Velleman IVSPROM2 User manual

I
I
N
I
V
I
V
S
Y
E
A
S
I
I
N
VSP
R
N
TELLI
G
V
S – EA
V
S INT
E
Y
ST
È
M
E
A
GLE E
Y
I
STEM
A
N
TELLI
G
R
OM
2
G
ENT V
I
GLE EY
E
E
LLIGE
N
E
DE VI
D
Y
ES
A
DE VI
G
G
ENTE
M
2
I
DEO S
E
E
S
N
TE MO
B
DÉ
OSU
R
G
ILANC
I
M
OBILE
E
CURIT
Y
B
IELE V
R
VEILL
A
I
A M
Ó
V
I
VIDEO
-
Y
SET F
O
IDEOB
E
A
NCE M
O
I
L INTE
-
ÜBER
W
O
R MO
B
E
WAKIN
O
BILE I
N
LIGEN
T
W
ACHUN
B
ILE SU
R
G – EA
G
N
TELLI
G
T
E – IV
S
G – IV
S
R
VEILL
A
G
LE EY
E
G
ENT I
V
S
– EAG
L
S
– EAG
L
A
NCE –
E
S
V
S –
L
E EYE
S
L
E EYE
S
S
S

IVSPROM2
V. 02 – 02/05/2012 2 ©Velleman nv
QUICK INSTALLATION GUIDE..................................................................... 4
1.Introduction...................................................................................................................... 4
2.Safety Instructions ............................................................................................................ 4
3.General Guidelines............................................................................................................. 4
4.Features........................................................................................................................... 5
5.Connection and setup......................................................................................................... 6
6.GUI display with USB mouse control..................................................................................... 8
7.Front and rear panels........................................................................................................10
8.Basic operation ................................................................................................................12
9.Set push notification .........................................................................................................14
10.Set flow counting – virtual fence – one-way pass ..................................................................17
11.Technical specifications .....................................................................................................19
KORTE HANDLEIDING .............................................................................. 21
1.Inleiding..........................................................................................................................21
2.Veiligheidsinstructies.........................................................................................................21
3.Algemene richtlijnen .........................................................................................................21
4.Eigenschappen.................................................................................................................22
5.Aansluiting en instelling.....................................................................................................23
6.GUI-display met USB-muis.................................................................................................25
7.Front- en achterpaneel......................................................................................................27
8.Basisfuncties....................................................................................................................28
9.Instellen van de meldingfunctie ..........................................................................................31
10.Mensentelling – virtuele muur – mensenstroom ....................................................................33
11.Technische specificaties.....................................................................................................36
GUIDE D’INSTALLATION RAPIDE.............................................................. 38
1.Introduction.....................................................................................................................38
2.Consignes de sécurité .......................................................................................................38
3.Directives générales..........................................................................................................38
4.Caractéristiques ...............................................................................................................39
5.Connexion et configuration.................................................................................................40
6.Pilotage GUI avec souris USB .............................................................................................42
7.Description des panneaux frontal et arrière ..........................................................................44
8.Fonction de base ..............................................................................................................45
9.Configuration de la fonction de notification...........................................................................47
10.Comptage de personnes – barrière virtuelle – flot humain ......................................................50
11.Spécifications techniques...................................................................................................53
GUÍA RÁPIDA ........................................................................................... 55
1.Introducción ....................................................................................................................55
2.Instrucciones de seguridad.................................................................................................55
3.Normas generales.............................................................................................................55
4.Características .................................................................................................................56
5.Conexión y configuración...................................................................................................57
6.Control GUI con ratón USB.................................................................................................59
7.Descripción del panel frontal y el panel trasero .....................................................................61
8.Funcionamiento básico ......................................................................................................63
9.Configurar la función de notificación....................................................................................65
10.Contador de personas – barrera virtual – flujo de personas.....................................................68
11.Especificaciones ...............................................................................................................70
SCHNELLEINSTIEG ................................................................................... 72
1.Einführung.......................................................................................................................72
2.Sicherheitshinweise ..........................................................................................................72
3.Allgemeine Richtlinien .......................................................................................................72
4.Eigenschaften ..................................................................................................................73
5.Anschluss und Einstellung..................................................................................................74
6.GUI-Display mit USB-Maus.................................................................................................76
7.Front- und Rückplatte .......................................................................................................78
8.Basisfunktionen................................................................................................................80
9.Eine Meldefunktion einstellen .............................................................................................82
10.Personenzählung – virtuelle Mauer – Flusskontrolle ...............................................................85
11.Technische Daten .............................................................................................................87

IVSPROM2
V. 02 – 02/05/2012 3 ©Velleman nv
A B (SATA)
power supply data bus
voeding databus
alimentation bus de données
alimentación bus de datos
Stromversorgung Datenbus
1 DC 12V input terminal
2 Video output connector
1 DC 12V ingangsaansluiting
2 Video-uitgangsaansluiting
1 Connexion d’entrée CC 12V
2 Connexion de sortie vidéo
1 DC 12V-Eingangsanschluss
2 Video-Ausgangsanschluss
1 Conexión de entrada CC 12V
2 Conexión de salida de vídeo
* not incl. - niet meegelev. - non incl. - no incl. - *nicht mitgeliefert

