VeriFone P630-2 User manual

Verifone Part Number DOC560-334-EN-A, Revision A
P630-2
Installation Guide

All rights reserved. No part of the contents of this document may be reproduced or transmitted in any form without the written
permission of Verifone, Inc.
The information contained in this document is subject to change without notice. Although Verifone has attempted to ensure the
accuracy of the contents of this document, this document may include errors or omissions. The examples and sample programs are
for illustration only and may not be suited for your purpose. You should verify the applicability of any example or sample program
before placing the software into productive use. This document, including without limitation the examples and software programs, is
supplied “As-Is.”
Verifone Inc.
1-800-Verifone
www.verifone.com
Verifone Part Number DOC560-334-EN-A, Revision A
P630-2 Installation Guide
© 2023 Verifone, Inc.
Verifone and the Verifone logo, are registered trademarks of Verifone. Other brand names or trademarks associated with Verifone’s
products and services are trademarks of Verifone, Inc.
All other brand names and trademarks appearing in this manual are the property of their respective holders.
Product Warranty
For product warranty information, go to http://www.verifone.com/terms.
Comments? Please e-mail all comments on this document to your local Verifone Support Team.

P630-2 INSTALLATION GUIDE 3
CONTENTS
PREFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Organization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Conventions and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CHAPTER 1
Overview Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Back Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ease of Use and Ergonomics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Critical Security Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Contactless Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Wireless Communication Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CHAPTER 2
Setup Device Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Ease of Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Environmental Factors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Electrical Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Contactless Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PIN Protection Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Ensuring User Privacy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Inside the Shipping Carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SAM/TF Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installing or Changing SAM/TF Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Manual Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Attaching a Cable Connector to the
P630-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Connection to Another Verifone Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
RS-232 Connection Using an External Power Brick . . . . . . . . . . . . . . . . . . . 19
Ethernet Connection with External Power Brick . . . . . . . . . . . . . . . . . . . . . . 19
Smart Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Magnetic Stripe Card Reader Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Contactless Transactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Privacy Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Mounting Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
External Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Periodic Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CHAPTER 3
Specifications Unit Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

P630-2 INSTALLATION GUIDE 4
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
External Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Magnetic Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Primary Smart Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SAM Card Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
CHAPTER 4
Maintenance and
Cleaning
General Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Additional Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Surface Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Smart Card Reader Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Magnetic Stripe Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Decommissioning/Removal from Service . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
CHAPTER 5
Service and Support Returning a Device for Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Accessories and Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Stylus Pen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Stylus Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Cleaning Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
External Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Camera Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Camera Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
CHAPTER 6
Troubleshooting
Guidelines
Display Panel Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Keypad Does Not Respond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Transactions Fail to Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
APPENDIX A Caution and Warning Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

P630-2 INSTALLATION GUIDE 5
PREFACE
This guide is the primary source of information for setting up and installing the
P630-2 device.
Audience This guide is useful to the engineers who are involved in installing and configuring
the P630-2 device.
Organization This guide is organized as follows:
Chapter 1, Overview. Provides an overview of the P630-2 device.
Chapter 2, Setup. Explains how to set up and install the P630-2 device, select a
location and establish a connection with other devices.
Chapter 3, Specifications. Discusses power requirements and dimensions of the
P630-2 device.
Chapter 4, Maintenance and Cleaning. Explains how to maintain your P630-2
device.
Chapter 5, Service and Support. Provides information on how to contact your
Verifone representative or service provider and information on how to order
accessories and documentation from Verifone.
Chapter 6, Troubleshooting Guidelines. Provides troubleshooting guidelines,
should you encounter a problem in device installation.
Appendix A, Caution and Warning Messages. Shows the UL/cUL certification-
compliant translations of all Warning and Caution messages in this installation
guide.
Related
Documentation
To learn more about the P630-2 device, refer to the following set of documents:
P630 Certifications and Regulations VPN DOC560-101-EN
P630 Quick Installation Guide VPN DOC560-102-EN
P630 Camera Quick Installation Guide VPN DOC560-103-EN
P630 Installation Guide VPN DOC560-333-EN

