V-TAC VT-7522 User manual

WEEE Number: 80133970
INSTALLATION INSTRUCTION
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, risk of electric
shock.
TECHNICAL DATA
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future refer-
ence. If you have any another query, please contact our dealer or local vendor from whom you
have purchased the product. They are trained and ready to serve you at the best. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the
product. This product is warranted for manufacturing defects only.
WARNING!
1. Please make sure to turn off the power before
starting the installation
2. The light source of this luminaire is not replaceable;
when the light source reaches its end of life the whole
luminaire shall be replaced.
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.
TABLE LAMP
Model VT-7522
Wa�s 2W
Lumens 200LM
Beam Angle 180°
Cable Length 1 Meter
Adapter Output DC:5V, 1A~2A
Material Aluminium
Dimension 78.5x386mm
Ba�ery Capacity 4400mA
Charging Time 6-8 Hours
Working Time 8-10 Hours
Touch Dimming Level 10~100%
2
YEARS
WARRANTY
*
IP54
RATING

Rechargeable
Table Lamp (1PC)
Charging Base
(1PC)
Instruction
Manual (1PC)
PACKAGE CONTENT
OPERATION GUIDE
1. Connect the charging base into adapter[not included]
2. Connect the adapter[not included] into power source
2. Connect the charging base into the table lamp
3. Tap on the button at the top of lamp to switch on/off the lamp
4. For Dimming function - Make sure the light is ON, tap on the touch button and hold for the light to
increase the brightness. When turning on the lamp next time, the light brightness level will be the same as
the last setting.
COLOR LED INDICATOR
1. RED COLOR INDICATOR - Charging is in progress.
2. GREEN COLOR INDICATOR - The battery is full charge
OPERATION CAUTIONS:
1. Please do not put the lamp on the high-temperature
surfaces, and do not use it in flammable or humid
environment, to avoid the breakdown, short circuit etc.
2. The adapter must be under the specialized range.
3. Please ensure to place the lamp on a steady base only.
MAINTENANCE
1. Please clean the lamp once in every two months to keep it
smooth and bright.
2. Use cleaning cloth and water to clean the dust
3. For filthy marks, please use cleaning cloth and soapsuds.
4. Please do not clean the lamp by high-volatility and
high-corrosive liquid which can lead to discoloring or
damaging the lamp.
4
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [e-mail]
MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B