V.
1
.
T
o
I
m
Th
bri
(E
n
IV
S
m
o
co
m
Se
vi
s
co
u
All
cl
a
Fo
2
.
C
A
To
ap
da
3
.
Re
be
•
•
•
02 – 02/05/2
.
Intr
o
o
all reside
n
m
portant e
n
This
har
m
shou
distri
If in
ank you for
nging this d
n
glish only).
S
DVR Syst
e
o
bile device
m
es with m
a
e http://w
w
s
it the IVS
w
and
u
ntries.
registered
t
a
rification of
r licensing,
r
.
Safe
t
A
UTION:
reduce the
paratus fro
m
mages arisi
n
Th
e
us
e
be
Thi
im
p
ap
p
Ke
e
Ri
s
ele
c
D
O
us
e
pa
r
Thi
po
w
ea
r
lik
e
.
Gen
e
fer to the V
e
found on t
h
Indoor u
s
objects fill
e
Keep this
d
around th
e
Protect thi
012
o
duction
n
ts of the
E
n
vironmen
t
symbol on t
h
m
the enviro
n
ld be taken
t
butor or to
a
doubt, co
n
choosing V
e
evice into s
e
e
m is the W
o
(iPhone, iPa
a
ny mobile
s
w
w.youtube.
c
w
ebsite.
(EagleEye
s
t
rademarks
a
the compat
r
efer to the
f
t
y Instr
u
risk of elect
m
the type o
n
g out of an
y
e
lightning fl
e
r to the pre
of sufficient
s exclamati
o
p
ortant oper
p
liance.
e
p the devic
e
s
k of electr
o
c
troshocks.
O
NOT disas
s
e
r-serviceab
l
r
ts.
s is a Safet
y
w
er cord). T
h
r
th contact.
A
e
ly to make
t
e
ral Gui
d
e
lleman®
S
h
e included
C
s
e only. Ke
e
e
d with liqui
d
evice away
e
apparatus.
s device fro
m
QUIC
K
E
uropean U
n
t
al informa
t
h
e device o
r
n
ment. Do n
t
o a speciali
a
local recy
c
n
tact your l
e
lleman! It i
s
e
rvice the fi
r
o
rld’s 1st In
t
d, Android
p
s
urveillance
c
om/watch?
v
s
) -
T
he tra
d
a
nd trade n
a
ibility of our
f
ull user ma
u
ctions
ric shock, d
o
f power sou
y
improper
u
ash with ar
r
sence of no
n
magnitude
t
o
n mark wit
h
ating and m
e
away fro
m
o
shock wh
e
Have the d
e
s
emble or o
p
l
e parts insi
d
y
Class 1 Pr
o
h
e mains pl
u
A
ny interru
p
t
he instrum
e
d
elines
S
ervice an
d
C
D ROM.
e
p this devi
c
d on top.
from dust
a
m
shocks a
n
K
INS
T
n
ion
t
ion about
t
r
the packag
ot dispose
o
zed compan
c
ling service
.
ocal waste
s
strongly r
e
r
st time. Th
e
t
elligent DV
R
p
hone…) wit
h
functions in
c
v
=DKKzWJ
A
d
emark appl
a
mes are pr
o
products w
i
nual on the
RISK
o
not expos
e
rce indicate
d
u
se, even if
r
owhead sy
m
n
-insulated
“
t
o constitut
e
h
in an equil
a
aintenance
m
children a
n
e
n opening t
e
vice repaire
p
en the cov
e
d
e the devic
e
o
duct (provi
d
u
g shall onl
y
p
tion of the
p
e
nt dangero
u
d
Q
uality
W
c
e away for
m
a
nd extreme
n
d abuse. A
v
IVSPROM
2
4
T
ALLA
T
t
his produ
c
e indicates
t
o
f the unit (
o
y for recycli
.
Respect th
e
disposal a
e
commende
d
e
complete
u
R
Surveillan
c
h
EagleEyes
c
luding reco
A
g7Lw for a
d
ication is fil
e
o
perties of t
i
th the prod
u
included CD
CAUTI
O
OF ELECT
R
e
this appar
a
d
on the lab
e
we have be
e
m
bol, within
“
dangerous
v
e
a risk of el
a
teral triang
l
(servicing) i
n
d unauthori
he cover. T
o
d by qualifi
e
e
r unless ot
h
e
. Refer to
a
d
ed with a p
y
be inserte
d
p
rotective c
o
u
s. Intentio
n
W
arranty on
m
rain, mois
t
heat. To o
b
v
oid brute fo
2
T
ION
G
c
t
t
hat disposa
o
r batteries)
ng. This de
v
e
local envi
r
uthorities.
d
to read th
e
u
ser manual
c
e System.
T
software w
h
gnizing and
d
emo video
e
d and unde
heir respect
u
cts of the
d
-ROM.
O
N
R
IC SHOCK
a
tus to rain
o
e
l. The com
p
e
n advised
o
an equilate
r
v
oltages” wi
ectric shock
l
e is intende
nstructions
i
sed users.
o
uching live
e
d personnel
h
erwise indi
c
a
n authorize
d
rotective ea
r
d
in a socket
o
nductor ins
i
n
al interrupt
the last pa
g
t
ure, splashi
b
tain sufficie
rce when o
p
G
UIDE
l of the devi
as unsorte
d
v
ice should
b
r
onmental r
u
e
full versio
n
can be fou
n
T
his system
h
en events
o
counting p
e
or http://w
w
r process in
ive owners
a
d
ifferent ma
n
o
r moisture.
p
any shall n
o
o
f the possi
b
r
al triangle,
i
thin the pro
d
to persons.
d to alert th
i
n the litera
t
wires can c
a
.
c
ated in this
d
dealer for
r
thing grou
n
outlet provi
i
de or outsi
d
ion is prohi
b
g
es of the fu
ng and drip
p
nt air coolin
g
p
erating the
ce after its l
d
municipal
w
b
e returned
t
u
les.
n
manual th
o
n
d on the in
c
instantaneo
o
ccur. Easy
t
e
ople.
w
w.eagleey
e
the U.S. an
a
nd are use
d
n
ufacturers.
Only opera
t
o
t be liable
f
b
ility of such
i
s intended
t
d
uct’s enclo
s
e user to th
e
t
ure accomp
a
use life-thr
e
manual. Th
e
service and
/
n
d incorpora
t
ded with a
p
d
e of the ins
t
b
ited.
ll user man
u
p
ing liquids.
g
, leave en
o
device.
©Vellema
n
ifecycle cou
l
w
aste; it
t
o your
o
roughly bef
c
luded CD-R
O
usly notifies
t
o install. It
e
scctv.com/
t
d other
d
only for th
e
t
e this
f
or any
damages.
t
o alert the
s
ure that m
a
e
presence
o
anying the
e
atening
e
re are no
/
or spare
t
ed in the
p
rotective
t
rument is
u
al which ca
n
Never put
o
ugh space
n
nv
l
d
ore
O
M
a
t
o
e
a
y
o
f
n