PREFACE
Conventions and Acronyms
P630-2 INSTALLATION GUIDE 6
Conventions and
Acronyms
This section describes the conventions and acronyms used in this guide.
Table 1 describes these conventions and provides examples of their use.
Various acronyms are used in place of full definition. Table 2 represents acronyms
and their definitions.
Table 1 Document Conventions
Convention Meaning Example
Blue Text in blue indicates terms that
are cross-references.
See Conventions and Acronyms.
Italics Italic typeface indicates book
titles or emphasis.
You must not use this unit
underwater.
The pencil icon is used to
highlight important information.
RS-232-type devices do not work
on the P630-2 communication
port.
The caution symbol indicates
hardware or software failure, or
loss of data.
The unit is not waterproof or
dustproof and is intended for
indoor use only.
The lightning symbol is used as a
warning when a bodily injury
might occur.
Due to the risk of shock do not
use the unit near water.
NOTE
CAUTION
WARNING
Table 2 Acronym Definitions
Acronym Definitions
3DES Triple Data Encryption Algorithm
AC Alternating Current
ANSI American National Standards Institute
cUL Underwriters' Laboratories of Canada
DC Direct Current
DUKPT Derived Unique Key Per Transaction Method as defined in the
VISA’s POS Equipment Requirement: PIN processing and Data
Authentication, International Version 1.0, August 1988
ECR Electronic Cash Register
EMV Europay, MasterCard, and Visa
ISO International Organization for Standardization
MRA Merchandise Return Authorization
MSAM Multiple Secure Access Module

PREFACE
Conventions and Acronyms
P630-2 INSTALLATION GUIDE 7
LAN Local Area Network
LCD Liquid Crystal Display
LED Light-Emitting Diode
PED PIN Entry Device
PIN Personal Identification Number
POS Point-of-Sale
RS-232 Recommend Standard number 232
SAM Secure Access Module
TF Trans Flash
UL Underwriters Laboratories
USB Universal Serial Bus
VPN Verifone Part Number
Table 2 Acronym Definitions (continued)
Acronym Definitions

P630-2 INSTALLATION GUIDE 8
CHAPTER 1
Overview
The P630-2 is Verifone’s next-generation integrated retail PINpad device. Its
touchscreen functionality and sophisticated design are perfect for high-end retail
establishments.
The P630-2 device is a consumer-facing handheld device. It can also be fix-
mounted in integrated retail scenarios. The product’s design is equally appealing
as a handheld PINpad and robust enough to look and function appropriately in a
fixed mount setting.
The Verifone P630-2 device allows electronic payment transactions to be
processed. This payment processing solution with a fully integrated POS can scan
barcodes, QR codes and products with the help of an integrated camera.
It can run on Android applications, like loyalty and inventory. It also enables clients
to remotely monitor and update their devices using Verifone’s estate management
solution. The P630-2 device supports Bluetooth and Wi-Fi and meets PCI-PTS 6.x
SRED requirements for maximum security.
The Verifone P630-2 device supports all payment methods - magnetic stripe,
EMV, and NFC/Contactless Reader, including Apple Pay, Google Pay, and
Samsung Pay mobile wallets. The easy-to-read color touch screen supports all
payment-related user interactions and keypad for secure PIN entry.
Figure 1 P630-2 Touch
Features and
Benefits
The P630-2 includes the following features:
•Capacitive touch LCD
#ARD3LOT
4OUCH3CREEN
-AGNETIC#ARD3LOT

