Valor Fires 820 Longlite Instructions for use

© Baxi Heating U.K. Limited 2010.
5133239-02
Model 820
Electric Heater
Fitted with one of the following fascia.
Blenheim or Seattle
GC No. EF-032-33
Important: Please keep your guide in a safe place for future reference.
INSTALLER AND OWNER GUIDE
This guide is intended to help you
install and care for your Valor Fires
electric heater. Please read carefully
before installing and using your
heater. However, if further
information is required, our
Valor Fires Technical Helpline will
be pleased to help.
Telephone [phone] (National
call rates apply in the United
Kingdom).
In the Republic of Ireland
Telephone [phone].

Baxi Heating U.K. Limited 2010.
All rights reserved. No part of this publication may be reproduced in any material form
(including photocopying), stored in any medium by electronic means (including in any
retrieval system or database) or transmitted, in any form or by any means, whether
electronic, mechanical, recording or otherwise, without the prior written permission of
the copyright owner.
Applications for the copyright owner's permission to reproduce any part of this
publication should be made, giving details of the proposed use, to the following
address: The Company Secretary, Baxi Heating UK Limited, The Wyvern Business
Park, Stanier Way, Derby, DE21 6BF.
Warning: Any person who does any unauthorised act in relation to a copyright work
may be liable to criminal prosecution and civil claims for damages.
CUSTOMER CARE
Thank you for choosing Valor Fires
All Valor Fires heaters are designed to meet the most stringent quality, performance
and safety requirements to provide our customers with many years of trouble free
service. This guide aims to improve your understanding and appreciation of your new
Valor Fires heater, by providing simple and informative instructions to enable you to
install it and to ensure that you benefit from the excellent performance and features it
has to offer.
If you require further assistance, the Valor Fires Technical Helpline will be pleased
to help.
Please telephone [phone] (local rates apply in the United Kingdom). In the
Republic of Ireland please telephone [phone].
Valor Fires, Erdington, Birmingham B24 9QP
www.firesandstoves.co.uk
Because our policy is one of constant development and improvement, details may vary slightly from
those given in this publication.
Page 2
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

Safety First.
Valor Fires heaters are CE Approved and designed to meet the appropriate British
Standards and Safety Marks.
Quality and Excellence.
All Valor Fires heaters are manufactured to the highest standards of quality and
excellence and are manufactured under a BS EN ISO 9001 quality system accepted
by the British Standards Institute.
1. HANDLING AND UNPACKING
Before continuing any further with the installation of this heater please read the
following:
Important safety instructions.
The approximate lifting weights (kg) of the heater parts are listed below:
Model Heat engine Firefront Fascia Spacer* Fuel effect
Blenheim 5.44 4.58 0.63 1.3 0.72
Seattle 5.44 0.91 0.63 1.3 0.9
* An optional spacer frame kit is obtainable either from the your heater supplier or
direct from Valor Fires Sales. The kit is a 75mm (3 inch) spacer kit (Kit number
05801T1).
One person should be sufficient to lift the heater. If for any reason this weight is
considered too heavy then obtain assistance.
When lifting always keep your back straight. Bend your legs and not your back.
Avoid twisting at the waist. It is better to reposition your feet.
Avoid upper body/top heavy bending. Always bend from the knees rather than the
waist. Do not lean forward or sideways whilst handling the heater.
Always grip with the palm of the hand. Do not use the tips of fingers for support.
Always keep the heater as close to the body as possible. This will minimise the
cantilever action.
Use gloves to provide additional grip.
Always use assistance if required.
Page 3
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