IVSPROM2
V. 02 – 02/05/2012 5 ©Velleman nv
•Familiarise yourself with the functions of the device before actually using it.
•All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
•Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
•Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the
dealer will not accept responsibility for any ensuing defects or problems.
•Keep this manual for future reference.
•DO NOT use this product to violate privacy laws or perform other illegal activities.
4. Features
The IVS DVR holds following features:
Flow counting
A virtual detection line can be set to detect the moving
direction of pedestrians for flow counting
Virtual fence / one-way pass
A virtual intruder detection line is set to detect
intruders coming from a specified direction
Power Mobile support
Eagle Eyes for Mobile Surveillance.
Mobile surveillance via the EagleEyes
software is supported on many popular
mobile platforms, e.g. iPhone, Android,
BlackBerry, Windows Mobile and Symbian.
Push notification on mobile device
When an event is detected by the human detection
camera, the IVS DVR will immediately send an instant
notification (Push notification) to a mobile device
(iPhone, iPad, Android phone…) within 5 seconds. Once
the notification is confirmed the mobile surveillance
software (EagleEyes) is automatically activated for
remote access.
DVR/Camera Communication System (DCCS) technology
With this system, control signals can be transferred directly via coaxial cable to control the
human detection camera. This highly simplifies the installation and reduces labour cost and
working hours.
IVS Human Detection camera
•Built-in Infrared sensor alarm for human detection and sending push notifications to a mobile device
(iPhone, iPad, Android phone…)
•Supports DVR / Camera Communication System (DCCS) Technology
oThere is no need to additionally connect RS485 control wires for camera control because the control
signals can be transferred directly via coaxial cables.
oCamera installation is highly simplified resulting in lower labour cost and working hours.
•IR LEDs built-in for 24-hour day & night surveillance
•Smart Light Control to dynamically adjust image performance for clear and accurate images.

IVSPROM2
V. 02 – 02/05/2012 6 ©Velleman nv
System
•GUI (Graphical User Interface) display and USB mouse control
•Gmail integration supports notification through Google mail server and any other mail support
•local and remote control completely independent
•VGA interface built-in with output resolution up to 1600 x 1200
•set contains:
o1 x 4-channel H.264 Full frame DVR
o1 x human detection PIR camera
o1 x IR remote control
o1 x 20m camera cables
o1 x 19V PSU
o1 x high-efficiency DC-DC converter for DVR and 4 cameras
•hard disks in option: (not included) 500GB (HD500GB/S) or 1TB (HD1TB/S)
•IR remote control: DVRRC4 (incl.)
•optional monitor (not incl.): MONSCA4, MONSCA5, MONSCA6, MONSCA7
•optional router (not incl.): PCRT1, EM4542, EM4553, EM4570.
5. Connection and setup
Before the DVR is powered on, make sure you have installed a hard disk, connected at least one camera and a
monitor.
Note: The DVR is designed to automatically detect the video system of the connected cameras (NTSC or PAL).
To make sure the system detection is correct; please check if the cameras are connected to the DVR and
power-supplied before the DVR is powered on.
5.1 Prerequisites
•To ensure the signal transmission, the recommended distance between this DVR and cameras should not
exceed 200 meters by using 3C2V coaxial cables (112 braids).
Using different types of coaxial cables or longer connection distances may influence the availability and
continuity of signal transmission.
•Do not use a signal booster or modem to amplify signals and extend the connection distance.
5.2 Hardware setup
Refer to the illustrations on page 3of this quick installation guide.
Connecting a video monitor
Obtain a suitable monitor (not included) and connect it to the BNC or VGA video output port on the back of
the DVR.
Note: the CAL video output simply shows the camera output(s) directly from the video input ports. Data and/or
actions performed via the main monitor are not shown.
Connecting the power supply
1. Plug the DC output connector of the included power adaptor into the 19VDC power input at the back of
the DVR.
WARNING: only use the included adaptor.
2. Plug the included power cable into the adaptor input connector and plug the other end into the mains.
Do not switch the DVR on yet.
Connecting a camera
1. Choose a location for the camera, keeping following guidelines in mind:
oDo not install the camera in locations where extremely high or low temperatures or excessive vibrations
may occur.
oAvoid mounting the camera near high electro-magnetic fields.
oDo not aim the camera at the sun or other extremely bright objects.
2. Use the included cables to connect the video output of the camera to either video input at the back of
the DVR. The number next to the input connectors represents the channel number. Connector type is BNC.
3. Connect each camera to the power supply adaptor.
Note: The cameras must be connected and powered on before the DVR is powered on.