OVERVIEW
Features and Benefits
P630-2 INSTALLATION GUIDE 9
•Secure keypad supporting 3x5 matrix containing 0-9, *, #, Cancel, Backspace/
Clear and Enter keys
•Supports telco-style format
•Dual-function Backspace/Clear key
•Customer-entry for Cancel and Enter keys
Back Functions The rear of the P630-2 device shows the following:
•Cable connector compartment.
•Threaded grommets for attaching the mounting plate.
•A dual-stack (uSD+2SAMs) is built into the back of the unit to support stored-
value card programs or other merchant card requirements.
Ease of Use and
Ergonomics
•Sleek and stylish shape occupies minimal counter space.
•Bold, ergonomic design fits comfortably in the palm of a hand.
•Large, hard-rubber keys provide improved tactile feedback, minimizing errors
and maximizing ease of use for consumers of all ages.
•Intuitive telco-style interface and colored control keys simplify training and
reduce support requests.
•320 (RGB) x 480 TFT (HVGA) display with a capacitive touch panel.
•The rugged and reliable design.
•Connects with most POS payment terminals.
•Supports payment transactions in a variety of payment environments.
Critical Security
Protection
•Offers a choice of Master/Session or DUKPT key-management method to
protect PIN-based transactions.
•Offers secure, reliable PIN input for expanding the range of PIN-based
transactions.
•PCI-compliant for secure solutions, meeting the PED standard.
•Meets ISO and ANSI standards for PIN encryption, key management, and
MAC.
•The rugged and reliable design absorbs hard knocks found at point-of-sale
counters.
•Connects with most POS payment terminals, PCs and ECRs.
Security •Incorporates tamper-detection circuitry to resist unauthorized intrusion and
supports a broad spectrum of software-based security features.
•PCI PTS 6.x approved for debit and other PIN-based transactions.
•EMV Level 1 Type Approval.
•Supports reliable security available including TLS/SSL.

OVERVIEW
Features and Benefits
P630-2 INSTALLATION GUIDE 10
•With Kensington lock feature resident in the terminal as part of the case.
Contactless
Capability
•Advanced contactless architecture that future-proofs investment with a single
contactless interface (SingleCl), SoftSAMs and side-by-side application
architecture.
•On-screen tap zone for optimized user experience.
•Accepts EMV, NFC and mag-stripe contactless payments as well as PIN
based transactions.
Wireless
Communication
Capability
•Bluetooth:
•Supports BT v4.2 LE
•WLAN:
•Supports 2.4GHz/5.0GHz frequency band
•Supports 802.11 a/b/g/n/ac up to 433 Mbps
•Supports AP mode

P630-2 INSTALLATION GUIDE 11
CHAPTER 2
Setup
This chapter describes the setup procedure for the P630-2 in the following
sections:
•Device Location
•PIN Protection Measures
•Inside the Shipping Carton
•SAM/TF Cards
•Power Supply
•Cable Connections
•Smart Card Reader
•Magnetic Stripe Card Reader Use
•Contactless Transactions
•Optional Accessories
•Periodic Inspection
Device Location
Following are the guidelines used to select an ideal location for the terminal.
Ease of Use •Select a location convenient for both merchant and cardholder.
•Select a flat support surface, such as a countertop or table, or mount it on a
mounting stand supplied by Verifone.
•Select a location near a power outlet, POS, ECR, or computer connected to
the terminal. Do not string cables or cords across a walkway for safety.
Environmental
Factors
•Do not use the unit where there is high heat, dust, humidity, moisture, caustic
chemicals, or oils.
•Keep the unit away from direct sunlight and anything that radiates heat, such
as a stove or a motor.
•Do not use the terminal outdoors.
CAUTION
The terminal is not waterproof or dustproof. It is intended for indoor use only. Any
damage to the unit from exposure to rain or dust can void any warranty.

SETUP
PIN Protection Measures
P630-2 INSTALLATION GUIDE 12
Electrical
Considerations
•Avoid using this product during electrical storms.
•Avoid locations near electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical noise (for example, air
conditioners, electric motors, neon signs, high-frequency or magnetic security
devices, or computer equipment).
•Do not use the terminal near water or in moist conditions.
•Disconnect the device from its POS terminal before cleaning.
Contactless
Considerations
Avoid having metallic objects in the proximity of a contactless antenna. If you need
to mount the terminal to vertical or inclined surfaces, use a flat, non-metallic
mounting plate.
PIN Protection
Measures
Use the following techniques to provide effective screening of PIN-Entry Devices
(PEDs) during the PIN-entry process. You can use these methods in combination,
although in some cases a single method might suffice.
•Position the terminal on the check-in stand in such a way as to block visual
observation of the PIN-entry process. Examples include:
•Visual shields designed on the check-in stand. The shields may be solely
for shielding purposes or may be part of the general check-in stand design.
•Position the terminal so that it is angled in such a way that PIN spying is
difficult.
•Install the PED on an adjustable stand that allows consumers to swivel the
terminal sideways and/or tilt it forward/backward to a position that makes
visual observation of the PIN-entry process difficult.
•Position in-store security cameras so that the PIN-entry keypad is not visible.
WARNING
Do not use the terminal near water, including a bathtub, washbowl, kitchen sink
or laundry tub, in a wet basement, or near a swimming pool to avoid shock or
damage.
CAUTION
Using an enclosed metal frame or mount may negatively affect contactless
performance.