2. SAFETY
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Always
 Always install the heater in accordance with this guide. If in doubt obtain
expert advice.
 Always make sure the electrical socket is accessible and located adjacent to, but
not above the heater.
 Always disconnect the heater from the electrical supply before carrying out
cleaning or maintenance.
 Always make sure the heater is firmly secured to prevent it from being tipped
over.
 Always use a fireguard when young children, infirm persons and pet animals can
come into contact with the heater.
 Always use genuine Valor Fires spare parts.
Never
 Never leave children unsupervised in a room where the heater is ON and
unguarded.
 Never obstruct or cover the fan outlet or force items into heater openings.
 Never install or use the heater anywhere where water is in use, i.e.
Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.
 Never use aerosols or steam cleaners on or around the heater.
 Never route the electric supply cable under carpet etc.
 Never install the heater close to curtains or combustible materials.
 Never use the heater to dry clothes etc.
 Never sit or stand on the heater.
Never use the heater with a timer switch or similar device.
Important electrical safety.
The heater must not be located in front of or under an electrical socket; the socket
must always be accessible in order to disconnect the heater from the electrical supply
for maintenance and cleaning.
Page 4
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut
out, this appliance must not be supplied through an external switching device, such
as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Important! This heater must be earthed.
 The heater is supplied with a 3 pin 13 Amp fused re-wireable plug with 1mm² 3
core cable.
 The wires in the cable are coloured in accordance with the following code: -
Live = Brown
Neutral = Blue
Earth = Green / Yellow
 The electric cable must be safely routed from the heater to an electrical socket.
If the electric cable is damaged, to avoid a hazard it must be replaced by a Valor
Fires authorised service agent, or similarly qualified person (See the last page of this
guide for useful telephone numbers).
All external wiring between the heater and the electrical supply shall comply with
current IEE regulations. Extension leads should not be used.
Page 5
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

3. FITTING THE HEATER
The installation of this heater requires a reasonable level of DIY skills.
Please read this guide thoroughly before commencing installation and if in
doubt, seek help from a competent person.
Important: Before continuing with the installation of this heater please ensure
that you have completed the information on the last page of this guide.
Do I need any tools?
1. Depending upon the chosen method of installation you may need the following
screwdrivers: -
 A Pozidrive / Phillips / cross head. This should have a number 2 size tip.
 A Flat end.
2. If drilling into brickwork you will need a power drill (preferably with hammer action)
and appropriate size drill bit for the wall plugs supplied.
Where can I fit the heater?
This heater can be fitted into fireplaces or surrounds where the following dimensions
are available.
Width 400mm - 450 mm (15.35 inches - 17.72 inches)
Height 555mm - 590 mm (21.9 inches - 23.2 inches)
Depth At least 75mm (At least 3 inches)
An optional spacer frame kit is obtainable either from the your heater supplier or
direct from Valor Fires Sales. The kit is a 75mm (3 inch) spacer kit (Kit number
05801T1).
Moving the cable guide.
At the base of the heater you will find an electric cable which runs through a
rectangular plastic cable guide. As supplied the cable guide is fitted into the
rectangular cut-out on the right side of the heater. If required, the cable guide can be
removed and put in the rectangular slot in the centre or left hand side of the heater.
For removal and fitting please see the following sections.
Removing the cable guide
1. Before removing the cable guide please note that the wider part of the cable guide
is on the outer edge of the base (See figure 1- Item 1).
2. To remove the cable guide push and lift the tab on the bottom. The bottom of the
cable guide will open (See figure 1- Item 2).
3. Lift the electric cable clear of the cable guide.
Page 6
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

4. Hold the bottom of the cable guide close to the heater then gently pull the cable
guide away from the rectangular slot (See figure 1- Item 3).
Fitting the cable guide.
When fitting the cable guide please remember that the wider part of the cable guide
has to be fitted against the outer edge of the base (See figure 1- Item 1).
1. Gently pinch the sides of the cable guide (See figure 1 - Item 4) and push the
cable guide into the required rectangular slot.
2. Place the electrical cable into the guide and close the top of the cable guide.
Removing the fascia
1. Very strong magnets attach the fascia to the heater.
Support the rear of the heater and gently pull the fascia
forward (See figure 2).
2. Keep the fascia in a safe place while installing the heater.
Page 7
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 1. Removing and positioning the cable guide.
Item 1
Item 2
Item 3
Item 4
Figure 2. Removing the
fascia.