IVSPROM2
V. 02 – 02/05/2012 7 ©Velleman nv
Connecting audio
•The DVR supports four audio inputs. Connect the audio output of an audio source to an audio input of
the DVR. Make sure to connect the audio channel to the corresponding video channel. Connector type
is RCA.
•There is also an audio output connector. Connect an audio device e.g. a speaker to this connector when
desired. Connector type is RCA.
Note: the cameras shipped with the IVSPROM2 DO NOT support audio recording.
Connecting Local Area Network (LAN)
Connect the DVR to a local network by plugging a network cable into the LAN port at the back of the DVR.
Connector type is 8P8C (RJ45). Setup is done through the OSD.
5.3 DVR power on
1. This device should be operated only with the type of power source indicated on the manufacturer’s label.
Connect the indicated AC power cord to the power adapter, and plug into an electrical outlet.
Note: Before the DVR is powered on, make sure that (1) the cameras are connected and powered on for
the detection of the camera video system to be correct, and (2) a monitor (either LCD or CRT monitor, not
incl.) is connected to the DVR for correct video output detection.
2. Switch on the DVR with the power switch on the back of the device. It will take about 30s for the DVR to
initialize.
Note: To ensure that your DVR works constantly and properly, it is recommended to use an UPS
(Uninterruptible Power Supply, not incl.), for continuous operation.
5.4 Date and time setting
Before operating your DVR, please set the date and time on your DVR FIRST.
Note: DO NOT change the date or time of your DVR after the recording function is activated. Otherwise, the
recorded data will be disordered and you will not be able to find the recorded file from backup by time search.
If users change the date or time accidentally when the recording function is activated, it is recommended to
clear all HDD data, and start recording again.
Note: when using the DVR for the first time, leave it powered on for at least 48 hours continuously after the
date & time is set correctly. To replace the internal battery, refer to APPENDIX 6 in the full user manual.
1. Right-click to enter the DVR password with the password keypad. The default administrator password
is 0000.
The status will be changed from (key lock) to (administrator).
2. Right-click to show the main menu, and select QUICK START > TIME SETUP to set the date & time.
QUICK START
GENERAL DATE 2009 / NOV / 17
TIME SETUP TIME 15 : 35 : 53
EXIT
5.5 Clear hard disk
It is recommended to clear all data in the hard disk when using this DVR for the first time to ensure the
recorded data are not mixed with other data previously saved in the same hard disk.
1. Right-click to show the main menu, and select SYSTEM > SYSTEM INFO > CLEAR HDD.
2. The DVR will reboot when HDD data are cleared. For details, refer to §5.3.2 in the full user manual.

IVSPROM2
V. 02 – 02/05/2012 8 ©Velleman nv
SYSTEM
TOOLS BAUD RATE 2400
SYSTEM INFO HOST ID 000
USB BACKUP R.E.T.R 5
DVD BACKUP AUTO KEY LOCK NEVER
CLEAR HDD HDD-0
RESET DEFAULT SUBMIT
REMOTE CONTROL ID 000
SERIAL TYPE RS485
VIDEO FORMAT NTSC
VERSION 1019-1008-
1010-1010
EXIT
5.6 Password setting
1. Right-click to show the main menu, and select SYSTEM > TOOLS to change the DVR password.
2. There are two user levels: ADMIN and OPERATOR. For details, please refer to 5.3.1 TOOLS in the full user
manual. SYSTEM
TOOLS LANGUAGE ENGLISH
SYSTEM INFO ADMIN PASSWORD SETUP
USB BACKUP OPERATOR PASSWORD SETUP
DVD BACKUP UPGRADE SUBMIT
BACKUP CONFIG SUBMIT
RESTORE CONFIG SUBMIT
EXIT
6. GUI display with USB mouse control
6.1 Connect a USB mouse
1. Connect a USB mouse (not incl.) to the mouse port on the DVR front panel, and check if there is a mouse
icon on the screen, indicating the USB mouse is detected properly.
2. Move your mouse to enter the DVR password with the password keypad. The default administrator
password is 0000.
The status will change from (key lock) to (administrator), and the quick menu bar appears on the left side
of the screen.
Note: There are two user levels for DVR access which can be set in the main menu SYSTEM > TOOLS.
Password Input Quick Menu (closed)

IVSPROM2
V. 02 – 02/05/2012 9 ©Velleman nv
6.2 Quick menu bar
Move to the mouse pointer to the left of the screen to extend the quick menu bar and show the six functions:
Quick Menu (extended)
Click to show the channel switch panel and select the preferred panel layout.
Click to display the playback the control panel, and click to play the latest recorded video clip, or
click to enter the search list.
Switch to the channel you want first, and click to enter the zoom-in mode. In this mode, click and
drag the red frame on the bottom left of the screen to move to the place you want to see. To exit this
mode, click 7.
Click to select the desired audio channel.
In live mode, only the live audio channels can be selected.
In playback mode, live and playback audio channels can be selected.
Click to enter the PTZ mode and show the PTZ camera control panel (when applicable).
Click to show the power off panel to either halt or reboot the system.
6.3 Main menu
Right-click anywhere on the screen to show the main menu as follows, and right-click again to exit.
Main Menu
Main menu structure
*: selected models only
QUICK START: click to set the status display, image settings, and date & time.
GENERAL CHANNEL TITLE – EVENT STATUS – DATE DISPLAY – DCCS DISPLAY – MOUSE
SENSITIVITY – PRIORITY* – RECORD CONFIG
TIME SETUP DATE - TIME
DATE SETUP: click to set the date display and daylight saving.
DATE INFO DISPLAY DATE OF MODE – FORMAT
DAYLIGHT DAYLIGHT SAVING