SETUP
Inside the Shipping Carton
P630-2 INSTALLATION GUIDE 13
The following table describes the two preferred mounting methods and the
recommended measures to protect against PIN capture in four observation
corridors:
Verifone also recommends instructions to the cardholder regarding safe PIN-
entry. This can be done with a combination of:
•Signage on the PED
•Prompts on the display, possibly with a click-through screen
•Literature at the point of sale
•A logo for safe PIN-entry process
Ensuring User
Privacy
Use the following guidelines to protect the user’s privacy when he enters his
Personal Identification Number (PIN):
•The area of visibility should not be larger than a cone taken from the number 5
key at an angle of 45° and covering an area of 270° directly in front of the user.
Inside the
Shipping Carton
Open the shipping carton and carefully inspect its contents for possible tampering
or shipping damage. The terminal is a secure product. Tampering causes it to
cease to function or to operate in an unsecured manner.
1Remove and inspect the contents of the shipping carton. The terminal ships in
multiple configurations. The carton may include all or any of the following:
•Device
•Connectivity cable
2Remove all plastic wrapping from the terminal and components.
Table 3 Mounting Methods and Protection Measures
Method Cashier Customer in
Queue
Customers
Elsewhere
On-site
Cameras
Countertop
without stand
Use signage
behind the
PED
Install so that
customer is
between PED and
next in the queue
No action
needed
Do not install
within view of
cameras
Countertop
with stand
No action
needed
Install so that
customer is
between PED and
next in the queue
No action
needed
Do not install
within view of
cameras
CAUTION
This device is a secure product, and any tampering can cause it to cease to
function or operate in an unsecured manner.
NOTE
Power supply, connectivity cubes and base modules are shipped separately or
depending on customer requirements.

SETUP
SAM/TF Cards
P630-2 INSTALLATION GUIDE 14
3Remove the clear protective film from the display.
4Save the shipping carton and packing material for future repacking or moving
of the device.
SAM/TF Cards You may need to install one or more security access module (SAM) cards or
replace the old cards.
To install or replace SD card:
1Turn off the terminal.
2Place the terminal face down on a soft and clean surface.
3Remove cable cover as shown in Figure 2.
4Insert the card into the slot.
Figure 2 SAM/TF Slots
Installing or
Changing SAM/TF
Card
To install or change TF or SAM card:
1Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
2Release the screw.
3Slide out and lift the compartment cover. The TF and SAM cardholders are
now accessible.
WARNING
Do not use a tampered or damaged unit. The unit comes equipped with tamper-
evident labels. If a label or component appears damaged, please notify the
shipping company and your Verifone service provider immediately.
4&
3!-
3!-
CAUTION
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.

SETUP
Power Supply
P630-2 INSTALLATION GUIDE 15
4Install the TF or SAM card by carefully sliding it into the slot until fully inserted.
Power Supply
Not all configurations and device contexts require the use of a power supply –
Verifone ships power supply with the terminal as required.
Contact your Verifone representative if you have changed the context in which the
terminal is used or have questions about which power supply should be used.
Disconnect the power pack cord from the power outlet before connecting a power
supply. Connect and route all cables between the terminal, ECR and PC before
plugging the power pack cord into a wall outlet or surge protector.
When the terminal has power and an application is loaded, the application starts
after the initial Verifone copyright screen and displays a unique copyright screen.
If no application is loaded, DOWNLOAD NEEDED appears on the display after
the initial Verifone copyright screen.
NOTE
Insert the card with the card’s gold contacts facing away from you, towards the
unit.
CAUTION
Using an incorrectly rated power supply can damage the unit or cause it not to
work properly. Use only a power pack with VPN PWR435-101- * - A (see Service
and Support for detailed power supply specifications).
WARNING
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors. Disconnecting power during a transaction can cause transaction data
files not yet stored in memory to be lost.
NOTE
Verifone recommends installing a power surge protector to protect against
possible damage caused by lightning strikes and electrical surges.

