V-TAC VT-8061 User manual

INSTALLATION INSTRUCTION
LED CEILING DOME LIGHT
LED Chip: AC220 – 240V, 50/60 Hz
WEEE Number: 80133970
Thank you for selecng and buying V-TAC LED Daylight Sensor. V-TAC will serve you the best. Please
read these instrucons carefully before starng the installaon and keep this manual handy for
future reference. If you have any other query, please contact our dealer or local vendor from whom
you have purchased the product. They are trained and ready to serve you at the best.
• This ceiling lighng fixture is with LED diode, which has technology advantage, energy savings, and
environmental protecon, long life span, saving electricity cost and almost no maintenance me
and cost needed.
• It has 100% efficiency and brighter than any other old fixtures.
• No maintenance, easy to install, high efficiency, low electricity, power saving, long life span,
low temperature.
• Lighng installaon should not be covered. Leave some spaced around the fixture
for venlaon.
• Risk of shock, hence disconnect at fuse or circuit breaker before installaon or servicing.
• Risk of fire, supply conductors (power wires) conneng fixture must be rated
minimmum 90°C. If uncertain, consult electrician.
• Turn off the power before inspecon, installaon or removal.
• Please do not exceed the rated voltage or waage.
!WARNING
PRODUCT FEATURES
NOTES
INTRODUCTION

• This product is warranted from manufacturing defect only.
• The warranty is valid for 2 years from the date of purchase.
• The warranty does not apply to damage caused by incorrect installaon or abnormal
wear and tear.
• The company gives no warranty against damage to any surface due to incorrect removal
and installaon of the product.
• NOTE: Although easy to fit, this lamp requires wiring to the main and for safety should
only be fied by a qualified electrician.
• Having issued this warning, the company accepts no responsibility for issues arising for
any failures to comply with these clear instrucons.
• The company will not accept any responsibility for any other issues arising from improper
use of fing of this product as these maers are beyond our control.
WARNING
WARRANTY
INSTALLATION INSTRUCTIONS
! WARNING
• Install only by cerfiedelectrician.
• The light works on AC 220 – 240V.
• Proper groundingshouldbe ensuredthroughoutinstallaon.
• The lighngshouldbe locatedin dry areas.
In case of any query /issue with the product please reach out to us at [email protected]