IVSPROM2
V. 02 – 02/05/2012 10 ©Velleman nv
SYSTEM: click to set the system configurations.
TOOLS LANGUAGE – ADMIN PASSWORD – OPERATOR PASSWORD – UPGRADE -
BACKUP CONFIG – RESTORE CONFIG
SYSTEM INFO BAUD RATE – HOST ID – R.E.T.R. – AUTO KEY LOCK – CLEAR HDD – RESET
DEFAULT – REMOTE CONTROL ID – SERIAL TYPE – VIDEO FORMAT – VERSION
BACKUP DATA (USB)
BACKUP LOG (USB)
EVENT INFORMATION: click to enter the event search menu.
QUICK SEARCH
EVENT SEARCH
HDD INFO
EVENT LOG
ADVANCED CONFIG: click to set CAMERA, DETECTION, ALERT, NETWORK, DISPLAY, RECORD,
DEVICES, DCCS, IVS* & NOTIFY*.
CAMERA BRIGHTNESS – CONTRAST – SATURATION – HUE - COV. – REC - CHANNEL
TITLE
DETECTION LS – SS – TS – MOTION – ALARM - AREA
ALERT EXT. ALERT – INT. BUZZER – KEY BUZZER – VLOSS BUZZER – MOTION BUZZER – ALARM BUZZER – HDD BUZZER – ALARM DURATION (SEC) – HDD NEARLY
FULL (GB)
NETWORK NETWORK – SNTP – FTP – E-MAIL
DISPLAY
DE-INTERLACE* – FULL SCREEN DURATION – QUAD SCREEN DURATION* –
CALL SCREEN DURATION – DISPLAY COVERT – HDD DISPLAY MODE – VIDEO
OUTPUT* – ALPHA BLENDING – VGA OUTPUT – VGA DEINTERLACE* –
COMPOSITE DEINTERLACE*
RECORD MANUAL RECORD – EVENT RECORD – TIMER RECORD – PRE-ALARM RECORD – OVERWRITE – EVENT RECORD ALL CH – KEEP DATA LIMIT (DAYS) – RECORD
CONFIG
DEVICES
DCCS
IVS* CAMERA* – IVS MODE – DISPLAY LINE – SENSITIVITY – RESET COUNT –
VIRTUAL FENCE AREA – SCENE CHANGE – SCENE CHANGE SENSITIVITY
NOTIFY* GUARD
SCHEDULE SETTING: click to set record timer and detection timer.
RECORD
DETECTION
ALARM
7. Front and rear panels
7.1 Front Panel
•LED indicators
DVR is powered on.
HDD is reading or recording.
An alarm is triggered.
Timer recording is on.
Under playback status.
•: For models with a DVD writer, press to open or close it.
•CH1 ~ 4: Press the channel number buttons to select the channel to display.
•: Press to show the 4 channel display mode.
•SEQ: Press to display each channel in full screen one by one starting from CH1. When the last channel is
displayed, it will repeat from CH1 again. To exit this mode, press SEQ again.
•SLOW: In playback mode, press to show slow playback.

IVSPROM2
V. 02 – 02/05/2012 11 ©Velleman nv
•ZOOM: Press to enlarge the picture of the selected channel (in FRAME or FIELD recording mode).
•PLAY: Press to playback the latest recorded data.
•LIST (Event List Search): Press to quickly search the recorded files by event lists: RECORD / MOTION /
ALARM / TIME / HUMAN DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.
•MENU: Press MENU to enter the main menu.
•ENTER: Press ENTER to confirm the setting.
•: Press ▲/ ▼/ ◄/ ►to move up / down / left / right.
In playback mode:
Press to pause playback.
Press to stop playback.
Press to fast forward.
Press to fast rewind.
•AUDIO (SLOW + ZOOM): Press SLOW + ZOOM to select live or playback audio from audio channel 1~4.
Live audio from audio channel 1~4
(indicated in white). Playback audio from audio channel 1~4 (indicated in yellow).
Audio channel unselected
•P.T.Z. ( + SEQ): Press + SEQ at the same time to enter or exit the PTZ control mode.
•USB port: There are two USB ports on the front panel, one for connecting a USB mouse for mouse control,
and the other one for connecting an USB flash drive for video backup.
Note: Do not connect two USB mice or two USB flash drives simultaneously.
Note: For compatible USB flash drive list, please refer to APPENDIX 3 in the full user manual.
7.2 Rear Panel
•VIDEO IN (1 ~ 4): Connect to the video connector of a camera.
Note: The DVR will automatically detect the video system of the camera; make sure that the cameras are
properly connected to the DVR and powered before the DVR is turned on.
•AUDIO IN (1~4): Connect to the audio connector of a camera if the camera supports audio recording.
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio CH1 will
be recorded with the video data from video CH1.
•AUDIO OUT: Mono audio output to connect to a speaker.
•MONITOR: Connect to a CRT monitor for video output.
Note: While connecting to a CRT monitor, it is also supported to connect to an LCD monitor simultaneously
for dual video output.
•CALL: Connect to a monitor specific for sequence display.
•VGA: Connect to an LCD monitor directly.
Note: While connecting to an LCD monitor, it is also supported to connect to a CRT monitor simultaneously
for dual video output.
•IR: Connect an IR receiver extension line (not incl.) for remote control.
•EXTERNAL I/O: This port is used to connect external devices (such as speed dome cameras or external
alarm, etc).
•LAN: Connect to Internet by LAN cable.
•DC 19V: Connect to the supplied adapter.
•Power Switch: Switch to | to turn on the power, to |to turn off the power.

