Uplift Desk MoPac Base STR034 User manual

©2022 UPLIFT Desk®. All Rights Reserved
®
MoPac Base
STR034

Thank you for choosing UPLIFT Desk.

© UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com 3
Safety and Warnings
WARNING! Read all instructions before assembly. Failure to assemble or operate properly may result in
damage or personal injury. Retain this manual for future reference.
WARNING! To prevent tipping, store the heaviest items towards the bottom.
WARNING! Do not stack more than four MoPac Cabinet units vertically or one MoPac Cabinet on one
MoPac Wardrobe.
WARNING! Ensure the furniture is unloaded of contents before moving.
WARNING! Keep all hardware and parts out of reach of children.
WARNING! Do not climb on or allow children to climb on this furniture.
!
!
!
!
!
!
!
WARNING! If stacking cabinets or stacking a single cabinet on a wardrobe, use the MoPac Security
Straps to prevent stacked cabinets from tipping and causing damage, injury, or death. See installation
instructions for the security straps included with each MoPac Cabinet and MoPac Wardrobe.

© UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com
4
Legs
(qty 2 )
M6x20 Flat head Screws
(qty 4)
Attachment Plate
(qty 2)
Crossbar
(qty 2)
PACKAGE CONTENTS
M6x12 Pan head Screws
(qty 4)
4mm Allen Wrench
MoPac Stacking Brackets
The MoPac Base is compatible with both the MoPac Cabinet and the MoPac Wardrobe. The illustra-
tions used in these instructions show the attachment of the Base to the MoPac Cabinet, but the steps
for attaching the Base to the MoPac Wardrobe are identical.
M6 Washers
(qty 4)

© UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com 5
ASSEMBLY INSTRUCTIONS
Step 1
A. Place all parts on a clean and smooth surface such as a rug or carpet to avoid scratches.
B. Remove all packaging materials, including box straps, before beginning the assembly process.
C. With assistance, turn the cabinet or the wardrobe on its back on a at, clean surface such as a carpet or
blanket.
D. Remove leveling glides from the bottom if they had been previously installed.
Step 2
A. Align one of the Attachment Plates with the left or right edge of the cabinet or wardrobe in the orienta-
tion shown.
B. Insert two of the M6x20 Flat head Screws through the Attachment Plate where shown and into the thread-
ed inserts along the bottom panel of the cabinet or wardrobe.
C. Once both screws are started, tighten them with the 4mm Allen Wrench. Be careful not to overtighten the
screws to avoid stripping out the threaded inserts.
D. Repeat Step 2 with the other Attachment Plate.
DETAIL B
SCALE 1 : 2
DETAIL B
SCALE 1 : 2

© UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com
6
Step 3
A. Take the Crossbars and slide them over the tube extensions on the side of one of the Legs. Ensure the
parts are oriented as shown so that the large hole found along the side of each Crossbar aligns with the
threaded holes in the Legs.
B. Slide the tube extensions of the other Leg into the opposite ends of the Crossbars.
C. Slide the assembly of the Crossbars and Legs over the Attachment Plates as shown so that the tabs on the
Attachment Plates are located inside of the Crossbars and Legs assembly.
DETAIL C
SCALE 1 : 2
Ensure holes on the Crossbar
align with the holes on the Legs.

© UPLIFT Desk • 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com 7
Step 4
A. With assistance, return the cabinet or wardrobe to an upright position and place it in its nal location. Be
careful to lift the unit to move it. Do NOT drag the unit along the oor as doing so may damage the unit
and/or your oor.
B. Rotate the leveling glides to level the cabinet or wardrobe if the oor is uneven.
DETAIL D
SCALE 1 : 1
DETAIL D
SCALE 1 : 1
Step 3 Continued
D. With the four M6 Washers, loosely insert the M6x12 Pan head Screws through the holes in the Attachment
Plate tabs and Crossbars and into the threaded holes in the Legs.
E. Once all four screws are started, tighten them using the provided Allen Wrench.
DETAIL C
SCALE 1 : 2
DETAIL C
SCALE 1 : 2

800-349-3839
512-614-3152
[email protected]
upliftdesk.com
Work Better. Live Healthier
Copyright Notice: This guide is a component of the UPLIFT Desk™. This guide is a part of the scope of delivery, even if the item is resold. This guide
is also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published
form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.
©
SAVE THESE INSTRUCTIONS
Study this manual carefully. If this desk is sold, please provide this
manual to the buyer, installers, or support personnel operating the product.
®
AI-STR034-1.0