Ublox EVK-NINA-W13 User manual

Quick Start EVK-NINA-W13
To download the s-center evaluation soft-
ware, an internet connection is required.
Supported Windows operating systems:
Vista, 7, 8, and 10.
1. Download the s-center software.
2. Run the s-center.exe file and follow
the installer instructions.
3. When the installation is complete, you
will find the s-center menu under the
Windows Start button,
All Programs > u-blox
4. In the s-center menu, you will find the
s-center application, user guide and
uninstall options.
UBX-17046097 - R01
1. Overview 2. Software installation
NINA-W13 module
Reset button
U.FL connector
USB connector
UART indication
LEDs
RGB LED

Download the EVK-NINA-W13 software
(and documentation) from
www.u-blox.com/evk-downloads
1. For EVK variants having an external
antenna, attach the antenna to the
antenna cable and connect to the U.FL
connector.
2. Connect the EVK-NINA-W13 evalua-
tion board to your PC using the included
USB cable.
3. Verify whether the USB drivers are
installed successfully.
NOTE: Refer to the EVK-NINA-W13 User
Guide in case the drivers are not installed
automatically.
4. Download the latest software to the
NINA-W13 module using the s-center.
3. Driver installation
The EVK-NINA-W13 includes a USB cable
for communication and powering the
evaluation board.
EVK-NINA-W131 includes an external an-
tenna and an antenna cable to connect
to the U.FL connector; these accessories
are not included in the EVK-NINA-W132.
Refer to the EVK-NINA-W13 User Guide
for a comprehensive description of the
evaluation kit features and functionali-
ties.
4. Interfaces
For more information regarding the
EVK-NINA-W13, contact your nearest
u-blox support:
www.u-blox.com/contact-support
5. More information
UBX-17046097 - R01 Copyright © 2017, u-blox AG