IVSPROM2
V. 02 – 02/05/2012 12 ©Velleman nv
8. Basic operation
Note: some of the features and functions described below only apply to the human detection camera.
8.1 Live page
Refer to the image below.
1 system time
2 status bar
3 available disk capacity
4 recording icon
5 channel
6 motion icon
Icon Function Icon Function Icon Function
Live audio channel (1~4) Playback audio channel (1~4) Audio channel off
Digital zoom on Digital zoom off Timer recording
Network disconnected Internet connected LAN connected
USB mouse connected USB flash drive / device
connected No USB device connected
Key lock PTZ mode on HDD overwrite
Administrator Operator Sequence
Recording Alarm event Motion event
Virtual fence event One way pass event Scene Change event
Human detection event Flow counting enabled Smart zoom
Record mode: Frame Record mode: Field Record mode: CIF
DCCS connection OK DCCS connection failed
8.2 Record icon
•Manual Recording
By default, manual recording is on when the DVR is powered on and a HDD is installed.
•Event Recording
The event icons, / / / / / , are shown on the display when their respective events
occurred and the related record function is on.
•Timer Recording
When timer recording is on, is displayed on the screen.
•HDD Overwrite
Be default, the HDD overwrite function is set to ON, and will be shown on the screen.

IVSPROM2
V. 02 – 02/05/2012 13 ©Velleman nv
8.3 Playback
Click on the quick menu bar to display the playback control panel, and click to play the latest recorded
video clip, or click to enter the search list.
Refer to the image below:
1 progress bar 4 control bar
2 close 5 event search
3 information bar
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device
will stop playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds
(8192 images / 30 IPS) for the playback to work properly.
Note: During playback, the image size of the recording (FRAME, FIELD or CIF) will be shown on the screen.
Playback control
Fast Forward Increase the speed for fast forward. Click once to get 4X speed forward, click twice
to get 8X speed, etc. Maximum speed is 32X.
Fast Rewind Increase the speed for fast rewind. Click once to get 4X speed rewind, click twice to
get 8X speed, etc. Maximum speed is 32X.
/ Play / Pause Click to play the latest recorded video clip immediately, click again to pause.
In the pause mode, click once to get one frame forward, and click to get one
frame rewind.
Stop Click to stop the video playback.
Slow Playback Click once to get 1/4X speed playback, and click twice to get 1/8X speed playback.
/ Previous /
Next Hour
Click to jump to the next / previous time interval in an hour, for example,
11:00 ~ 12:00 or 14:00 ~ 15:00, and start playing the earliest event video clip
recorded during this whole hour.
Repeat Click to set point A and point B in a video clip, and the system will play only the
specified range in that clip.
Backup Click to open the backup menu for video backup.
Event search
•Click to quickly search the recorded files by event lists: RECORD / MOTION / ALARM / TIME / HUMAN
DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
•To quickly search the time you want, select QUICK SEARCH. For more details, refer to §5.4.1 in the full
user manual.
Audio playback
In the playback mode, click on the quick menu bar as many times as needed to select live or playback audio
from audio channel 1~4.
Live audio from audio
channel 1~4 (indicated in
white). Playback audio from audio
channel 1~4 (indicated in yellow).
Audio channel unselected
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio CH1 will be
recorded with the video data from video CH1.
8.4 User switch
•In the key lock mode , move your USB mouse to display the password input keypad. There are two user
levels for accessing the DVR: Administrator and Operator .
•When the administrator password is entered, will be shown on the status bar of the screen and all
operations are allowed. The default administrator password is 0000.

IVSPROM2
V. 02 – 02/05/2012 14 ©Velleman nv
•When the operator password is entered, will be shown on the status bar of the screen, and the main
menu is NOT accessible. The operator user level needs to be set in the main menu SYSTEM > TOOLS.
•To switch between these two user levels, click the current user level icon to switch to the key lock mode,
and move your mouse to show the password input keypad, and enter the password of the user level you
want.
8.5 Video output switch
Showing the video output simultaneously on a CRT monitor (connected to MONITOR) and LCD monitor
(connected to VGA) is supported.
To set the video output:
1. When the DVR is powered on and initialized, right-click to show the main menu, and select
ADVANCED CONFIG > DISPLAY > VIDEO OUTPUT.
2. Select BOTH if you want to output images on both LCD and CRT monitors; select VGA if you want to
output images on an LCD monitor; select COMPOSITE if you want to output images on a CRT monitor.
ADVANCED CONFIG
CAMERA DE-INTERLACE (For Selected Models Only) OFF
DETECTION FULL SCREEN DURATION 03
ALERT QUAD SCREEN DURATION (For Selected Models Only) 03
NETWORK CALL SCREEN DURATION 03
DISPLAY DISPLAY COVERT ON
RECORD HDD DISPLAY MODE HDD SIZE
DEVICES VIDEO OUTPUT (For Selected Models Only) BOTH
DCCS ALPHA BLENDING 200
IVS VGA OUTPUT 1024 X 768
NOTIFY VGA DEINTERLACE (For Selected Models Only) ON
COMPOSITE DEINTERLACE(For Selected Models Only) ON
EDIT
9. Set push notification
Note: only available on the human detection camera.
This IVS DVR series supports instant event notifications to your mobile device (iPhone, iPad, Android…) with our
self-developed program, EagleEyes, installed. When a human is detected by a human detection camera, the
DVR will immediately receive alarm signals and send them to your mobile device.
Note: EagleEyes is a powerful mobile surveillance program developed by AV TECH Corporation. For more
operations details about EagleEyes, visit http://www.eagleeyescctv.com.
For any comment or question about this program, contact Velleman. Visit www.velleman.eu for contact details.
You need to perform some settings on your mobile device for this function to work properly.
9.1 Prerequisite
Before setting this function, make sure you have checked the following:
1. You have a mobile device (iPhone, iPad, Android phone…) with our self-developed program, EagleEyes,
installed. For more details, see below under Program download.
2. A human detection camera is connected to your IVS DVR.
3. The event record function of your IVS DVR is enabled.
4. The motion detection function of your IVS DVR is enabled.
5. Your IVS DVR is connected to Internet. For details, refer to
http://www.surveillance-download.com/user/CMS.pdf.
6. Make sure the DVR is accessible over the Internet via a remote PC (not on the same network as the DVR).
9.2 Configuring the mobile device
Program download
1. Go to the App Store on your iPhone/iPad or to the Android/Google Play market with your Android phone.
2. Search the program with the keyword eagleeyes.
Note: You might be charged for Internet access via wireless or 3G networks. For the Internet access rate
details, check with your local network operator or service provider.