Heater fixing.
All fixings supplied with the heater have been identified in figure 3.
Page 8
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 3. Contents. Fascia not shown (Items are not to scale)
Contents Quantity (Illustrations are not to scale)
Heater 1
Wall plug 5
Wood screw 4
Eye screw 1
Steel wire 1
No.8 x 3/8 Screw 4
M4 x 25mm Screw 2
Washer 2
Diffuser 1
Control Knob 1

Fitting the Control Knob.
The control knob is supplied separately with
the accessory pack. Fit the control knob
before continuing with the heater
installation. To assemble the control knob to
the control spindle, firstly line up the ‘D’
profile on the underside of the control knob
to the ‘D’ profile on the spindle (both flats
should line up). Place the control knob onto
the spindle and gently push until the control
knob is fully located.
The heater must be fixed into position to prevent it from being tipped over
The following fixing options are available:
 Screw Fixing.
 Wire Fixing.
 Spacer Frame*.
* An optional spacer frame kit is obtainable either from the your heater supplier or
direct from Valor Fires Sales. The kit is a 75mm (3 inch) spacer kit (Kit number
05801T1).
If fitting the heater into a fireplace or surround opening, try the heater in the opening
to ensure that it will fit.
If fitting the heater onto a decorative hearth surface such as marble or tile it is
advisable to protect the hearth surface. Do not drag the heater across the surface of
the hearth as this may scratch the hearth surface.
Method A - Screw fixing.
Note - If fixing to marble it is recommended that
Method B - ‘Wire fixing’ is used. Drilling marble
without the correct tools and experience may
result in the marble cracking.
1. Place the heater into the fireplace or surround
opening. Make sure that the heater is in the
middle of the surround or fireplace.
2. There are two slotted holes in the top of the
heater (See figure 5). Mark through the slotted
holes so that their position is clear when the
heater is removed.
3. Remove the heater.
4. Drill an appropriate size hole in each of the
Page 9
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 5. Slots for screw fixing.
Figure 4.

marked positions. Insert wall plugs into the drilled
holes.
5. Place the heater so that the slotted holes are in
line with the wall plugs in the fixing surface.
6. Screw and secure the heater with two wood
screws (See figure 3).
Method B - Wire fix.
This method of fixing needs a fireplace opening
and is recommended when fixing the heater to a
marble surround or where the wall or brickwork is
in poor condition.
1. The fixing kit supplied with the heater includes
a steel wire and eyescrew (See figure 3). These
can be used to secure the heater to the back of a
fireplace opening.
2. Mark the eyescrew position on the
centre line at the back of the fireplace
opening and at a height of 533-560mm
(21 inches - 22 inches) (See figure 6).
3. Drill an appropriate size hole in the
marked position.
4. Insert a wall plug into the drilled
hole.
5. Screw the eyescrew into the wall
plug.
6. Position the heater in front of the
fireplace opening.
7. At the top of the heater there are
four small holes, two each side of the
heater (See figure 7 - Item 1). From
the front of the heater, thread about
50mm ( 2 inches) of the steel wire into
the inside small hole on the left side of
the heater (See figure 7 - item 2).
8. Thread the other end of the wire
through the remaining small hole on
the left hand side of the heater.
Continue to push the wire through this
hole until there is only a small loop of
wire at the front of the heater (See
figure 7 - item 3).
Page 10
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 7. Steel wire fixing (Detail at top of
heater may differ from that shown)
Figure 6. Eyescrew position.

