Turnstone Bivi Trunk User manual

bivi trunk
& half round table
Assembly Instructions

bivi trunk
hanging
brackets (2)
trunk
thumb screws (4)
(a)
(b)
time needed
tools needed
assembly video
Hang
brackets.
STEP
1• Remove brackets
from trunk.
• Place the two hanging
brackets into the upper
leg slot (a) and swing into
position (b).
really
easy
a little
more difficult
assemble time:
5 minutes
myturnstone.com/bivi/instructions
brackets (4)

For assembly video go to myturnstone.com/bivi/instructions
Hang
trunk.
STEP
2
• Pick up the bivi trunk (one person at each end) and place the bottom of
the storage unit on top of the edges of the hanging brackets.
• Next have one person hold the front of the storage unit in place while the
other person goes under the workstation to secure the unit in place with
two thumb screws and two brackets per hanging bracket.
View from underneath.

brackets (2)
knobs (2)hooks (2)
half round worksurface
thumb screws (4)
time needed
tools needed bivi half round table
assembly video
myturnstone.com/bivi/instructions
assemble time:
5 minutes
really
easy
a little
more difficult
half round worksurface
not allowed with 48” or 60”
bivi single team table

(a)
(b)
(a)
Hook
Knob
For assembly video go to myturnstone.com/bivi/instructions
Hang
brackets.
• Place two brackets into the
upper leg slot and swing
down (a).
• Move brackets to outer
ends of the slot (b).
STEP
1
Tighten knob.
• Tighten knob (a).
• Make sure that the hook goes over
bottom horizontal leg.
STEP
2

(a)
(b)
thumb screw
Place half
round
• Place half round worksurface on
brackets (a).
• Make sure the support brace on the
underside of the worksurface hooks
into the brackets as shown (b).
STEP
3
Tighten
thumb
• Line up the hole in the
brackets with threaded
insert on the bottom of the
worksurface.
• Secure the half round
worksurface to the
brackets using the
thumb screws.
STEP
4
View from underneath.
worksurface. screws.

Visit myturnstone.com to see more spots.

For more information and assembly instruction videos visit myturnstone.com/bivi/instructions
All rights reserved. ©2010 Steelcase Inc. Printed in the U.S.A. on recycled paper. Data subject to change. Trademarks used herein are the property of Steelcase Inc.
Some products and services may not be available in all countries. Your Turnstone representative can provide you with details.
For more information, call Turnstone Customer Service at 1-877-473-1108 or visit us online at myturnstone.com.
ad-stock ID 10-0003124. bivi half round table top & bivi trunk: 11/10
engineering document 939500451 Rev F.