SETUP
Cable Connections
P630-2 INSTALLATION GUIDE 16
Manual Shutdown Press the power button on the left side for atleast 8 seconds, until the device
display turns off, to power off the P630-2 device.
Figure 3 Power Off
Cable
Connections
The P630-2 has several cabling scenarios, depending on what it connects to:
1Connection to Another Verifone Terminal.
2RS-232 Connection Using an External Power Brick.
3Ethernet Connection with External Power Brick.
Attaching a Cable
Connector to the
P630-2
The cables first have to be attached to the P630-2. To attach a cable to the
terminal, follow steps:
Step 1: Release the screw.
Step 2: Slide out the cable cover.
Step 3: Attach the 28-PIN connector of the cable to the terminal.
Step 4: Slide in the cable cover.
WARNING
Turn off or unplug the terminal when connecting or disconnecting the device to
avoid device memory corruption and data loss.
Refer to the controlling device instructions for any terminal-specific warnings.

SETUP
Cable Connections
P630-2 INSTALLATION GUIDE 17
Step 5: Fix the screw.
Figure 4 Using the Connector
Connection to
Another Verifone
Terminal
The P630-2 can be powered by another Verifone terminal by Serial Connection.
Serial Connection
•Configuration 1 - P630-2 to V200c
The P630-2 device is powered by the Countertop terminal via USB where the
output power of the V200c.
Connect the 28-pin connector of the coiled serial cable (Connected to MOD 10
port, cable VPN - CBL435-002-01-A) to P630-2, then insert the other end of
the cable to the multi-communication port of V200c.
Figure 5 Connecting to P630-2 via Serial Connection
•Configuration 2- P630-2 Full Feature
The PINpad accessories on the opposite side is to connect the PC and the
Electronic Cash Register (ECR) connection.
22

SETUP
Cable Connections
P630-2 INSTALLATION GUIDE 18
Figure 6 Connecting P630-2 to an External Device
/2
/2
!
"
#

SETUP
Cable Connections
P630-2 INSTALLATION GUIDE 19
RS-232 Connection
Using an External
Power Brick
A special dongle cable is used, where one end of the cable plugs into the P630-2
while the other end terminates into the DB-9 connector housing. On the housing,
a DC jack is provided to connect to an external power brick. This is a generic
cable for all RS232-based hosts (VPN - CBL282-031-XX-A).
Figure 7 Connecting to RS232-Based Host
Ethernet
Connection with
External Power
Brick
To connect the terminal to other devices via Ethernet, use the cable with a
junction box that provides a standard RJ-45 LAN socket, a mini-USB port, and a
standard DC jack for an external power connection.
The junction box comes in these configurations:
Cable Configuration Part Number
Ethernet with RS232 Junction box with RJ-45 socket (for
connecting the device to LAN
infrastructure), MOD-8 socket for
RS232 & DC-in jack
CBL282-006-01-B
Ethernet with RS232
and Mini-USB option
Junction box with RJ-45 socket (for
connecting the device to LAN
infrastructure), MOD-8 socket for
RS232, Mini USB & DC-in jack
CBL435-005-02-A
Ethernet with RS232
and USB option
Junction box with RJ-45 socket (for
connecting the device to LAN
infrastructure), MOD-8 socket for
RS232, Mini USB, type A USB & DC-in
jack
CBL435-044-01-A

SETUP
Smart Card Reader
P630-2 INSTALLATION GUIDE 20
The figure below shows the connections available on the external power brick.
Figure 8 Available Connections on the External Power Brick
Smart Card
Reader
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
Figure 9 Using the Smart Card Reader
2
3
2-SR