IVSPROM2
V. 02 – 02/05/2012 15 ©Velleman nv
3. Read the introduction of the program if needed, and select INSTALL to start the installation.
4. Follow the on-screen instructions to download and install the program. The EagleEyes icon will be
shown on the mobile device’s desktop for quick access when the program is installed successfully.
Program setup
1. Select to enter the Address book, and select +at the bottom left corner to enter the device IP address
setting page.
2. Give a meaningful title to this IP setting, and enter the IP information needed to access this IVS DVR.
3. Make sure all the information is correct and select Save on the top right corner to save your setting and
return to the address book page.
4. To check whether your configurations are correct, select >to immediately access the DVR you just added.
You should be able to see the live view of the DVR.
Column Description
Required Column:
Title Give a meaningful title to this IP setting.
IP Address / Port Enter the IP address and port number used to access this DVR remotely.
Username / Password Enter the user name and password used to access this DVR remotely. The default user
name and password are both admin.
Get Type Click this button to detect the device type based on the IP data entered in the previous
columns, allowing users to check whether the device they want to connect is the right
device, and allowing the system to enable the functions and settings the device supports.
Optional Column:
Audio Click >to select the audio channel you want, and slide to enable or disable the audio
function.
Note: Before using this function, check whether the camera connected to this DVR
supports audio transmission and the connection is correct. For details, please refer to the
DVR user manual.
Format Select the network transmission format.
Quality Click >to select the image quality from Best, High, Normal or Basic.

IVSPROM2
V. 02 – 02/05/2012 16 ©Velleman nv
Push notification on
Push notification must be enabled both on the DVR and on the mobile device.
1. Enter the ADVANCED CONFIG menu on the DVR and select NOTIFY.
ADVANCED CONFIG
CAMERA
DETECTION GUARD ON
ALERT CH1 LOBBY
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
2. GUARD: Set to ON to activate the Push Notification function.
Note: For details about DVR operations from mobile devices, please visit http://www.eagleeyescctv.com.
3. CH1: Enter the text you want to see when your mobile device receives Push Notification. The default text is
the channel number.
4. In the iPhone/iPad main menu, select Settings > Notifications.
5. Make sure Notifications is set to ON.
6. Select EagleEyes, and make sure its settings are set to ON.
Note: This setting isn’t necessary for Android phones.
7. Return to the iPhone/iPad main menu, and select to enter the address book.
8. Select the title you just added, and make sure the button is set to ON to enable the Push Notification
support of this IVS DVR.
9. Trigger the human detection alarm and see if you are notified.

IVSPROM2
V. 02 – 02/05/2012 17 ©Velleman nv
10. Set flow counting – virtual fence – one-way pass
Note: only available on the human detection camera.
Intelligent Video Surveillance (IVS) is the advanced application for motion detection, but more precise and
smarter. It can be applied to different situations with one of the following three modes: FLOW COUNTING,
VIRTUAL FENCE or ONE WAY.
Note: All four camera channels support this function.
On the DVR, right-click to show the main menu, and select > ADVANCED CONFIG > IVS.
ADVANCED CONFIG
CAMERA IVS1 IVS2 IVS3 IVS4
DETECTION CAMERA (For selected models only) CH3
ALERT IVS MODE FLOW COUNTING
NETWORK DISPLAY LINE OFF
DISPLAY SENSITIVITY 07
RECORD RESET COUNT SUBMIT
DEVICES VIRTUAL FENCE AREA SETUP
DCCS SCENE CHANGE OFF
IVS SCENE CHANGE SENSITIVITY MIDDLE
NOTIFY
EXIT
•CAMERA: Select the camera channel that you want to use the IVS function.
•IVS MODE: Select one of the following three modes depending on your environment:
MODE DESCRIPTION
FLOW COUNTING A virtual detection line is set to detect the moving direction of pedestrians for flow
counting.
VIRTUAL FENCE A virtual detection line is set to detect intruders crossing the detection line, and an
alarm will be triggered.
ONE WAY A virtual detection line is set to detect intruders from the specified direction, and an
alarm will be triggered.
•DISPLAY LINE: Select to display the detection line for IVS on the screen or not.
•SENSITIVITY: Set the sensitivity for IVS from 00 ~ 15. The larger the value, the more sensitive the IVS
will be.
•RESET COUNT: Click SUBMIT to reset the flow counting number to 0 when the IVS mode is set to FLOW
COUNTING and activated.
•VIRTUAL FENCE AREA: Click SETUP to draw the detection line for IVS, and set the detection direction
from left to right, or right to left. This area setting is the detection base for IVS MODE.
•SCENE CHANGE: Select ON to trigger a motion event when the camera is moved and the camera scene
changes. At the same time, the icon will also be shown on the screen in addition to the motion icon .
•SCENE CHANGE SENSITIVITY: Set the detection sensitivity for SCENE CHANGE to HIGH, MIDDLE
or LOW.
10.1 Flow counting
1. Go to VIRTUAL FENCE AREA to draw a detection line with your mouse, and decide the detection direction
by selecting REVERSE.
2. Finish the IVS setting and return to the live view. The IVS icon will be shown on the status bar.

