In
case
of
any
query
/issue
with
the
product
please
reach
out
to
us
at
[email protected]INSTALLATION INSTRUCTIONS
WARRANTY
1. Switch off the power.
2. Cut the appropriate size above on the ceiling, put the rubber plug in hole, fix the
bracket on the ceiling with screw solidly. (picture 1)
3. Connect (110-220V) in a coorect way. (picture 2)
4. Install the lamp body into bracket and ghten the screw safely and solidly. (picture 3)
5. Switch on the power if above steps are done properly without any mistakes.
• This product is warranted from manufacturing defect only.
• The warranty is valid for 2 years from the date of purchase.
• The warranty does not apply to damage caused by incorrect installaon or abnormal
wear and tear.
• The company gives no warranty against damage to any surface due to incorrect removal
and installaon of the product