9. At the back of the heater there will be a long piece and a short piece of wire
coming through the two holes. Hold the short piece and give the long piece a gentle
tug. This will secure the steel wire. Take the long piece and thread this through the
eyescrew in the back of the fireplace opening (See figure 7 - item 4).
10. From the back of the heater thread the long piece of steel wire through the outer
small hole on the right hand side of the heater (See figure 7 - item 5).
11. Locate the heater in the fireplace opening, then from the front of the heater, gently
pull the steel wire on the right hand side to gather up the excess until the heater is
secure. Thread the wire through the remaining small hole to lock the wire and heater
in place (See figure 7 - item 6).
Method C - Spacer Frame
The optional spacer frame is for use during installations where a chimney recess or
rebated fire surround are not available. For your safety the frame and heater must be
securely fixed to the rear wall.
Fitting the spacer frame
The rear of the spacer has two screw location
slots in the top flange. These should be to the
rear when fitting.
1. Position the spacer frame against the wall.
Ensure that the spacer frame is central to the
fireplace.
2. The top rear flange of the spacer frame has
two screw locations. Mark the positions of the
two screw locations on the rear wall (See figure
8).
3. Remove the spacer frame from the fireplace and place away from the work area.
4. Drill the screw locations using a suitably sized masonry drill bit for the wall plugs
supplied.
5. Insert two wall plugs provided into the holes.
6. Insert a wood screw into each hole and screw in until there is approximately 6mm
of screw protruding from the wall.
Preparing the heater for installation.
1. Ensure that the decorative front surround has been
removed from the heater as described earlier in this
guide.
2. Using the four No.8 x 3/8 screws provided, fix the
heater to the spacer frame.
3. There is a supply cable slot on both sides of the
spacer frame. It is located at the base. Decide which
side to pass the supply cable through and position the
supply cable in the spacer frame slot (See figure 9).
Page 11
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 8. Location points
Figure 9. Locating the cable

Fitting the heater.
1. Locate the spacer frame and
heater over the screw heads ensuring
a tight fit. If the fit is loose, remove the
spacer frame and heater from the
wall. Tighten the wall screws slightly
and reposition the spacer frame and
heater.
Fitting the light diffuser.
1. There is a light diffuser supplied
with the heater (See figure 3). Place
this on to the metal flange below the
plastic screen (See figure 10).
Fitting the Fascia
Blenheim model.
1. Removing the fascia trim may have moved the
magnets used to fix it to the heater. The magnets
should be located as in figure 11.
2. Locate the fascia onto the heater. Ensure that the
sides of the fascia sit on the floor / hearth.
3. There are two hanging screws on the rear of the
firefront. Locate these into the slots as in figure 12.
4. Place the one piece fuel effect on top of the firefront
fuel support.
Page 12
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 12. Firefront location
Figure 11.
Figure 10. Diffuser location

Seattle model.
1. With the fascia trim removed, unscrew and remove
the two screws from the lower right hand side of the
heater (See figure 13) then align the four holes in the
firefront assembly with those on the heater (See figure
14). Secure with the two screws removed previously
and two screws supplied.
2. Removing the fascia trim may have moved the
magnets used to fix it to the heater. The magnets
should be located as in figure 11.
3. Place the one piece fuel effect on top of the firefront
fuel support.
Page 13
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 14.
Figure 13.

4. USING THE HEATER
Important Safety
Never cover the heater or obstruct the openings at the base of the heater, this
could cause overheating and consequent risk of fire.
What are the three switches for?
The heater is operated by three switches located below the hood on the left hand side
of the heater.
Switch 1 = Main On - Off. (In the ‘ON’ position, only the flame
effect operates)
Switch 2 = 1kW fan heat setting and flame effect. (Switch 1 needs
to be in the ‘ON’ position to enable switch 2 to operate).
Switch 3 = 2kW fan heat setting and flame effect. (Switches 1 & 2
need to be in the ‘ON’ position to enable switch 3 to
operate).
What is the knob for?
The heater has a variable energy control located below the hood on the right hand
side of the heater.
The variable energy control will only work when all three switches are on. If the room
requires maximum heat, rotate the control fully clockwise. For less heat rotate the
control counterclockwise until the required heat setting is achieved. When operating
the variable energy control will operate between the 1kW and 2kW settings. Turning
the knob fully counterclockwise will switch the variable energy function off.
Page 14
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 15. Controls