IVSPROM2
V. 02 – 02/05/2012 18 ©Velleman nv
3. Click it to show the flow counting panel as follows.
When anyone walks across the detection line, the system will determine his movement is in or out, and add
one count to the corresponding channel on the flow counting panel.
IN People coming from the opposite direction to the arrow mark.
OUT People coming from the same direction as the arrow mark.
10.2 Virtual fence / one-way pass
VIRTUAL FENCE An event is triggered when anyone walks across the detection line from any direction, and
is shown on the screen.
ONE WAY An event is triggered when anyone walking across the detection line from the opposite
direction of the arrow mark, and is shown on the screen.
1. Go to VIRTUAL FENCE AREA to draw a detection line with your mouse, and decide the detection direction
by selecting REVERSE.
2. Finish the IVS setting and return to the live view.
When anyone walks across the detection line, the system will determine his movement is in or out.

IVSPROM2
V. 02 – 02/05/2012 19 ©Velleman nv
10.3 IVS Statistics
1. Click and then to enter the event search menu. Select STATISTIC.
LIST
QUICK SEARCH CHANNEL ;01 02 03 04
RECORD EVENT TYPE ;INFLOW
MOTION OUTFLOW
ALARM VIRTUAL FENCE
TIME ONE WAY
HUMAN DETECTION HUMAN DETECTION
IVS
MOTION
FULL
ALARM
STATISTIC HARD DISK ALL HDD
TIME 2010/MAY/17
STATISTIC SUBMIT
EXIT
2. Set all the criteria you want to search, and click SUBMIT in STATISTIC to show the event statistics.
3. Click LIST or CHART to see the statistics in list or chart form.
4. To switch to the month or year view, click DAY at the bottom.
IVS STATISTIC
LIST CHART S
HOUR COUNT
00:00 – 00:59 0
01:00 – 01:59 0
02:00 – 02:59 0
03:00 – 03:59 0
04:00 – 04:59 0
05:00 – 05:59 0
06:00 – 06:59 0
07:00 – 07:59 0
08:00 – 08:59 3
09:00 – 09:59 9 T
2010/MAY/17 DAY EXIT
11. Technical specifications
IVS DVR: (Intelligent Video Security DVR)
video format NTSC/PAL (auto detect)
video compression H.264
video input 4 channels, composite video signal 1Vpp / 75 ohms BNC
video output main monitor composite video signal 1Vpp / 75 ohms BNC
call monitor composite video signal 1Vpp / 75 ohms BNC
recording rate frame 704 × 576 pixels with 100 IPS (PAL)
recording speed adjustable for each channel
image quality setting super best - best - high - normal
hard disk storage SATA x2, support HDD capacity over 1TB (HDD not incl)
recording mode manual / timer / motion / alarm
multiplex operation live display, record, playback, backup and network
audio I/O 4 audio inputs, 1 audio output (mono)
motion detection area 16 x 12 grid per camera / 4 cameras
motion detection sensitivity 4 adjustable variables with precise calculation for motion detection
pre-alarm recording 8MB

IVSPROM2
V. 02 – 02/05/2012 20 ©Velleman nv
backup device USB 2.0 backup and network remote backup
Ethernet 10/100 Base-T, supports remote control and LiveView via Ethernet
web interface supports licensed software AP / IE and Firefox browser
remote alarm notification e-mail images, and image uploading to specific FTP site accounts
network connection supports TCP/IP, PPPoE, DHCP and DDNS function
PTZ control supports PELCO-D protocol
alarm I/O 4 inputs, 1 output
digital zoom 2x
power source 19VDC (incl.)
power consumption < 42W
operating temperature 10°C ~ 40°C
system recovery system auto recovery after power reconnected
dimensions 343 x 59 x 223mm
Human detection camera
pick-up element 1/3" HR Colour CCD image sensor
number of pixels 752(H)x582(V) PAL
resolution 480 TV lines
IR LEDs 12
min. illumination 0.17 lux (F2.0) / 0 lux (IR on)
S/N ratio > 48dB (AGC off)
lens
(standard)
focal length f3.6mm / f2.0
lens angle 92°
electronic shutter 1/50 to 1/100 000 sec
AGC yes
white balance automatic
PIR detection range 5m
detection angle 40°
video output 1.0 Vpp composite / 75 ohms
power supply 12VDC
current consumption 110mA (IR off), 260mA (IR on)
operating temperature 0°C~45°C
dimensions 90 x 145 x 32mm
weight 220g
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.velleman.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.