FPC cord
Insert PFC Cord
2
3
1
2 3

6
6STRUCTURE DEBUG
If the machine structure is loose during transportation, it can be solved by adjusting
the eccentric nut.As shown in the figure below (eccentric nut in red circle), turn the nut
with a wrench to adjust the tightness of the pulley (the pulley should not be adjusted
too tight to avoid smooth operation).
If the structure is loose in other places,
you can tighten the screws directly.
Befo r e d e buggi n g , m a ke su r e t he
machine structure is in a stable and
smooth state. You can slide the print
head and platform module by hand to
ens u r e sm o o t h a nd st a b l e sli d i n g
before leveling printing.
9

7MENU LIST
10
1 2 1
3
1 2 3 4
5 6
1
2
3
4
5
6
1 2
1
2
3
2

1.Auto leveling
11
1
2
3
4
5
6
1
2
3
4
5
6
Select tool options
Click on leveling, select auto
If the absolute value of the difference is greater than 0.8, adjust the screw and do it again.
Return to the menu page, select "Z offset”
According to the actual situation, use "10mm", "1mm", "0.1mm" to adjust the distance between
the nozzle and the platform, and adjust it to the thickness of A4 paper.
Finally click “Confirm".
1
2

2.Load and unload filaments
1）Load filaments
In order to successfully complete
the loading, the filament needs to
p e r f o r m s o m e n e c e s s a r y
operations, as shown in the figure
below.
Straighten Filament Cut the filament
to a 45° angle
45°
12

!The print head must be raised before preheating to
avoid scalding the platform.
Caution
2）Extruded filament and unload filament
13
After waiting for temperature
up to 18 0 ℃ , f i l ame n t g o
th r o u gh fro m t he filam e n t
detection, extruder and feed
pipe to the nozzle until the
filaments are squeezed.
23/199
23/0
23/0
23/0
1.Preheat nozzle 2.Extruded filament and
unload filament
1:
Extruded filament
2:
Unload filament
180/210
1 2

Insert the SD card with the reverse side up
3.Print test
14
Click to print Start printing
Select test file
(20mm calibration cube.gcode)
Nozzle Filament
Nozzle
Filament
Proper nozzle height
Good extrusion and adhesion
Nozzle
Filament
2 1
Possible situations when extruding the filament
The distance between the hot bed
and the nozzle is too close, you need
to adjust the Z compensation, press
the in the figure to arrow 1
compensate the difference.
The distance between the hot bed
and the nozzle is too far, you need to
adjust the Z compensation, press the
arrow 2 in the figure to compensate
the difference.

8CURA INSTALLATION STEPS
1.
Set the model according to the fiure below2.
1
2
3
Settings Printer Add printer
1 2 3
Install "Ultimaker_Cura-4.8.0-amd64", double-click to install
thesoftware, follow the prompts to complete the installation steps.
15

4
56
Add a non-networked printer
4Select Tronxy XY-3 5
Change the maximum print size of the machine Click “Next”
9
7
Enter Tronxy XY-3 PRO v2
6Click "Add” 7
8
8
9
16

Modify the parameters according to the diagram, and adjust the specific
parameters according to the model characteristics.
17