5. CLEANING AND MAINTAINING THE HEATER
How do I clean my heater?
The heater fascia and plastic parts need only to be wiped clean with a dry soft cloth,
do not use polishes or abrasive materials. The Seattle heater may have fingerprints
on the fascia surface. These can be removed by applying a small amount of ‘baby oil’
to a lint free non-abrasive cloth and wiping the surface. Use a clean cloth to remove
the oil.
I have a problem with my heater!
Important Safety
Before undertaking maintenance always disconnect the heater from the
electricity supply by removing the 3 pin plug and allowing the heater to cool
completely.
1. My heater is on but there is no light or heat.
The first thing to do is check the wall socket. To do this plug in a known working
appliance. If the appliance you have plugged in works then there is a good chance
that the problem lies with the 13 Amp fuse in the heater plug. If either fuse or socket
is suspected, have them checked by an electrician.
2. My heater is on but there is no heat.
A cut out device is fitted to the heater to prevent damage due to over heating. If it
operates due to an obstruction in the airflow, the heater must be turned off and
allowed to cool for 15 minutes and the obstruction removed before restarting.
3. I Have a problem that is different to those in the previous examples
1- 3.
For general advice about your heater call:
Valor Fires TECHNICAL HELPLINE 0844 8711 565.
CALLERS IN THE REPUBLIC OF IRELAND
Call 0044 844 8711 565
What should I do when I’m ready to dispose of my heater?
The plug should be removed from the mains cable and the mains cable cut from the
heater. These should be disposed of with the heater.
Environmental Protection.
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Page 15
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

6. WARRANTY AND SERVICE
Information for the customer
Standard Warranty Terms & Conditions
The warranty is for 12 months subject to contract.
In the United Kingdom servicing can be carried out either by a heateam service
engineer or a suitably qualified person.
You must register your heater with heateam, the service division of Baxi Heating UK
Limited, either by completing and returning the registration card or calling our free
telephone registration line on 0800 032 72 44.
Our promise to you
If you experience a fault with your new heater, we aim to provide a safe and high
quality repair service supported by our dedicated national network of highly skilled
engineers. Nothing in this warranty will affect your statutory rights.
What you need to do if you experience a problem with the operation of the heater;
Read section 5 of this guide “Cleaning and maintaining the heater”. If the problem
cannot be resolved simply call our service division heateam on
0844 8711 565 to book an engineer visit or for any general advice that you may need.
Our contact centre is open Monday to Friday 8am – 6pm, weekends and Bank
Holidays 8.30am – 2pm, excluding Christmas Day and New Years day.
When calling heateam, it would be helpful if you could have the following information
to hand:-
1. Heater serial number.*
2. Heater brand and model number.*
3. Date of installation.*
4. Proof of purchase (If you do not have the heater serial number)
*Note: Details 1 – 3 can be found on the last page of this guide.
What this warranty covers
Free of charge repair or replacement of components found to be of faulty
manufacture.
Free of charge replacement of the complete unit providing the failure is related to a
manufacturing fault that cannot be repaired or is uneconomic to repair.
Page 16
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

What this warranty does not cover
Repairs to heaters which haven’t been installed properly and as set out in this guide.
Faults caused by inadequate supply of electricity.
Reimbursement of any third party repair or replacement costs that we haven’t been
told about or agreed with you in advance.
Compensation or consequential losses (e.g. loss of earnings, business losses, stress
and inconvenience) arising from a production breakdown, including repair delays
caused by factors outside our reasonable control.
Page 17
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

Page 18
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.

Page 19
INSTALLER AND OWNER GUIDE
© Baxi Heating U.K. Limited 2010.
Brand (Please tick)
Baxi
Valor
Wonderfire Other.................
D D M M Y Y
Date of Installation
Fascia name (Block Capitals)
Fascia code - Can be found close to the information label (Block Capitals)
Figure 16
Model
8 2 0
Serial number (Can be found on the information label - See figure 16)
To be completed by the customer:
A LABEL CONTAINING THE
SERIAL NUMBER MAY
HAVE BEEN PLACED
INSIDE THIS BOX.
A LABEL CONTAINING
THE FASCIA CODE
MAY HAVE BEEN
PLACED INSIDE THIS
BOX.

© Baxi Heating U.K. Limited 2010.