U-Line RUBBERMAID H-2060 User manual

PAGE 1 OF 5 0822 IH-2060
H-2060
RUBBERMAID® SERVICE
CART WITH CABINET
1-800-295-5510
uline.com
PARTS
TOOLS NEEDED
Phillips
Screwdriver
Rubber MalletWrench
PARTS
#DESCRIPTION QTY.
1Handle 2
2Top Shelf 1
3Back Panel 1
4Upright 8
5Center Shelf 1
6Side Panel 2
7Base 1
8 Left Drawer Guide 1
9 Right Drawer Guide 1
10 Drawer 1
11 Front Panel with Doors 1
12 Caster 4
13 Lock Cylinder Bolt 1
14 Cam 1
15 Lock Cylinder Nut 1
16 Lock Cylinder 1
17 Key 1
18 Caster Mount 4
19 Short Phillips Head Screw 4
20 Long Phillips Head Screw 4
1
2
3
4
5
6
7
8
10
6
9
11
13 18
12
14 19
15
20
16
17

PAGE 2 OF 5 0822 IH-2060
ASSEMBLY
1. Use rubber mallet to tap caster mounts into
openings on underside of base, then tap casters
into caster mounts. (See Figures 1-2)
Figure 1
Figure 2
2. Flip base onto casters. (See Figure 3)
Figure 3
3. Tap uprights onto base using rubber mallet.
(See Figure 4)
Figure 4
4. Slide side panel into openings on uprights located
on short side of base. Repeat for remaining side.
(See Figure 5)
Figure 5

PAGE 3 OF 5 0822 IH-2060
ASSEMBLY CONTINUED
5. Insert front panel with doors into openings on
uprights on long side of base. Insert back panel into
openings on uprights located at back of base.
(See Figure 6)
H
Figure 6
6. Insert lock cylinder into front of right door on front
panel. Use wrench to secure with lock cylinder nut.
Add cam and use Phillips screwdriver to secure with
lock cylinder bolt. (See Figure 7)
3
A
Figure 7
Cam
7. Connect center shelf to uprights using rubber mallet.
(See Figure 8)
Figure 8
8. Tap uprights onto center shelf using rubber mallet.
(See Figure 9)
Figure 9
Lock
Cylinder

PAGE 4 OF 5 0822 IH-2060
ASSEMBLY CONTINUED
9. Insert handles into holes in top shelf and tap into
place with rubber mallet. (See Figure 10)
Figure 10
10. Flip top shelf with handles over and secure handles
to underside of top shelf with long Phillips head
screws. (See Figure 11)
F i g u re 11
11. Connect top shelf to uprights using rubber mallet.
(See Figure 12)
Figure 12
12. Attach drawer guides into underside of top shelf.
Secure with short Phillips head screws. (See Figure 13)
NOTE: Notches on drawer guides should face
each other.
L
Figure 13

PAGE 5 OF 5 0822 IH-2060
ASSEMBLY CONTINUED
13. Slide drawer into guides to connect. (See Figure 14)
Figure 14
1
-800-295-551
0
uline.com